JBL SUB550P User manual

Performance so powerful and perfect you feel as if you’re part of the movie you’re watching: The JBL®SUB550P
delivers the full impact and excitement of today’s blockbusters and resonates without unwanted distortion, thanks
to the built-in 300W RMS amplier. Producing the deep bass impact you expect from JBL products, the subwoofer
is also rened to render subtle musical melodies delicately and in full detail. Sublimely designed to complement
JBL Studio 5 series speakers, the innovative subwoofer provides full-size performance without an overwhelming
presence or footprint in the room. No matter what type of main or satellite speakers you use, the adjustable crossover
frequency equals installation exibility. With the JBL SUB550P, you’re set to enjoy the drama, excitement and realism
of today’s top entertainment.
250mm (10") subwoofer with built-in 300W RMS amplier
JBL®SUB550P
TECHNICAL SPECIFICATIONS
Low-frequency transducer: 250mm (10") PolyPlas™cone, cast frame
Amplier power: 300 watts RMS; 500 watts peak
Frequency response: 27Hz – 150Hz (–3dB)
Crossover frequency: 50Hz – 150Hz (variable), 24dB/octave
Enclosure type: Sealed
Power requirement: 220V – 230V, 50Hz/60Hz (EU)
Power consumption: <0.55W (230V) standby; 395W / 2.1A (230V) maximum
Dimensions (H x W x D): 444mm x 379mm x 380mm
Weight: 23kg
Available nishes: Black, cherry
Finishes:

HARMAN Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
©2011 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
PolyPlas is a trademark of HARMAN International Industries, Incorporated.
Features, specifications and appearance are subject to change without notice.
www.jbl.com
HIGHLIGHTS
250mm (10") low-frequency transducer
• Delivers deep bass impact and excitement to make you feel like part of the action
• Cast-aluminum frame maintains precise alignment for consistent performance in all
conditions and at all volume levels while dissipating heat for increased power and handling
• PolyPlas™cone material increases cone stiffness and damping for tighter, more extended
bass without breakup or distortion
Built-in 300W RMS amplier
• High-power amplification for louder volume with less distortion, achieving more realistic bass
while generating less heat than lower-powered amplifiers when operating at higher outputs
Complements JBL Studio 5 series speakers
• The distinctive, one-of-a-kind design provides full-size subwoofer performance without an
overwhelming presence
Key FeaTureS
• Sealed enclosure
• Forward-firing transducer provides maximum bass impact
• LFE and line-level inputs allow proper operation with a variety of receivers and processors
• Adjustable crossover frequency optimizes subwoofer performance
• Phase control increases installation flexibility
• Metal floor spikes improve bass impact and reduce unwanted “boominess” in the sound
• Auto turn-on and turn-off for more convenient use and to conserve energy
• Available in two finishes: black or cherry
JBL®SUB550P
250mm (10") subwoofer with built-in 300W RMS amplier