jcb 505-20 User manual
OPERATOR'S MANUAL
LOADALL (ROUGH TERRAIN VARIABLE REACH TRUCK)
505-20
EN - 9831/5117 ISSUE 1 - 03/2017
THIS MANUAL SHOULD ALWAYS STAY WITH THE MACHINE
OPERATOR'S
MANUAL
LOADALL (ROUGH TERRAIN
VARIABLE REACH TRUCK)
505-20
EN - 9831/5117 - ISSUE 1 - 03/2017
This manual contains original instructions, verified by
the manufacturer (or their authorized representative).
Copyright 2017 © JCB SERVICE
All rights reserved. No part of this publication may
be reproduced, stored in a retrieval system, or
transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise,
without prior permission from JCB SERVICE.
www.jcb.com
Foreword
The Operator's Manual
You and others can be killed or seriously injured
if you operate or maintain the machine without
first studying the Operator's Manual. You must
understand and follow the instructions in the
Operator's Manual. If you do not understand
anything, ask your employer or JCB dealer to
explain it.
Do not operate the machine without an Operator's
Manual, or if there is anything on the machine you
do not understand.
Treat the Operator's Manual as part of the machine.
Keep it clean and in good condition. Replace the
Operator's Manual immediately if it is lost, damaged
or becomes unreadable.
Machine Delivery and Installation
Even if you have operated this type of equipment
before, it is very important that your new machines
operations and functions are explained to you by
a JCB Dealer Representative following delivery of
your new machine.
Following the installation you will know how to gain
maximum productivity and performance from your
new product.
Please contact your local JCB dealer if the
Installation Form (included in this manual) has not
yet been completed with you.
Your local JCB Dealer is
Find manuals at https://best-manuals.com
Table of Contents
i 9831/5117-1 i
Contents Page No.
Acronyms Glossary ....................................................................................................................................... viii
Introduction
About this Manual
Model and Serial Number ..................................................................................................................... 1
Using the Manual .................................................................................................................................. 1
Left-Hand Side, Right-Hand Side ......................................................................................................... 1
Cab/Canopy .......................................................................................................................................... 1
Cross References ................................................................................................................................. 2
Safety
Safety - Yours and Others .................................................................................................................... 3
Safety Warnings .................................................................................................................................... 3
General Safety ...................................................................................................................................... 4
Clothing and Personal Protective Equipment (PPE) ............................................................................ 5
About the Product
Introduction
General .................................................................................................................................................. 7
Name and Address of the Manufacturer .............................................................................................. 7
Product Compliance .............................................................................................................................. 7
Description
General .................................................................................................................................................. 8
Intended Use ......................................................................................................................................... 8
Log Moving/Object Handling ................................................................................................................. 8
Optional Equipment and Attachments .................................................................................................. 8
Danger Zone ......................................................................................................................................... 8
Main Component Locations .................................................................................................................. 9
Product and Component Identification
Machine ............................................................................................................................................... 10
Engine ................................................................................................................................................. 11
Axle ..................................................................................................................................................... 11
Gearbox ............................................................................................................................................... 12
Operator Protective Structure ............................................................................................................. 13
Safety Labels
General ................................................................................................................................................ 15
Safety Label Identification ................................................................................................................... 16
Operator Station
Component Locations ......................................................................................................................... 18
Interior Switches
Ignition Switch ..................................................................................................................................... 20
Multi-Purpose Switch .......................................................................................................................... 20
Cab Interior Light ................................................................................................................................ 21
Console Switches
General ................................................................................................................................................ 23
Road Lights ......................................................................................................................................... 23
Rear Fog Lights .................................................................................................................................. 23
Hazard Warning Lights ....................................................................................................................... 23
Work Lights ......................................................................................................................................... 24
Boom Work Light ................................................................................................................................ 24
Information .......................................................................................................................................... 24
Find manuals at https://best-manuals.com
Table of Contents
ii 9831/5117-1 ii
Tilt Lock ............................................................................................................................................... 24
Smooth Ride System (SRS) ............................................................................................................... 24
Beacon ................................................................................................................................................ 24
Heater .................................................................................................................................................. 24
Air-Conditioning ................................................................................................................................... 25
Window Heater ................................................................................................................................... 25
Controls Isolation ................................................................................................................................ 25
Hydraulic Function .............................................................................................................................. 25
Hydraulic Mode ................................................................................................................................... 25
Hydraulic Venting ................................................................................................................................ 25
Hydraulic Tow Hitch ............................................................................................................................ 26
Reverse Fan ....................................................................................................................................... 26
Rear Window Wiper ............................................................................................................................ 26
Roof Window Wiper ............................................................................................................................ 26
Auxiliary Hydraulic Circuit ................................................................................................................... 26
Constant Flow ..................................................................................................................................... 27
Two Speed Range .............................................................................................................................. 27
Operation
Introduction
General ................................................................................................................................................ 29
Operating Safety
General ................................................................................................................................................ 30
