Jason.L Litewall User manual

ASSEMBLY INSTRUCTIONS
Litewall Workstation
3 Person Run
Size: 1200mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set.
2 persons required for installation

Legs x2
Outer Beams x4 (1000mm)
Central Beams x2 (800mm)
Connector Frame x1
Connector Frame T Legs x1
Feets x5
1
2
3
4
5
6
M8x25mm Dome Head x8
M6x40mm Hex Head x16
M6x35mm Hex Head x2
7
8
9
COMPONENTS
SCREWS
ASSEMBLY INSTRUCTIONS
Litewall Workstation
3 Person Run
Size: 1200mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
1
7
6
9
5
3
2
8
4

ASSEMBLY INSTRUCTIONS
Litewall Workstation
3 Person Run
Size: 1200mm
Screw the feet to each leg and T leg. Assemble connector frames. Attach the x2 T leg to the connector frames using
M6x35mm hex scews x4.
Attach x2 Central Beams (800mm) to the connector frames using M8x25mm
dome head screw.
Attach x2 Outer Beams (1000mm) to leg using M8x25mm dome head screw.
Attach connector frame from diagram 2 to 2 beams using M8x25mm dome
head screws. Do the same procedure for the opposite side. Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
0201
03 04

Attach tops to frame by tightening M6x40mm through beams & into tops.
ASSEMBLY INSTRUCTIONS
Litewall Workstation
3 Person Run
Size: 1200mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05