Jason.L Sapphire Boardroom User manual

Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is suciently rigid.
Failure to do this may aect stability once the tops are attached.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
Sapphire
Boardroom
Size: 2400mm x 1200mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Page 2 of 4
INSTALLATION GUIDE
Sapphire
Boardroom
Size: 2400mm x 1200mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
COMPONENTS
STEP 2STEP 1
A * 2 B * 2
C * 2
G * 18 woodscrews H * 2 joiner plates
D * 6 (M8*30mm)
E * 6 (M8*30mm) F * 1

Page 3 of 4
INSTALLATION GUIDE
Sapphire
Boardroom
Size: 2400mm x 1200mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 3 STEP 4
Adding the tops
Screw the table tops to the
bases using woodscrews (G)
through the following holes.
NB: Ensure the screws are
no longer than 25mm.
Ask a second person to
help turn the table and
base over.
Careful: tables are heavy.
G

Page 4 of 4
INSTALLATION GUIDE
Sapphire
Boardroom
Size: 2400mm x 1200mm
STEP 5 STEP 6 STEP 7
Bring two table tops towards one another.
Align the pins in the side of each top.
Rotate cam to tighten
the tops together.
Use two joiner plates (H) to further secure
the two tops together, using the 8 wood
screws provided.
bottom view
of table top
H
Need help!
Call us on
1300 527 665
www.jasonl.com.au