Worksite Safety ................................................................................................................................... 32
Risk Assessment ................................................................................................................................ 33
Walk-Around Inspection
General ................................................................................................................................................ 35
Entering and Leaving the Operator Station
General ................................................................................................................................................ 36
Emergency Exit ................................................................................................................................... 36
Doors
Operator Door ..................................................................................................................................... 38
Windows
Rear Window ...................................................................................................................................... 40
Battery Isolator
General ................................................................................................................................................ 41
Before Starting the Engine
General ................................................................................................................................................ 42
Operator Seat
General ................................................................................................................................................ 43
Suspension Seat ................................................................................................................................. 43
Heated Seat Controls ......................................................................................................................... 45
Seat Belt
General ................................................................................................................................................ 46
Inertia Reel Seat Belt ......................................................................................................................... 46
Static Seat Belt ................................................................................................................................... 47
Starting the Engine
General ................................................................................................................................................ 49
Immobilizer .......................................................................................................................................... 51
Stopping and Parking
General ................................................................................................................................................ 55
Find manuals at https://best-manuals.com
Table of Contents
iii 9831/5117-1 iii
Preparing for Travel
General ................................................................................................................................................ 56
Preparing for Road Travel .................................................................................................................. 56
Preparing for Worksite Travel ............................................................................................................. 58
Smooth Ride System (SRS) ............................................................................................................... 58
Beacon ................................................................................................................................................ 59
Safety Equipment
Control Lock ........................................................................................................................................ 61
Drive Controls
Steering Wheel ................................................................................................................................... 62
Steering Column ................................................................................................................................. 62
Accelerator Pedal ................................................................................................................................ 62
Hand Throttle Control ......................................................................................................................... 62
Travel Speed Selector ........................................................................................................................ 63
Service Brake Pedal ........................................................................................................................... 64
Inching Pedal ...................................................................................................................................... 64
Park Brake .......................................................................................................................................... 65
Transmission Drive Lever ................................................................................................................... 66
Steer Mode Control ............................................................................................................................ 68
Instruments
Instrument Panel ................................................................................................................................. 69
Getting the Machine Moving
General ................................................................................................................................................ 85
Slopes
General ................................................................................................................................................ 87
Driving on Slopes ............................................................................................................................... 87
Working on Slopes ............................................................................................................................. 88
Driving the Machine
Steer Modes ........................................................................................................................................ 90
Operating Levers/Pedals
General ................................................................................................................................................ 92
Control Layouts ................................................................................................................................... 92
Boom Controls .................................................................................................................................... 92
Chassis Leveling Controls .................................................................................................................. 93
Auxiliary Circuit Controls ..................................................................................................................... 93
Lifting and Loading
General ................................................................................................................................................ 97
Load Charts ........................................................................................................................................ 97
Boom Indicators ................................................................................................................................ 100
Inclinometers ..................................................................................................................................... 100
Working with the Boom
General .............................................................................................................................................. 102
Fork Ratings ...................................................................................................................................... 103
Repositioning the Forks .................................................................................................................... 103
Working with Pallets ......................................................................................................................... 104
Working with Bales ........................................................................................................................... 106
Working with Irregular Loads ............................................................................................................ 107
Stacking Loads ................................................................................................................................. 108
Filling the Shovel .............................................................................................................................. 109
Loading a Truck ................................................................................................................................ 110
Find manuals at https://best-manuals.com
Table of Contents
iv 9831/5117-1 iv
Heating, Ventilating and Air-Conditioning (HVAC)
General .............................................................................................................................................. 111
Air-Conditioning Controls .................................................................................................................. 111
Face Level Fan ................................................................................................................................. 112
Fire Extinguisher
General .............................................................................................................................................. 113
Moving a Disabled Machine
General .............................................................................................................................................. 114
Jump-Starting the Engine ................................................................................................................. 114
Retrieval ............................................................................................................................................ 115
Transporting the Machine
