Jackery Explorer 100 Plus User manual

Plus
DISPLAY
Plus
DISPLAY
Model: JE-100A
USER MANUAL
Jackery Explorer 100 Plus
Version: JAK-UM-V1.0
Contact us:
[email protected]

CONTENTS
GB English 01-07
FR Français 08-14
36-42
ES Español 29-35
DE Deutsch 15-21
IT Italiano 22-28
Português
PT
More language versions are supported.
Other language versions of the manual can be downloaded on our official website:
https://de.jackery.com/pages/user-guides

GB Model: JE-100A
English
01
Congratulations on your new Jackery Explorer 100 Plus. Please read this manual
carefully before using the product, particularly the relevant precautions to ensure
proper use. Keep this manual in an accessible place for frequent reference.
In compliance with laws and regulations, the right of final interpretation of this
document and all related documents of this product resides with the Company.
Please kindly notice that no further notifications will be given in case of any update,
revision or termination.
TECHNICAL SPECIFICATIONS
Product Name:
Model No.:
Cell Chemistry:
Internal Battery:
Weight:
Dimensions:
Cycle Life:
USB-A Output:
USB-C1/C2 Output:
PPS:
USB-C1+USB-C2 Output:
USB-C1/C2+USB-A Output:
USB-C1+USB-C2+USB-A Output:
USB-C1/C2 Input (PD Input):
USB-C1/C2 Input (Car Input):
USB-C1/C2 Input (Solar Input):
Charge Temperature:
Discharge Temperature:
Jackery Explorer 100 Plus
JE-100A
LiFePO4
6.2Ah/16V 99.2Wh equal to 31000mAh 3.2V
Around 2.13 lbs / 965 g
4.96 x 3.41 x 3.43 in / 12.6 x 8.65 x 8.7 cm
2000 cycles to 80%+ capacity
18W Max, 5V⎓3A, 9V⎓2A, 12V⎓1.5A
100W Max, 4.5V⎓5A, 5V⎓3A, 5V⎓4.5A, 9V⎓3A,
12V⎓3A, 15V⎓3A, 20V⎓5A
5-21V⎓5A, 100W Max
110W Max
118W Max
128W Max
100W Max, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓5A
60W Max, 11-17.5V⎓5A
100W Max, 18-27.2V⎓5A
32℉~104℉(0°C~40°C)
14℉~104℉(-10°C~40°C)
CERTIFICATIONS
USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
® ®

USB-A Output
USB-C1 USB-C2
USB-C Input/Output
DISPLAY Button
LCD
Plus
DISPLAY
Plus
DISPLAY
Plus
DISPLAY
Plus
DISPLAY
PACKAGE LIST
USB-C Charging
Cable
Jackery Explorer 100 Plus DC8020 to USB-C
Adaptor User Manual
GET TO KNOW YOUR GEAR
Product Appearance
LCD DISPLAY
02
GB
Output Power
Remaining
Discharge Time
Remaining Battery Percentage
Input Power
Remaining
Charge Time
Battery Power
Indicator
7
9
4
6
5
1
2
3
Energy
Saving Mode
Low Battery Indicator Always-on Display Mode
8
Plus
DISPLAY
Plus
DISPLAY
Model:JE-100A
USER MANUAL
Jackery Explorer 100 Plus
Version:JAK-UM-V1.0
Contactus:
[e-mail]

Battery Power Indicator
When the product is being charged, the orange circle around the battery
percentage will light up in sequence. When charging other devices, the
orange circle will stay on.
Low Battery Indicator
When the battery is less than 20%, the Low Battery Indicator will stay on.
When less than 5%, the Low Battery Indicator will flash. When it is being
charged, the Indicator will be o.
Energy Saving Mode
The Energy Saving Mode is disabled by default. When the Energy Saving
Mode is enabled, this occurs if the product is not connected to any
device or the USB output power is less than or equal to 2W, the product
will automatically turn o all outputs after 12 hours.
To turn o the Energy Saving Mode
Long press the DISPLAY Button until the Energy Saving Mode icon disappears.
To turn on the Energy Saving Mode
Long press the DISPLAY Button until the Energy Saving Mode icon lights up on the
screen. Switching on the Energy Saving Mode enables the product to continuously
charge devices less than or equal to 2W.
Fault code
In order to respond to the feedback quickly, we set up common fault
codes F1, F2, F3 in the system: If any codes appear, please remove the
load or unplug the charging plug, the product can restore by itself, if not,
please contact after-sales service.
High-temperature warning
If it appears on the screen, do not worry, the battery will restore
automatically after cooling.
Low-temperature Warning
If it is displayed on the screen, do not worry. It will automatically restore
after the ambient temperature is restored.
03
GB
Always-on Display Mode
After the display screen lights up, double-click the DISPLAY Button and
the mode of Always-on display will be on, then press it again to turn o
the screen.