Jazwares Fortnite User manual

Please save this instruction sheet, it contains important information.
1 2 3
Raised
INSTRUCTION MANUAL
Tab
Jack
CONTENTS
1
2
34
1Peg
2Tab
3Jack
4Socket
Even fit
Raised
CLOK TWER
11
Lay pieces on a flat surface and align them.
2
Arrange the pieces so that one peg sits inside the corresponding opening.
The other side should be slightly raised.
4
Repeat steps 1 - 3 to create different configurations.
5
Hinge at connection points to create 3D structures.
6
To dismantle, hold pieces and twist gently to release. To prevent broken nails or minor injury, do not use
fingernails to pulls pieces apart.
TIP: Always keep at least one
side open on all 3D structures
to ensure pieces can be
removed.
3
Place your thumb on the raised side of the tab and firmly apply pressure to snap into place.
FNT0199
Made in China
Used with permission. Manufactured and Distributed by:
Jazwares, LLC, Sunrise, FL 33326, USA
Jazwares, 16A Crane Grove, London, N7 8LE, United Kingdom
Jazwares GmbH, Mina-Rees-Str. 8, 64295 Darmstadt, Germany
www.jazwares.com / www.jazwares.de
© 2019 Epic Games, Inc. Fortnite and its logo are registered trademarks of
Epic Games, Inc. in the USA (Reg. U.S. Pat. & Tm. O.) and elsewhere.
All rights reserved.
BASE (X4) WALL (X4) CLOCK (X4)
HALF WALL (X4)
BALCONY (X4)FLOOR (X1)
ROOF (X1)
Pull tab to activate
light up function.
2 x 1.5V LR41/AG3 FOR EACH
10 x 1.5V LR41/AG3
BATTERIES INCLUDED
(The batteries are not replaceable).
LIGHT UP
ACCESSORIES
Protect the environment by not disposing of this
product with household waste. Check your local
authority for recycling advice and facilities.

4 5 6
11
Asembly Asembly Asembly
Assemble the 4 BASE pieces.
12
Assemble the 4 HALF WALL pieces.
13
Attach the assembled HALF WALL section to
the assembled BASE section.
14
Assemble the 4 WALL pieces.
15
Attach the assembled WALL section to
the assembled HALF WALL section.
16
Assemble the 4 CLOCK pieces.
17
Attach the assembled CLOCK section to
the assembled WALL section.
18
Insert the FLOOR.
19
Assemble the 4 BALCONY pieces.
110
Attach the assembled BALCONY section to
the assembled CLOCK section.
111
Attach the ROOF to the assembled BALCONY section.
This completes the assembly process.