General .............................................................................................................................................. 119
Loading the Machine onto the Transporting Vehicle/Trailer ............................................................. 119
Operating Environment
General .............................................................................................................................................. 121
Operating in Low Temperatures ....................................................................................................... 121
Operating in High Temperatures ....................................................................................................... 121
Cab Filters ......................................................................................................................................... 122
Refueling
General .............................................................................................................................................. 123
Low Fuel Levels ................................................................................................................................ 123
Filling the Tank .................................................................................................................................. 123
Attachments
Working with Attachments
Introduction ........................................................................................................................................ 125
Attachments for your Machine .......................................................................................................... 125
Connecting/Disconnecting Hydraulic Hoses ..................................................................................... 126
Tool Carrier
General .............................................................................................................................................. 130
Quick-fit Carriage
General .............................................................................................................................................. 151
Tow Hitches
General .............................................................................................................................................. 156
Ladder Hitch ...................................................................................................................................... 159
Hydraulic Tow Hitch .......................................................................................................................... 163
Mechanical Tow Hitch ....................................................................................................................... 165
Jibs
General .............................................................................................................................................. 168
Extension Jib ..................................................................................................................................... 168
Roof Truss Jib ................................................................................................................................... 169
Hooks
Fork-Mounted Hook .......................................................................................................................... 172
Work Platforms
General .............................................................................................................................................. 173
Preservation and Storage
Cleaning
General .............................................................................................................................................. 175
Preparation ........................................................................................................................................ 175
Checking For Damage
General .............................................................................................................................................. 177
Find manuals at https://best-manuals.com
Table of Contents
v 9831/5117-1 v
Storage
General .............................................................................................................................................. 178
Put into Storage ................................................................................................................................ 178
During Storage .................................................................................................................................. 178
Take out of Storage .......................................................................................................................... 179
Security
General .............................................................................................................................................. 180
JCB Plantguard ................................................................................................................................. 180
Construction Equipment Security and Registration Scheme (CESAR) ............................................ 180
LiveLink ............................................................................................................................................. 180
Maintenance
Introduction
General .............................................................................................................................................. 181
Owner/Operator Support ................................................................................................................... 181
Service/Maintenance Agreements .................................................................................................... 182
Initial Service and Inspection ............................................................................................................ 182
Obtaining Spare Parts ...................................................................................................................... 182
Maintenance Safety
General .............................................................................................................................................. 183
Fluids and Lubricants ....................................................................................................................... 184
Maintenance Schedules
General .............................................................................................................................................. 188
How to Use the Maintenance Schedules ......................................................................................... 188
Maintenance Intervals ....................................................................................................................... 188
Pre-start Cold Checks, Service Points and Fluid Levels .................................................................. 189
Functional Tests and Final Inspection .............................................................................................. 191
Maintenance Positions
General .............................................................................................................................................. 193
Maintenance Position - Boom Lowered ............................................................................................ 193
Maintenance Position - Boom Raised .............................................................................................. 193
Service Points
General .............................................................................................................................................. 196
Access Apertures
General .............................................................................................................................................. 200
Engine Compartment Cover ............................................................................................................. 200
Undershield ....................................................................................................................................... 200
Tools
General .............................................................................................................................................. 202
Lubrication
General .............................................................................................................................................. 203
Preparation ........................................................................................................................................ 203
Attachments
General ............................................................................................................................................. 204
Body and Framework
General ............................................................................................................................................. 205
Boom
General ............................................................................................................................................. 206
Operator Station
General ............................................................................................................................................. 207
Operator Protective Structure ........................................................................................................... 207
Seat ................................................................................................................................................... 207
Find manuals at https://best-manuals.com
Table of Contents
vi 9831/5117-1 vi
Seat Belt ........................................................................................................................................... 207
Controls ............................................................................................................................................. 208
Engine
General ............................................................................................................................................. 209
Oil ...................................................................................................................................................... 209
Drive Belt .......................................................................................................................................... 211
Air Filter
