Jaeger-leCoultre Q2662530 User manual

ENGLISH
CONTENTS
Introduction 24
Accuracy and precautions for use 24
Water resistance 25
“1000 Hours Control” test 28
Care instructions for leather straps 29
Use Reverso Classic Small Duetto 30
Use Reverso Classic Medium Duetto 34
(Manual winding)
Use Reverso Classic Medium Duetto 37
(Automatic winding)
International Guarantee 40
Limited Warranty 44
(United States of America and Canada)
Guarantee for Australia 48
Customer Service 53

24
INTRODUCTION
We would like to thank you for the confi-
dence you have placed in Jaeger-LeCoultre.
Our Maison has applied all its expertise and
exacting standards to the creation of this
model.
We invite you to consult the operating ins-
tructions and hope your Jaeger-LeCoultre
timepiece brings you great joy.
ACCURACY AND
PRECAUTIONS FOR USE
MANUALLY-WOUND OR AUTOMATIC
MECHANICAL WATCHES
The accuracy of watch models with
mechanical movements is determined by
the balance wheel. Despite all the care that
the master watchmakers of the Jaeger-
LeCoultre Manufacture have lavished on
building and assembling your watch, its

25
ENGLISH
accuracy is subject to the influence of gra-
vity, magnetic fields, accidental impacts,
and the ageing of the oils. The accuracy
of a watch is measured by its regularity of
rate in various positions.
Your individual activities could be the cause
of slight irregularities in the working of
your timepiece. If you observe a discrepan-
cy in the way your watch runs, we advise
you to entrust it to an authorised Jaeger-
LeCoultre retailer who will make the neces-
sary adjustments. Watches with mecha-
nical movements must not be used for
sports involving significant risk of impact
or abrupt actions, such as golf or tennis.
WATER RESISTANCE
Your Jaeger-LeCoultre watch is water-
resistant to 3 bar. Its water resistance can
be identified by the symbol and/or
the engraving: “3 bar” on the caseback.
This means that your model has been
tested at an overpressure of 3 bar, corre-

26
sponding to an immersion pressure of 30
metres (1 bar = ±10 metres).
In accordance with the ISO 22810/NIHS
92-20 standard, in order to guarantee the
durability of the watch’s characteristics
over time, and as water resistance may be
aected by certain activities, it is recom-
mended that you:
- have the watch’s water resistance checked
by an authorised Jaeger-LeCoultre retailer
at least once every two years. It is essen-
tial to have such a check carried out each
time your watch is opened, and before any
period in which it is liable to undergo pro-
longed and/or regular immersions.
- check when making the purchase that the
bracelet is suitable for the intended use.
- avoid subjecting the watch to excessively
abrupt temperature changes.
- protect the watch from being dropped or
suering other accidental impacts, and
have the water resistance checked after
any severe impact.

27
ENGLISH
- avoid using the controls, push-piece, or
time-setting crown while under water, or
outside the water, if the watch is not yet
dry after immersion.
- restore the time-setting crown and the
push-pieces to their normal positions, (or
where applicable, close the compression
keys) after every manipulation.
- rinse the watch with fresh water after use
in sea water.
You may use your watch while swimming
as long as you do not exceed the immer-
sion pressure and do not engage in any
water sports that could cause impacts.
This watch is not a piece of diving equip-
ment and should not be used as such. Also,
note that leather straps are not suited for
aquatic activities.

28
“1000 HOURS CONTROL”
TEST
The Jaeger-LeCoultre Manufacture pays
close attention to the quality and to the
final checks of its watches.
The 1000 Hours Control is a series of in-
ternal qualification tests for each of the
models in our collection, as well as inter-
nal tests on the production of your watch,
which go beyond ocial timing tests.
These tests include checks of the move-
ment before and after being cased up
in the watch and cover the whole watch
once it has been assembled, in the condi-
tions closest to daily wear.
The “1000 Hours Control” legend, or the
“” seal engraved on the back of the
watch certifies that each of the models
from our collection has successfully under-
gone all of the qualification tests, and that
your watch has successfully undergone
all of the production tests. These ensure
regularity of rate, resistance to variations

29
ENGLISH
in temperature and atmospheric pressure,
ability to withstand shocks and magnetic
fields, as well as water resistance.
CARE INSTRUCTIONS
FOR LEATHER STRAPS
1. Keep the leather strap in a dry place
2. Avoid contact with water, cosmetics,
perfumes, alcohol and oily materials
3. To prevent leather from discolouring,
avoid wearing the watch:
- in a highly humid environment
- during a sporting activity: sweat dam-
ages the leather
- in prolonged exposure to sunlight
4. Wipe with a dry and soft fabric. Do not
dry in direct sunlight or near heat sources

30
REVERSO CLASSIC
SMALL DUETTO
1
3
2
2
3
1
1Hour hand
2Minute hand
3Crown

31
ENGLISH
TECHNICAL
CHARACTERISTICS
- Manually wound mechanical movement,
Jaeger-LeCoultre Calibre 844.
- 21,600 vibrations/hour.
- Power reserve: approximately 38 hours.
MOVEMENT
Jaeger-LeCoultre Calibre 844

32
USE
01
WINDING
Crown in position 0.
Winding is performed by turning the
crown clockwise. The watch is fully wound
when the crown locks.
Do not attempt to wind a manually-wound
watch beyond the locking point.
To ensure good operating accuracy, it is
advisable to wind your watch regularly, at
least once a day.

