Jason.L San Fran 2 Person Run Workstation User manual

Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

1
8
5
7
4
2
3
9
10
6
11
12
INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Table Top (1200x800) x2
Leg x6
Adjustable Foot x6
Leg Cable Cover x6
San Fran Beam 920mm x4
San Fran Beam 120mm x3
T connectors x2
T connectors Cap x2
90 Degree connectors x4
90 Degree connectors Cap x4
1
2
3
4
5
6
7
8
9
10
M8x12mm Dome Head x14
M8x20mm Cap Head x6
M5x20mm Self Tapping x12
11
12
13
COMPONENTS
SCREWS

INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200mm
01 02
03
Slide the 2 way and 3 way connectors over each leg, and securely
lock into place using M8x20mm cap head screws (12).
Securely connect legs to rails lenghts using M8x12mm dome head screws (11).
Securely connect legs to rails widths using M8x12mm dome head screws (11). Ensure the worksurface is centered over the frame.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
04

Drill all M5x20mm self tapping screws (13)
through each leg into the worksurface. Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05 Optional