General ............................................................................................................................................. 212
Outer Element .................................................................................................................................. 212
Dust Valve ........................................................................................................................................ 213
Fuel System
General ............................................................................................................................................. 214
Tank .................................................................................................................................................. 215
Fuel Filter .......................................................................................................................................... 215
Engine Fuel Filter ............................................................................................................................. 216
Water Separator ............................................................................................................................... 217
Cooling System
General ............................................................................................................................................. 218
Coolant .............................................................................................................................................. 218
Cooling Pack .................................................................................................................................... 218
Brakes
Park Brake ........................................................................................................................................ 220
Service Brake ................................................................................................................................... 220
Gearbox
Oil ...................................................................................................................................................... 221
Axles
General ............................................................................................................................................. 222
Oil ...................................................................................................................................................... 222
Wheels
General ............................................................................................................................................. 223
Tires
General ............................................................................................................................................. 225
Hydraulic System
General ............................................................................................................................................. 227
Services ............................................................................................................................................ 228
Oil ...................................................................................................................................................... 228
Cylinders / Rams .............................................................................................................................. 228
Hose Burst Check Valves ................................................................................................................. 228
Electrical System
General ............................................................................................................................................. 230
Battery ............................................................................................................................................... 231
Battery Isolator ................................................................................................................................. 232
Fuses ................................................................................................................................................ 232
Relays ............................................................................................................................................... 233
Window Washer ................................................................................................................................ 234
Miscellaneous
Fire Extinguisher ............................................................................................................................... 235
Technical Data
Static Dimensions
Dimensions ........................................................................................................................................ 237
Weights ............................................................................................................................................. 238
Find manuals at https://best-manuals.com
Table of Contents
vii 9831/5117-1 vii
Performance Dimensions
General .............................................................................................................................................. 239
Boom Dimensions and Performance ................................................................................................ 239
Towing Weights ................................................................................................................................. 239
Noise Emissions
General .............................................................................................................................................. 241
Noise Data ........................................................................................................................................ 241
Vibration Emissions
Vibration Data ................................................................................................................................... 242
Fluids, Lubricants and Capacities
General .............................................................................................................................................. 243
Fuel ................................................................................................................................................... 244
Coolant .............................................................................................................................................. 247
Torque Values
General .............................................................................................................................................. 249
Electrical System
General .............................................................................................................................................. 250
Bulbs ................................................................................................................................................. 250
Fuses ................................................................................................................................................. 250
Relays ............................................................................................................................................... 252
Batteries ............................................................................................................................................ 253
Engine
Engine Emissions ............................................................................................................................. 254
Wheels and Tires
General .............................................................................................................................................. 255
Tire Sizes and Pressures ................................................................................................................. 256
Warranty Information
Service Record Sheet ....................................................................................................................... 258
Engine Emissions ............................................................................................................................. 264
Find manuals at https://best-manuals.com
Table of Contents
viii 9831/5117-1 viii
Acronyms Glossary
ARV Auxiliary Relief Valve
CESAR Construction Equipment Security and Registration
DEF Diesel Exhaust Fluid
ECU Electronic Control Unit
FEAD Front End Accessory Drive
FOPS Falling Object Protective Structure
HVAC Heating Ventilation Air Conditioning
ISO International Organization for Standardization
LCD Liquid Crystal Display
LED Light Emitting Diode
LLMC Longitudinal Load Moment Control
LLMI Longitudinal Load Moment Indicator
LMI Load Moment Indicator
MRV Main Relief Valve
PIN Product Identification Number
PPE Personal Protective Equipment
ROPS Roll-Over Protective Structure
RPM Revolutions Per Minute
SAE Society of Automotive Engineers
SRS Smooth Ride System
SWL Safe Working Load
Introduction
About this Manual
1 9831/5117-1 1
Introduction
About this Manual
Model and Serial Number
This manual provides information for the following model(s) in the JCB machine range:
Model From: To:
505-20 2457001 2460000
Using the Manual
This operator's manual is arranged to give you a good understanding of the machine and its safe operation.
It also contains maintenance and technical data.
Read this manual from the front to the back before you use the machine for the first time, even if you have used
machines of a similar/same type before as the technical specification, systems and controls of the machine
may have changed. Particular attention must be given to all the safety aspects of operating and maintaining
the machine.
If there is anything you are not sure about, ask your JCB dealer or employer. Do not guess, you or others could
be killed or seriously injured.
The general and specific warnings in this section are repeated throughout the manual. Read all the safety
statements regularly, so you do not forget them. Remember that the best operators are the safest operators.
The illustrations in this manual are for guidance only. Where the machines are different, the text and or the
illustration will specify.
The manufacturer's policy is one of continuous improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will be accepted for discrepancies which may occur
between specifications of the machine and the descriptions contained in this manual.
