JBL Control Control 29AV User manual

Control 29AV High Output Indoor/
Outdoor Monitor Speaker
®
Key Features:
䉴Extended bandwidth, extremely smooth
frequency response.
䉴110°x 85°HF coverage, rotatable horn.
䉴110 Watt transformer for 70V or 100V
lines, with 8Ωthru.
䉴SonicGuard
™
overload protection.
䉴200 mm (8”) Kevlar cone woofer,
25 mm (1”) titanium diaphragm
compression driver.
䉴Includes InvisiBall
™
mounting hardware,
plus ten 6 mm attachment points for
suspension and optional U-bracket.
䉴Sealed input panel cover and screw-
down input terminals.
The Control
®
29AV utilizes high power
components, computer optimized horn
and cabinet design and complex network
to achieve smooth high fidelity
performance, extended bandwidth and
well-controlled defined coverage from a
compact loudspeaker.
A rotatable high-frequency horn allows
use of the speaker in either vertical or
horizontal orientation. Smooth frequency
response and even coverage ensures
excellent sound character throughout the
listening area. Partial magnetic shielding
allows use of the speaker as close as
230 mm (9”) to video monitors.
The top-quality line distribution
transformer, designed for minimal
insertion loss and reduced saturation,
allows use of either 70V or 100V
distributed speaker lines. In bypass
position, the high 8Ωimpedance allows
use of multiple speakers on a loudspeaker
line.
The included InvisiBall mounting
method is simple to install, aims easily and
provides a high degree of theft deterrence.
InvisiBall allows horizontal rotation of up
to 41°off-axis and vertical rotation of up
to 36°(horn end inward) or 23°(woofer
end inward). Attachment points for the
optional MTC-29UB U-bracket allows for
compact installation and is particularly
useful for low profile underbalcony
applications.
Weather resistance has been maximized.
The woofer’s cone is made of kevlar,
surround is pure butyl rubber, and the
driver basket is rear loaded to minimize
direct exposure. The compression driver’s
diaphragm is pure titanium. The grille is
thermoset composite coated and comes
with foam to minimize incursion of water.
Nickel/zinc rust-resistant terminals ensure
a secure input connection. An MTC-PC2
sealed-entrance cover is included to
further protect the speaker’s terminals.
JBL’s exclusive SonicGuard overload
protection is virtually inaudible to the
listener, ensuring reliability while
providing full fidelity sound.
Professional Series
Available in black or white (-WH). The cabinet will accept a variety of paints to
match any décor.
Specifications:
Frequency Range (-10 dB)1: 40 Hz –19 kHz
Frequency Response (±3 dB)1: 45 Hz – 18 kHz
100 Hr Power Capacity 2: 300 Watts Continuous Program Power
150 Watts Continuous Pink Noise
Maximum SPL @ 1m3: Short-Term: 120 dB; Long-Term: 114 dB
Nominal Sensitivity4: 91 dB, 1W @ 1 m (3.3 ft)
Nominal Coverage Angle5: 110°H x 85°V, rotatable
Directivity Factor (Q): 7.2, averaged 500 Hz to 16 kHz
Directivity Index (DI): 8.6 dB, averaged 500 Hz to 16 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.3 ohms @ 230 Hz
Crossover Type: 3rd order High Pass, 2nd order Low Pass with
impedance compensation, 2.5 kHz crossover
frequency
Transformer Taps: 70V: 110W, 55W, 28W & 14W
100V: 110W, 55W, & 28W
Thru Position: 8Ωnominal
Recommended High-Pass: See chart
Transducers:
Low Frequency: 200 (8 in) kevlar cone with pure butyl rubber
surround, 50 mm (2 in) voicecoil on fiberglass
former
High Frequency: 25 mm (1 in) compression driver, pure titanium
diaphragm with patented JBL diamond surround
Physical:
Enclosure Material: High impact polystyrene
Grille: Thermoset composite coated steel
Overload Protection: Full-range power limiting to protect network and
transducers. Serviceable internal fuse to protect
during exceptional overload conditions.
Environmental: IEC 529 IP-X4 splashproof rating. Exceeds MilSpec
810 for humidity, salt spray, temperature & UV.
Passes Mil-Std-202F for salt spray.
Termination: Screw-down terminal strip, zinc plated copper
base, nickel plated metal screws/washers. Accepts
up to 9 mm outside 4 mm inside open lug (#6, #8
or #10 lug), plus bare wire (up to 12 AWG/2.5 mm
2
).
Safety Agency Rating: Transformer is listed per UL1876.
Colors: Black or white (-WH)
Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
Net Weight (ea): 12.2 kg (26.8 lbs)
Shipping Weight (ea): 14.0 kg (30.8 lbs)
Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall
mounting base, 6 mm x 260 mm InvisiBall Hex
wrench.
Optional Accessories: MTC-29CM to install speaker down from the ceiling
MTC-29UB U-bracket
1In Half-space.
2Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous
program power is defined as 3 dB above the Continuous Pink Noise Rating and is a conservative expression of the system’s
ability to handle normal speech and music program material.
3Calculated from sensitivity and power handling. Power compression not considered.
4Half-space, averaged 100 Hz to 10 kHz 5 2 kHz to 14 kHz
JBL continually engages in research related to product improvements. Changes introduced into existing products without notice
are an expression of that philosophy.