33
ENGLISH
SETTING THE HOURS AND MINUTES
Pull the crown out to position 1.
Move the hands clockwise until the de-
sired time is displayed.
The time being identical and synchro-
nised on both dials, you can perform set-
ting on either of the two faces.
When the operation is completed, push
the crown back to position 0.

34
REVERSO CLASSIC
MEDIUM DUETTO
(MANUAL WINDING)
1
3
2
2
3
1
1Hour hand
2Minute hand
3Crown

35
ENGLISH
TECHNICAL
CHARACTERISTICS
- Manually wound mechanical movement,
Jaeger-LeCoultre Calibre 854.
- 21,600 vibrations/hour.
- Power reserve: approximately 42 hours.
USE
WINDING
Crown in position 0.
The watch is wound by turning the crown
clockwise.
Do not attempt to wind a manually-wound
watch beyond the locking point.
To ensure good operating accuracy, it is
advisable to wind your watch regularly, at
least once a day.

36
01
SETTING THE HOURS AND MINUTES
Pull the crown out to position 1.
Move the hands clockwise until the de-
sired time is displayed.
Since the time is identical and synchro-
nised on both dials, you can perform the
setting on either of the faces.
When the operation is complete, push the
crown back to position 0.

37
ENGLISH
REVERSO CLASSIC
MEDIUM DUETTO
(AUTOMATIC WINDING)
1
3
2
2
3
1
1Hour hand
2Minute hand
3Crown

38
TECHNICAL
CHARACTERISTICS
- Self-winding mechanical movement,
Jaeger-LeCoultre Calibre 968.
- 28,800 vibrations/hour.
- Power reserve: approximately 38 hours.
USE
01
STARTING THE WATCH
Crown in position 0.

39
ENGLISH
A few clockwise turns of the crown are
sucient to start your watch. It will then
automatically wind up when you wear it.
Please note that the crown does not lock
when winding, even when the watch is ful-
ly wound.
SETTING THE HOURS AND MINUTES
Pull the crown out to position 1.
Move the hands clockwise until the de-
sired time is displayed.
Since the time is identical and synchro-
nised on both dials, you can perform the
setting on either of the faces.
When the operation is complete, push the
crown back to position 0.

40
JAEGER-LECOULTRE
WATCHES
In order to benefit from the Internation-
al Guarantee and/or the Limited War-
ranty and/or the Manufacturer’s Guar-
antee for Australia, Jaeger-LeCoultre
products must be purchased exclusively
from authorised Jaeger-LeCoultre retail-
ers or from Jaeger-LeCoultre Boutiques.
Maintenance and repair work must be en-
trusted to an authorised Jaeger-LeCoultre
retailer, a Jaeger-LeCoultre Boutique, or
an authorised Jaeger-LeCoultre Service
Centre. If these conditions are not met,
the manufacturer’s guarantee does not
apply. Please contact Jaeger-LeCoultre
to obtain the list of authorised Jaeger-
LeCoultre retailers across the world.

41
ENGLISH
INTERNATIONAL
GUARANTEE
The International Guarantee applies to
Jaeger-LeCoultre products sold or pre-
sented for guarantee repairs in all coun-
tries, except the United States of Ameri-
ca and Canada (for these two countries,
see the Limited Warranty) and Australia
(for this country, refer to the Guarantee
for Australia).
TERMS AND CONDITIONS OF
THE J AEGER-LE C OULTRE
INTERNATIONAL GUARANTEE
Your Jaeger-LeCoultre watch is guaran-
teed to protect against all manufacturing
defects for two years from the date of pur-
chase, subject to the following conditions.
Any part found by our technical services
to be defective as a result of a manufac-
turing defect will, at the sole discretion of
Jaeger-LeCoultre, be repaired or replaced
free of charge. The Jaeger-LeCoultre In-

42
ternational Guarantee is valid only if the
guarantee certificate enclosed with this
booklet has been duly completed, dated,
stamped, and signed by the authorised
Jaeger-LeCoultre retailer or the Jaeger-
LeCoultre Boutique, which sold you your
watch.
The Jaeger-LeCoultre International Guar-
antee does not cover defects resulting
from accidents, mishandling, or incorrect,
abusive use (for example, knocks, dents,
crushing, excessive temperatures, power-
ful magnetic fields), the use of or eect
of using batteries other than those des-
ignated by Jaeger-LeCoultre, unauthor-
ised alteration or repair, the consequences
of normal wear and ageing of the watch,
strap, or glass, the loss of water resistance
after two years from the date of purchase,
if your watch is water-resistant, or any de-
fect resulting from contact with water, if
your watch is not water-resistant.
Jaeger-LeCoultre water-resistant watches
can be identified by the symbol and/or