All of the optional equipment included in this manual may not be available in all territories
Left-Hand Side, Right-Hand Side
In this manual, 'left' and 'right' mean your left and right when you are seated correctly in the machine.
Figure 1.
A
B
ALeft BRight
Cab/Canopy
This manual frequently makes references to the cab. For example, 'do not operate the machine without an
operator's manual in the cab'. These statements also apply to canopy build machines.
Introduction
About this Manual
2 9831/5117-1 2
Cross References
In this manual, cross references are made by presenting the subject title in blue (electronic copy only). The
number of the page upon which the subject begins is indicated within the brackets. For example: Refer to:
Cross References (Page 2).
Introduction
Safety
3 9831/5117-1 3
Safety
Safety - Yours and Others
All machinery can be hazardous. When a machine is correctly operated and maintained, it is a safe machine
to work with. When it is carelessly operated or poorly maintained it can become a danger to you (the operator)
and others.
In this manual and on the machine you will find warning messages. Read and understand them. They inform
you of potential hazards and how to avoid them. If you do not fully understand the warning messages, ask your
employer or JCB dealer to explain them.
Safety is not just a matter of responding to the warnings. All the time you are working on or with the machine
you must be thinking of what hazards there might be and how to avoid them.
Do not work with the machine until you are sure that you can control it.
Do not start any work until you are sure that you and those around you will be safe.
If you are not sure of anything, about the machine or the work, ask someone who knows. Do not assume
anything.
Remember:
• Be careful
• Be alert
• Be safe.
Safety Warnings
In this manual and on the machine, there are safety notices. Each notice starts with a signal word. The signal
word meanings are given below.
The signal word 'DANGER' indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
The signal word 'WARNING' indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
The signal word 'CAUTION' indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
The signal word 'Notice' indicates a hazardous situation which, if not avoided, could result in machine damage.
The safety alert system (shown) also helps to identify important safety messages in this manual and on the
machine. When you see this symbol, be alert, your safety is involved. Carefully read the message that follows,
and inform other operators.
Figure 2. The safety alert system
Introduction
Safety
4 9831/5117-1 4
General Safety
Training
To operate the machine safely you must know the machine and have the skill to use it. You must abide by
all relevant laws, health and safety regulations that apply to the country you are operating in. The operator's
manual instructs you on the machine, its controls and its safe operation; it is not a training manual. If you are a
new operator, get yourself trained in the skills of using a machine before trying to work with it. If you don't, you
will not do your job well, and you will be a danger to yourself and others. In some markets and for work on certain
jobsites you may be required to have been trained and assessed in accordance with an operator competence
scheme. Make sure that you and your machine comply with relevant local laws and jobsite requirements - it
is your responsibility.
Care and Alertness
All the time you are working with or on the machine, take care and stay alert. Always be careful. Always be
alert for hazards.
Clothing
You can be injured if you do not wear the correct clothing. Loose clothing can get caught in the machinery.
Keep cuffs fastened. Do not wear a necktie or scarf. Keep long hair restrained. Remove rings, watches and
personal jewelry.
Alcohol and Drugs
It is extremely dangerous to operate machinery when under the influence of alcohol or drugs. Do not consume
alcoholic drinks or take drugs before or while operating the machine or attachments. Be aware of medicines
which can cause drowsiness.
Feeling Unwell
Do not attempt to operate the machine if you are feeling unwell. By doing so you could be a danger to yourself
and those you work with.
Cell Phones
Switch off your cell phone before entering an area with a potentially explosive atmosphere. Sparks in such an
area could cause an explosion or fire resulting in death or serious injury.
Switch off and do not use your cell phone when refueling the machine.
Lifting Equipment
You can be injured if you use incorrect or faulty lifting equipment. You must identify the weight of the item to
be lifted then choose lifting equipment that is strong enough and suitable for the job. Make sure that lifting
equipment is in good condition and complies with all local regulations.
Raised Equipment
Never walk or work under raised equipment unless it is supported by a mechanical device. Equipment which
is supported only by a hydraulic device can drop and injure you if the hydraulic system fails or if the control
is operated (even with the engine stopped).
Make sure that no-one goes near the machine while you install or remove the mechanical device.
Raised Machine
Never position yourself or any part of your body under a raised machine which is not correctly supported. If the
machine moves unexpectedly you could become trapped and suffer serious injury or be killed.
Lightning
Lightning can kill you. Do not use the machine if there is lightning in your area.
