jcb 526-56 User manual

OPERATOR'S MANUAL
LOADALL (ROUGH TERRAIN VARIABLE REACH TRUCK)
526-56, 531-70, 535-95, 536-60, 536-70,
536-70LP, 541-70, 550-80, 560-80
EN - 9831/0100 ISSUE 6 - 09/2018
THIS MANUAL SHOULD ALWAYS STAY WITH THE MACHINE

OPERATOR'S
MANUAL
LOADALL (ROUGH TERRAIN
VARIABLE REACH TRUCK)
526-56, 531-70, 535-95, 536-60, 536-70,
536-70LP, 541-70, 550-80, 560-80
EN - 9831/0100 - ISSUE 6 - 09/2018
This manual contains original instructions, verified by
the manufacturer (or their authorized representative).
Copyright 2018 © JCB SERVICE
All rights reserved. No part of this publication may
be reproduced, stored in a retrieval system, or
transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise,
without prior permission from JCB SERVICE.
www.jcb.com
Foreword
The Operator's Manual
You and others can be killed or seriously injured
if you operate or maintain the machine without
first studying the Operator's Manual. You must
understand and follow the instructions in the
Operator's Manual. If you do not understand
anything, ask your employer or JCB dealer to
explain it.
Do not operate the machine without an Operator's
Manual, or if there is anything on the machine you
do not understand.
Treat the Operator's Manual as part of the machine.
Keep it clean and in good condition. Replace the
Operator's Manual immediately if it is lost, damaged
or becomes unreadable.
California Proposition 65
WARNING Diesel engine exhaust and some
of its constituents are known to the Sate of
California to cause cancer, birth defects, an other
reproductive harm.
Machine Delivery and Installation
Even if you have operated this type of equipment
before, it is very important that your new machines
operations and functions are explained to you by
a JCB Dealer Representative following delivery of
your new machine.
Following the installation you will know how to gain
maximum productivity and performance from your
new product.
Please contact your local JCB dealer if the
Installation Form (included in this manual) has not
yet been completed with you.
Your local JCB Dealer is
Find manuals at https://best-manuals.com

9831/0100-6
Notes:
Find manuals at https://best-manuals.com

Table of Contents
i 9831/0100-6 i
Contents Page No.
Acronyms Glossary ........................................................................................................................................ ix
Introduction
About this Manual
Model and Serial Number ..................................................................................................................... 1
Using the Manual .................................................................................................................................. 1
Left-Hand Side, Right-Hand Side ......................................................................................................... 2
Cab/Canopy .......................................................................................................................................... 2
Cross References ................................................................................................................................. 2
Safety
Safety - Yours and Others .................................................................................................................... 3
Safety Warnings .................................................................................................................................... 3
General Safety ...................................................................................................................................... 4
Clothing and Personal Protective Equipment (PPE) ............................................................................ 5
About the Product
Introduction
General .................................................................................................................................................. 7
Name and Address of the Manufacturer .............................................................................................. 7
Product Compliance .............................................................................................................................. 7
Description
General .................................................................................................................................................. 8
Intended Use ......................................................................................................................................... 8
Log Moving/Object Handling ................................................................................................................. 8
Optional Equipment and Attachments .................................................................................................. 8
Danger Zone ......................................................................................................................................... 8
Main Component Locations .................................................................................................................. 9
Product and Component Identification
Machine ............................................................................................................................................... 10
Engine ................................................................................................................................................. 13
Axle(s) ................................................................................................................................................. 15
Gearbox ............................................................................................................................................... 16
Operator Protective Structure ............................................................................................................. 18
Safety Labels
General ................................................................................................................................................ 21
Safety Label Identification ................................................................................................................... 21
Operator Station
Component Locations ......................................................................................................................... 23
Interior Switches
Ignition Switch ..................................................................................................................................... 26
Multi-Purpose Switch .......................................................................................................................... 26
Cab Interior Light ................................................................................................................................ 27
Console Switches
General ................................................................................................................................................ 29
Road Lights ......................................................................................................................................... 29
Rear Fog Lights .................................................................................................................................. 29
Hazard Warning Lights ....................................................................................................................... 29
Work Lights ......................................................................................................................................... 30
Transmission Mode ............................................................................................................................. 30
Transmission Disconnect .................................................................................................................... 30
Find manuals at https://best-manuals.com

