Jazwares MARVEL SPIDEY and his AMAZING FRIENDS SPIDEY WEB CRAWLER... User manual

User Guide
Spidey Web Crawler RC (1)
Remote Control (1)
Spidey Web Crawler RC
INCLUDES:
Congratulations on your purchase of the Spidey Web Crawler RC.
Please read all information in this guide thoroughly for
battery replacement and usage instructions.
SNF0023
3
+
BATTERY SAFETY INFORMATION
• Batteries are to be replaced by an adult.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• For best performance only the recommended batteries or their equivalent are to be used.
• Batteries must be inserted with correct polarity.
• Do not mix new and used batteries.
• Do not mix dierent types of batteries.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
FCC ID for vehicle: YNIJAZWARES023
FCC ID for Remote Control: YNIJAZWARES23A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING! Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
HOW TO CLEAN:
• To clean, wipe with a cloth.
• Do not submerge in water.
• Do not use chemical or abrasive cleaners.
Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.
MADE IN CHINA
IMPORTANT:
PLEASE SAVE THIS INSTRUCTION SHEET.
IT CONTAINSVALUABLE PRODUCT INFORMATION.
PROBLEMS?
DO NOT RETURNTO STORE
Please Call Us: 1.800.370.1827
(U.S. Customers Only)
Used with permission. Manufactured and Distributed by:
Jazwares, LLC, Sunrise, FL 33326, USA
Jazwares, 16A Crane Grove, London, N7 8LE, United Kingdom
Jazwares GmbH, Mina-Rees-Str. 8, 64295 Darmstadt, Germany
www.jazwares.com / www.jazwares.de
DO NOT sit or stand on any parts of the toy.
DO NOT drop or throw the toy.
DO NOT expose the toy to moisture of any kind.

VEHICLE
(Bottom View)
FRONT
REAR
(Not Included)
3
AA
Size (1.5V)
ALKALINE
BATTERIES
+ -
+ -
+ -
ON /OFF Switch
(Note: Switch to ON
position to play.)
OFF
ON
Close Open
REMOTE CONTROL
(Bottom View)
ON /OFF Switch
(Note: Switch to ON position to play.)
OFF ON
(Not Included)
2
AAA
Size (1.5V)
ALKALINE
BATTERIES
+ -
+ -
Close
Open
INSTRUCTIONS
2 3
BATTERY INSTALLATION INSTRUCTIONS (ADULT INSTALLATION REQUIRED)
RC vehicle requires 3 x 1.5 V AA batteries and Remote Control requires 2 x 1.5 v AAA batteries
(not included). Batteries included for“TRY ME” purposes. Replace with fresh batteries if needed.
1. Move the switch on the product to the OFF position. Use a Phillips Head screwdriver
(not included) to remove cover.
2. Remove the old batteries and insert the new 3 x 1.5 V AA batteries for the RC vehicle and the new 2 x
1.5 v AAA batteries for the remote control with the correct polarity indicated inside the box. Screw the
cover back in.
3. Move the switch to the ON position to activate the product feature. Move the switch to
the OFF position when not in use to help save battery life.
Press button to drive forward
Press to drive in reverse
NOTES & TROUBLESHOOTING
Turn Spidey Web Crawler RC and Remote Control settings to “ON”and use
the remote control to steer your new Spidey Web Crawler RC.
Press button to
turn wheels right
Press button to
turn wheels left
Forward Left Turn Forward Right Turn Backwards Left Turn Backwards Right Turn
NOTE: To make the Spidey Web Crawler RC turn while in motion,
two buttons must be pressed simultaneously.
• Remote Control will function up to a distance of approximately 32 feet (10 meters) from the
Spidey Web Crawler RC.
• If the Remote Control is not used for more than 3 minutes, then the vehicle will enter Sleep Mode.
To exit Sleep Mode, turn the vehicle switch o and on again.
• Fresh batteries will allow the Spidey Web Crawler RC to function continuously for
approximately 20 minutes.
• Remote Control does not transmit well through obstacles such as buildings, metal structures,
and trees.
• Replace batteries if the Spidey Web Crawler RC does not operate normally or signal range
decreases noticeably.
• Spidey Web Crawler RC performs best on at surfaces and will not work well on high pile carpet
oors or very rough surfaces.
HOW TO PLAY
If the vehicle runs to the
right, turn the bottom
switch toward the “L”
If the vehicle runs to the
right, turn the bottom
switch toward the “R”
CALIBRATION TROUBLESHOOTING: To recalibrate the Spidey Web Crawler RC,
ip the vehicle over and adjust the button located between the two front wheels:
L RL R