Machine Modifications
This machine is manufactured in compliance with prevailing legislative requirements. It must not be altered in
any way which could affect or invalidate its compliance. For advice consult your JCB dealer.
Introduction
Safety
5 9831/5117-1 5
Clothing and Personal Protective Equipment (PPE)
Do not wear loose clothing or jewellery that can get caught on controls or moving parts. Wear protective clothing
and personal safety equipment issued or called for by the job conditions, local regulations or as specified by
your employer.
Notes:
6 9831/5117-1 6
About the Product
Introduction
7 9831/5117-1 7
About the Product
Introduction
General
Before you start using the machine, you must know how the machine operates. Use this part of the manual
to identify each control lever, switch, gage, button and pedal. Do not guess. If there is anything you do not
understand, ask your JCB dealer.
Name and Address of the Manufacturer
JCB Excavators Limited, Lakeside Works, Rocester, Uttoxeter, United Kingdom, ST145JP
Product Compliance
Your JCB product was designed to comply with the laws and regulations applicable at the time of its manufacture
for the market in which it was first sold. In many markets, laws and regulations exist that require the owner to
maintain the product at a level of compliance relevant to the product when first produced. Even in the absence
of defined requirements for the product owner, JCB recommend that the product compliance be maintained
to ensure safety of the operator and exposed persons and to ensure the correct environmental performance.
Your product must not be altered in any way which could affect or invalidate any of these requirements. For
advice consult your JCB dealer.
For its compliance as a new product, your JCB and some of its components may bear approval numbers
and markings, and may have been supplied with a Declaration/Certificate of Conformity. These markings and
documents are relevant only for the country/region in which the product was first sold to the extent that the
laws and regulations required them.
Re-sales and import/export of products across territories with different laws and regulations can cause new
requirements to become relevant for which the product was not originally designed or specified. In some cases,
pre owned products irrespective of their age are considered new for the purposes of compliance and may be
required to meet the latest requirements which could present an insurmountable barrier to their sale/use.
Despite the presence of any compliance related markings on the product and components, you should not
assume that compliance in a new market will be possible. In many cases it is the person responsible for import
of a pre owned product into a market that becomes responsible for compliance and who is also considered
the manufacturer.
JCB may be unable to support any product compliance related enquiry for a product which has been moved out
of the legislative country/region where it was first sold, and in particular where a product specification change
or additional certification would have been required in order for the product to be in compliance.
About the Product
Description
8 9831/5117-1 8
Description
General
The JCB Loadall is a self propelled, seated operator, wheeled machine for operation on unimproved natural
terrain and disturbed terrain.
A main structural support is designed to carry an extending boom with a carriage mounted on the front to which
forks or an approved attachment can be fitted.
When used normally the machine lifts and places loads by extending/retracting, raising/lowering the boom.
Intended Use
The machine is intended to be used in normal conditions for the applications described in this manual. If the
machine is used for other applications or in dangerous environments, for example in a flammable atmosphere
or in areas with dust containing asbestos, special safety regulations must be obeyed and the machine must
be equipped for use in these environments.
Log Moving/Object Handling
Do not use the machine to move or handle logs unless sufficient log protection is installed. You could cause
serious injury to yourself and damage to the machine. For more information, contact your JCB dealer.
Optional Equipment and Attachments
A wide range of optional attachments are available to increase the versatility of your machine. Only the JCB
approved attachments are recommended for use with your machine. Contact your JCB dealer for the full list
of approved attachments available.
Danger Zone
The danger zone is any zone within and/or around the machinery in which a person is subject to a risk to their
health or safety. The danger zone includes the area in immediate proximity to any hazardous moving parts,
areas into which working equipment and attachments can be moved to quickly, the machine normal stopping
distances and also areas into which the machine can quickly turn under normal conditions of use. Depending
on the application at the time, the danger zone could also include the area into which debris, from use of an
attachment or working tool, could be projected and any area into which debris could fall from the machine.
During the operation of the machine, keep all persons out of the danger zone. Persons in the danger zone
could be injured.
Before you do a maintenance task, make the product safe.
About the Product
Description
9 9831/5117-1 9
Main Component Locations
Figure 3.
B
A
C
E
F
D
AHydraulic tow hitch (option) BMechanical tow hitch (option)
CBoom DROPS (Roll-Over Protective Structure)/FOPS
(Falling Object Protective Structure) cab
EDoor FCarriage
Table of contents
Other jcb Truck manuals