Table of Contents
ii 9831/0100-6 ii
Information .......................................................................................................................................... 30
Tilt Lock ............................................................................................................................................... 30
Smooth Ride System (SRS) ............................................................................................................... 31
Automatic Smooth Ride System ......................................................................................................... 31
Beacon ................................................................................................................................................ 31
Heater .................................................................................................................................................. 31
Air-Conditioning ................................................................................................................................... 31
Window Heater ................................................................................................................................... 31
Inner Boom Extend/Retract ................................................................................................................ 32
Controls Isolation ................................................................................................................................ 32
Stabiliser Isolation ............................................................................................................................... 32
Chassis Levelling ................................................................................................................................ 32
Hydraulic Function .............................................................................................................................. 33
Hydraulic Mode ................................................................................................................................... 33
Hydraulic Venting ................................................................................................................................ 33
Hydraulic Tow Hitch ............................................................................................................................ 33
Reverse Fan ....................................................................................................................................... 34
Rear Window Wiper ............................................................................................................................ 34
Roof Window Wiper ............................................................................................................................ 34
Auxiliary Hydraulic Circuit ................................................................................................................... 34
ECO/Power ......................................................................................................................................... 35
Auto 2WD ............................................................................................................................................ 35
Operation
Introduction
General ................................................................................................................................................ 37
Operating Safety
General ................................................................................................................................................ 38
Worksite Safety ................................................................................................................................... 40
Risk Assessment ................................................................................................................................ 41
Walk-Around Inspection
General ................................................................................................................................................ 43
Entering and Leaving the Operator Station
General ................................................................................................................................................ 44
Emergency Exit ................................................................................................................................... 44
Doors
Operator Door ..................................................................................................................................... 47
Windows
Rear Window ...................................................................................................................................... 51
Battery Isolator
General ................................................................................................................................................ 53
Before Starting the Engine
General ................................................................................................................................................ 54
Operator Seat
General ................................................................................................................................................ 55
Basic Seat ........................................................................................................................................... 55
Suspension Seat ................................................................................................................................. 56
Heated Seat Controls ......................................................................................................................... 59
Seat Belt
General ................................................................................................................................................ 60
Inertia Reel Seat Belt ......................................................................................................................... 60
Find manuals at https://best-manuals.com

Table of Contents
iii 9831/0100-6 iii
Static Seat Belt ................................................................................................................................... 61
Mirrors
General ................................................................................................................................................ 63
Starting the Engine
General ................................................................................................................................................ 64
Immobiliser .......................................................................................................................................... 67
Stopping and Parking
General ................................................................................................................................................ 71
Preparing for Travel
General ................................................................................................................................................ 72
Preparing for Road Travel .................................................................................................................. 72
Preparing for Worksite Travel ............................................................................................................. 75
Smooth Ride System (SRS) ............................................................................................................... 78
Beacon ................................................................................................................................................ 80
Safety Equipment
Control Lock ........................................................................................................................................ 82
Drive Controls
Steering Wheel ................................................................................................................................... 85
Steering Column ................................................................................................................................. 85
Accelerator Pedal ................................................................................................................................ 85
Service Brake Pedal ........................................................................................................................... 85
Inching Pedal ...................................................................................................................................... 86
Park Brake .......................................................................................................................................... 86
Transmission Drive Lever ................................................................................................................... 86
Gear Lever .......................................................................................................................................... 90
Transmission Dump Switch ................................................................................................................ 96
Steer Mode Control ............................................................................................................................ 97
Transmission Mode ............................................................................................................................. 97
Instruments
Instrument Panel ................................................................................................................................. 98
Getting the Machine Moving
General .............................................................................................................................................. 120
Slopes
General .............................................................................................................................................. 123
Driving on Slopes ............................................................................................................................. 123
Working on Slopes ........................................................................................................................... 124
Driving the Machine
Steer Modes ...................................................................................................................................... 126
Limited Slip Differential (LSD) .......................................................................................................... 127
TorqueLock ........................................................................................................................................ 127
Towing Other Equipment .................................................................................................................. 128
Operating Levers/Pedals
General .............................................................................................................................................. 151
Control Layouts ................................................................................................................................. 152
Boom Controls .................................................................................................................................. 152
Chassis Levelling Controls ............................................................................................................... 156
Auxiliary Circuit Controls ................................................................................................................... 159
Lifting and Loading
General .............................................................................................................................................. 166
Load Charts ...................................................................................................................................... 166
Boom Indicators ................................................................................................................................ 169
Find manuals at https://best-manuals.com