10
100
360
20 100 1000 10000 20000
-6 dB Beamwidth (degrees)
Fre
q
uenc
y
(
Hz
)
Horizontal
Vertical
Horizontal Off Frequency
Vertical Off Axis Frequency Response (down)
Vertical Off Axis Frequency Response (up)
Frequency Response, on axis in half space (2π, dotted
line) and full space (4π, solid line) at thru (8Ω) setting,
Input Impedance.
Directivity Index, Q
Beamwidth vs. Frequency
1.8 [46]
2.7 [68]
3.3 [84]
3.1 [79]
5.1 [130]
12°
2.75
[70]
2.00
[51]
3.5 [89] 2.75 [70]
ø0.27
[ø7]
C
/L10.9 [277]
15.2 [385]
12.0 [306 ]
C
/L
2.7
[68] 5.0 [127] 3.2 [82]
7.7 [195]
20.5
[520]
Dimensions in inches [mm]
4.3 [108]
䉴Control®29AV High Output Indoor/Outdoor Monitor Speaker

Horizontal 1/3 Octave Polars
Architectural Specifications:
The loudspeaker shall consist of a 200 mm (8 in) low frequency
transducer, 25 mm (1 in) compression driver, and frequency dividing
network. The low frequency driver’s voice coil shall be 50 mm (2 in) in
diameter.
Performance specifications of a typical unit shall be as follows: Usable
frequency response shall extend from 40 Hz to 18 kHz (10 dB below
rated sensitivity, half-space, no external equalization). Rated power shall
be at least 300 watts continuous program power for 100 continuous
hours duration (defined as 3 dB above a test signal of filtered random
pink noise conforming to IEC268-5). Measured sensitivity shall be at
least 91 dB-SPL (at 1 m [3.3 ft] with 2.83 V input, ave. 100 Hz to 10 kHz).
The input shall be switchable for use either at nominal 8 ohms, or on
a 70.7V or 100V distributed speaker line via built-in transformer.
Selectable taps shall nominally be 110W, 55W, or 28W on either a 70.7V
or 100V distributed speaker line, plus 14W on 70.7V line only.
The system shall be protected against damage from occasional
overpowering via full range limiting, which shall be inaudible during
activation. The compression driver shall be horn-loaded to cover 110
degrees by 85 degrees with a high degree of accuracy and the horn shall
be rotatable to achieve these coverages either in the horizontal or
vertical planes, regardless of cabinet orientation.
The cabinet and grille shall be paintable. The grille shall be secured
via screws to keep it in place when facing downward.
The low frequency transducer shall have woven kevlar cone and butyl
rubber surround, with the frame protected from direct weather
exposure. The compression driver shall be constructed with a titanium
diaphragm for weather resistance. The system shall withstand Mil Spec
810 testing with specified durations with no effect on its acoustical
performance or structural integrity: salt spray (method 509.3), tempera-
ture (method 501.3 and 502.3), humidity (method 507.3) and ultraviolet
(method 505.3). Further, it shall pass Mil-Std-202F (method 101D) for salt
spray. The system shall have an IEC 529 splashproof rating of IP-X4.
For theft-deterrence, the installation access area shall be hidden
behind a snap-out cover on the front grille. The included ball mecha-
nism shall be internal to the cabinet. The cabinet shall have ten (10) 6 mm
mounting points, including 2 on each side and 3 on top and bottom and
an accessory U-bracket shall be available. The grille logo shall be
rotatable for proper orientation with loudspeaker mounted horizontally
or vertically.
The external wiring connectors shall be screw-down terminals. Overall
cabinet dimensions shall be no greater than 520 mm high x 306 mm
wide x 277 mm deep (20.5 x 12.0 x 10.9 in) and shall weigh no more
than 12.2 kg (26.8 lb). The finish shall be lightly textured black or white.
The system shall be the JBL Model Control 29AV (or Control 29AV-
WH) with included InvisiBall® (mounting system).

The transformer in Control 29AV has been designed to minimize transformer saturation, however it is
recommended that when driving the transformer settings with very high signal levels, that the system be high-
passed to prevent excessive low frequency content from overloading the transformer and stressing the driving
amplifier. The high-pass frequency requirements vary according to the tap setting and how many speakers are
connected in parallel. The following chart assumes the goal of totally eliminating all saturation, even at full-voltage
(70V or 100V) peaks. You may be able to lower the high-pass frequency when operating at lower volumes. (High-
pass slope is 24 dB/oct)
High-Pass Recommendations for Control 29AV
High-Pass Frequency Recommendations
Vertical 1/3 Octave Polars
1 or 2 speakers 3 or more speakers
14 Watt Tap 30 Hz 35 ␣ Hz
28 Watt Tap 35 Hz 40 Hz
55 Watt Tap 60 Hz 70 Hz
110 Watt Tap 80 Hz 90 Hz
8 Ohm Setting No high-pass required
䉴Control®29AV High Output Indoor/Outdoor Monitor Speaker
JBL Professional
8500 Balboa Boulevard, P. O. Box 2200
Northridge, CA 91329 USA
A Harman International Company SSCONTROL 29AV
CRP 10M 2/01