JBL Harman Tune 660NC User manual

quick
start
guide

WHAT’S
IN THE
BOX

POWER ON AND
AUTOMATICALLY ENTER PAIRING MODE
Choose "JBL TUNE660NC" to connect
power
on &
connect
ON
• now
JBL TUNE660NC
Tap to pair. Device will be tied to
Your Google Account
Settings Bluetooth
Bluetooth
DEVICES
Now Discoverable
Connected
JBL TUNE660NC
OTHERS Android 6.0+
>2S

Manual
Pairing
Choose "JBL TUNE660NC" to connect
Manual pairing mode
POWER OFF
>5S
Manual
Pairing
ON
Settings Bluetooth
Bluetooth
DEVICES
Now Discoverable
Connected
JBL TUNE660NC

BUTTON COMMAND
×22
×1
×1
Siri®
Google Assistant
Bixby
×1×1
×1
>2S
>2S
ANC ON/OFF
>2S
>2S
×1

Multi-point
connection
ENTER PAIRING MODE WITH THE 2nd DEVICE
(Maximum 2 devices)*
>2S

1To switch music source, pause the
music on the current device and select
play on the 2nd device.
2Phone call will always take priority.
3If one device goes out of bluetooth range
or powers off, you may need to manually
reconnect the remaining device.
4SELECT “forget this device” on your
bluetooth devices to disconnect
multi-point.
1st
bluetooth device
2nd
bluetooth device
Choose "JBL TUNE660NC" to connect
ON
Settings Bluetooth
Bluetooth
DEVICES
Now Discoverable
Connected
JBL TUNE660NC

Charging
2HR
2HR5MIN

led
behaviors
Low battery
CHARGING
FULLY CHARGED
ANC ON
BT CONNECTING
BT connected
POWER ON/OFF

TECH
SPEC
Model: TUNE660NC
Driver Size: 32 mm / 1.26 ”Dynamic Driver
Power supply: 5V 1 A
Weight: 166 g / 0.366 lbs
Headset battery type: Polymer lithium-ion battery (610 mA / 3.7V)
Charging time: < 2 hrs from empty
Music playtime with BT on: up to 55 hrs
Music playtime with BT on and ANC on: 44 hrs
Music playtime with AUX and ANC on: 35 hrs
Frequency Response: 20 Hz – 20 kHz
Impedance: 32 ohm
Sensitivity: 100 dB SPL @ 1 kHz / 1 mW
Maximum SPL: 96 dB
Microphone sensitivity: -42 dBV @ 1 kHz / Pa
Bluetooth version: 5.0
Bluetooth profile version: A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth transmitter frequency range: 2.402 GHz – 2.480 GHz
Bluetooth transmitter power: < 10 dbm
Maximum operation temperature: 45 °C