Table of Contents
iv 9831/0100-6 iv
Inclinometers ..................................................................................................................................... 169
Interlocks ........................................................................................................................................... 170
Longitudinal Load Moment Indicator (LLMI) ..................................................................................... 170
Longitudinal Load Moment Control (LLMC) ..................................................................................... 174
Working with the Boom
General .............................................................................................................................................. 179
Fork Ratings ...................................................................................................................................... 180
Repositioning the Forks .................................................................................................................... 180
Working with Pallets ......................................................................................................................... 181
Working with Bales ........................................................................................................................... 183
Working with Irregular Loads ............................................................................................................ 184
Stacking Loads ................................................................................................................................. 185
Filling the Shovel .............................................................................................................................. 186
Loading a Truck ................................................................................................................................ 188
Adjusting the Boom .......................................................................................................................... 189
Heating, Ventilating and Air-Conditioning (HVAC)
General .............................................................................................................................................. 190
Air-Conditioning Controls .................................................................................................................. 190
Face Level Fan ................................................................................................................................. 191
Fire Extinguisher
General .............................................................................................................................................. 192
Moving a Disabled Machine
Jump-Starting the Engine ................................................................................................................. 193
Recovery Hitch .................................................................................................................................. 194
Lifting the Machine
General .............................................................................................................................................. 197
Transporting the Machine
General .............................................................................................................................................. 201
Loading the Machine onto the Transporting Vehicle/Trailer ............................................................. 201
Operating Environment
General .............................................................................................................................................. 207
Operating in Low Temperatures ....................................................................................................... 207
Operating in High Temperatures ....................................................................................................... 208
Refuelling
General .............................................................................................................................................. 209
Low Fuel Levels ................................................................................................................................ 209
Filling the Tank .................................................................................................................................. 209
Attachments
Working with Attachments
Introduction ........................................................................................................................................ 213
Attachments for your Machine .......................................................................................................... 213
Connecting/Disconnecting Hydraulic Hoses ..................................................................................... 214
Tool Carrier
General .............................................................................................................................................. 222
Quick-fit Carriage
General .............................................................................................................................................. 227
Tow Hitches
General .............................................................................................................................................. 231
Ladder Hitch ...................................................................................................................................... 234
Hydraulic Tow Hitch .......................................................................................................................... 238
Find manuals at https://best-manuals.com

Table of Contents
v 9831/0100-6 v
Mechanical Tow Hitch ....................................................................................................................... 240
Side-Shift Carriage
General .............................................................................................................................................. 243
Jibs
General .............................................................................................................................................. 248
Extension Jib ..................................................................................................................................... 248
Roof Truss Jib ................................................................................................................................... 249
Hooks
Fork-Mounted Hook .......................................................................................................................... 252
Work Platforms
General .............................................................................................................................................. 254
Preservation and Storage
Cleaning
General .............................................................................................................................................. 255
Preparation ........................................................................................................................................ 256
Checking For Damage
General .............................................................................................................................................. 257
Storage
General .............................................................................................................................................. 258
Put into Storage ................................................................................................................................ 259
During Storage .................................................................................................................................. 259
Take out of Storage .......................................................................................................................... 260
Security
General .............................................................................................................................................. 261
JCB Plantguard ................................................................................................................................. 261
Construction Equipment Security and Registration Scheme (CESAR) ............................................ 261
LiveLink ............................................................................................................................................. 261
Maintenance
Introduction
General .............................................................................................................................................. 263
Owner/Operator Support ................................................................................................................... 263
Service/Maintenance Agreements .................................................................................................... 264
Initial Service and Inspection ............................................................................................................ 264
Obtaining Spare Parts ...................................................................................................................... 264
Maintenance Safety
General .............................................................................................................................................. 265
Fluids and Lubricants ....................................................................................................................... 266
Maintenance Schedules
General .............................................................................................................................................. 270
How to Use the Maintenance Schedules ......................................................................................... 270
Maintenance Intervals ....................................................................................................................... 270
Pre-start Cold Checks, Service Points and Fluid Levels .................................................................. 271
Functional Tests and Final Inspection .............................................................................................. 274
Maintenance Positions
General .............................................................................................................................................. 277
Maintenance Position - Boom Lowered ............................................................................................ 277
Maintenance Position - Boom Raised .............................................................................................. 278
Service Points
General .............................................................................................................................................. 281
Find manuals at https://best-manuals.com

Table of Contents
vi 9831/0100-6 vi
Access Apertures
General .............................................................................................................................................. 312
Battery Cover .................................................................................................................................... 312
Engine Compartment Cover ............................................................................................................. 313
Rear Cover ........................................................................................................................................ 314
Undershield ....................................................................................................................................... 315
Tools
General .............................................................................................................................................. 317
Toolbox .............................................................................................................................................. 317
Lubrication
General .............................................................................................................................................. 318
Preparation ........................................................................................................................................ 318
Attachments
General ............................................................................................................................................. 319
Body and Framework
General ............................................................................................................................................. 320
Pivot Pins .......................................................................................................................................... 320
Boom
General ............................................................................................................................................. 322
Operator Station
General ............................................................................................................................................. 327
Operator Protective Structure ........................................................................................................... 327
Seat ................................................................................................................................................... 327
Seat Belt ........................................................................................................................................... 327
Controls ............................................................................................................................................. 328
Engine
General ............................................................................................................................................. 329
Oil ...................................................................................................................................................... 330
Drive Belt .......................................................................................................................................... 334
Emissions Control System ............................................................................................................... 334
Air Filter
General ............................................................................................................................................. 338
Outer Element .................................................................................................................................. 338
Dust Valve ........................................................................................................................................ 339
Fuel System
General ............................................................................................................................................. 340
Tank .................................................................................................................................................. 341
Fuel Filter .......................................................................................................................................... 342
Lubricity Filter ................................................................................................................................... 343
Water Separator ............................................................................................................................... 344
Cooling System
General ............................................................................................................................................. 347
Coolant .............................................................................................................................................. 347
Cooling Pack .................................................................................................................................... 347
Brakes
General ............................................................................................................................................. 349
Park Brake ........................................................................................................................................ 351
Service Brake ................................................................................................................................... 352
Gearbox
Oil ...................................................................................................................................................... 353
Find manuals at https://best-manuals.com

Table of Contents
vii 9831/0100-6 vii
Axles
General ............................................................................................................................................. 354
Oil ...................................................................................................................................................... 354
Wheels
General ............................................................................................................................................. 356
Tyres
General ............................................................................................................................................. 358
Propshafts
General ............................................................................................................................................. 360
Hydraulic System
General ............................................................................................................................................. 361
Services ............................................................................................................................................ 362
Oil ...................................................................................................................................................... 362
Cylinders / Rams .............................................................................................................................. 363
Hose Burst Check Valves ................................................................................................................. 363
Electrical System
General ............................................................................................................................................. 364
Battery ............................................................................................................................................... 365
Battery Isolator ................................................................................................................................. 366
Fuses ................................................................................................................................................ 366
Relays ............................................................................................................................................... 369
Window Washer ................................................................................................................................ 371
Miscellaneous
Fire Extinguisher ............................................................................................................................... 375
Technical Data
Static Dimensions
Dimensions ........................................................................................................................................ 377
Weights ............................................................................................................................................. 389
Visibility Diagrams ............................................................................................................................. 393
Performance Dimensions
General .............................................................................................................................................. 414
Boom Dimensions and Performance ................................................................................................ 415
Towing Weights ................................................................................................................................. 423
Noise Emissions
General .............................................................................................................................................. 425
Noise Data ........................................................................................................................................ 425
Vibration Emissions
General .............................................................................................................................................. 426
Vibration Data ................................................................................................................................... 427
Fluids, Lubricants and Capacities
General .............................................................................................................................................. 432
Fuel ................................................................................................................................................... 434
Diesel Exhaust Fluid (DEF) .............................................................................................................. 441
Coolant .............................................................................................................................................. 443
Torque Values
General .............................................................................................................................................. 444
Electrical System
General .............................................................................................................................................. 445
Fuses ................................................................................................................................................. 446
Relays ............................................................................................................................................... 457
Find manuals at https://best-manuals.com

Table of Contents
viii 9831/0100-6 viii
Engine
Exhaust After Treatment (EAT) ......................................................................................................... 464
Wheels and Tyres
General .............................................................................................................................................. 468
Tyre Sizes and Pressures ................................................................................................................ 469
Declaration of Conformity
General .............................................................................................................................................. 497
Data ................................................................................................................................................... 497
Warranty Information
Service Record Sheet ....................................................................................................................... 499

Table of Contents
ix 9831/0100-6 ix
Acronyms Glossary
2WD Two Wheel Drive
CAN Controller Area Network
CESAR Construction Equipment Security and Registration
DEF Diesel Exhaust Fluid
DTVT Dual Technology Variable Transmission
ECU Electronic Control Unit
FEAD Front End Accessory Drive
FOPS Falling Object Protective Structure
HVAC Heating Ventilation Air Conditioning
ISO International Organization for Standardization
LCD Liquid Crystal Display
LED Light Emitting Diode
LLMC Longitudinal Load Moment Control
LLMI Longitudinal Load Moment Indicator
LMI Load Moment Indicator
LSD Limited Slip Differential
OECD Organization for Economic Cooperation and Development
PIN Product Identification Number
RMS Root Mean Square
ROPS Roll-Over Protective Structure
RPM Revolutions Per Minute
SCR Selective Catalytic Reduction
SRS Smooth Ride System
SWL Safe Working Load

Notes:
x 9831/0100-6 x

Introduction
About this Manual
1 9831/0100-6 1
Introduction
About this Manual
Model and Serial Number
This manual provides information for the following model(s) in the JCB machine range:
Model From: To:
2460601 2473000
2565203 2575200
526-56
2902000
2460601 2473000
2565203 2575200
531-70
2902000
2460601 2473000
2565203 2575200
535-95
2902000
2460601 2473000
2565203 2575200
536-60
2902000
2460601 2473000
2565203 2575200
536-70
2902000
2460601 2473000
2565203 2575200
536-70LP
2902000
2460601 2473000
2565203 2575200
541-70
2902000
2460601 2473000
2565203 2575200
550-80
2902000
2460601 2473000
2565203 2575200
560-80
2902000
Using the Manual
This operator's manual is arranged to give you a good understanding of the machine and its safe operation.
It also contains maintenance and technical data.
Read this manual from the front to the back before you use the machine for the first time, even if you have used
machines of a similar/same type before as the technical specification, systems and controls of the machine
may have changed. Particular attention must be given to all the safety aspects of operating and maintaining
the machine.
If there is anything you are not sure about, ask your JCB dealer or employer. Do not guess, you or others could
be killed or seriously injured.
The general and specific warnings in this section are repeated throughout the manual. Read all the safety
statements regularly, so you do not forget them. Remember that the best operators are the safest operators.
The illustrations in this manual are for guidance only. Where the machines are different, the text and or the
illustration will specify.

Introduction
About this Manual
2 9831/0100-6 2
The manufacturer's policy is one of continuous improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will be accepted for discrepancies which may occur
between specifications of the machine and the descriptions contained in this manual.
All of the optional equipment included in this manual may not be available in all territories
Left-Hand Side, Right-Hand Side
In this manual, 'left' and 'right' mean your left and right when you are seated correctly in the machine.
Figure 1.
A
B
ALeft BRight
Cab/Canopy
This manual frequently makes references to the cab. For example, 'do not operate the machine without an
operator's manual in the cab'. These statements also apply to canopy build machines.
Cross References
In this manual, cross references are made by presenting the subject title in blue (electronic copy only). The
number of the page upon which the subject begins is indicated within the brackets. For example: Refer to:
Cross References (Page 2).

Introduction
Safety
3 9831/0100-6 3
Safety
Safety - Yours and Others
All machinery can be hazardous. When a machine is correctly operated and maintained, it is a safe machine
to work with. When it is carelessly operated or poorly maintained it can become a danger to you (the operator)
and others.
In this manual and on the machine you will find warning messages, you must read and understand them. They
inform you of potential hazards and how to avoid them. If you do not fully understand the warning messages,
ask your employer or JCB dealer to explain them.
Safety is not just a matter of responding to the warnings. All the time you are working on or with the machine
you must be thinking of what hazards there might be and how to avoid them.
Do not work with the machine until you are sure that you can control it.
Do not start any work until you are sure that you and those around you will be safe.
If you are not sure of anything, about the machine or the work, ask someone who knows. Do not assume
anything.
Remember:
• Be careful
• Be alert
• Be safe.
Safety Warnings
In this manual there are safety notices. Each notice starts with a signal word. The signal word meanings are
given below.
The signal word 'DANGER' indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
The signal word 'WARNING' indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
The signal word 'CAUTION' indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
The signal word 'Notice' indicates a hazardous situation which, if not avoided, could result in machine damage.
The safety alert system symbol (shown) also helps to identify important safety messages in this manual. When
you see this symbol your safety is involved, carefully read the message that follows.
Figure 2. The safety alert system symbol

Introduction
Safety
4 9831/0100-6 4
General Safety
Training
To operate the machine safely you must know the machine and have the skill to use it. You must abide by
all relevant laws, health and safety regulations that apply to the country you are operating in. The operator's
manual instructs you on the machine, its controls and its safe operation; it is not a training manual. Ensure that
you receive the correct training before operating any machinery. Failing to do so will result in incorrect operation
of the machine and you will be putting yourself and others at risk. In some markets, and for work on certain
jobsites, you may be required to have been trained and assessed in accordance with an operator competence
scheme. Make sure that you and your machine comply with relevant local laws and jobsite requirements – it
is your responsibility.
Care and Alertness
All the time you are working with or on the machine, take care and stay alert. Always be careful. Always be
alert for hazards.
Clothing
You can be injured if you do not wear the correct clothing. Loose clothing can get caught in the machinery.
Keep cuffs fastened. Do not wear a necktie or scarf. Keep long hair restrained. Remove rings, watches and
personal jewellery.
Alcohol and Drugs
It is extremely dangerous to operate machinery when under the influence of alcohol or drugs. Do not consume
alcoholic drinks or take drugs before or while operating the machine or attachments. Be aware of medicines
which can cause drowsiness.
Feeling Unwell
Do not attempt to operate the machine if you are feeling unwell. By doing so you could be a danger to yourself
and those you work with.
Mobile Phones
Switch off your mobile phone before entering an area with a potentially explosive atmosphere. Sparks in such
an area could cause an explosion or fire resulting in death or serious injury.
Switch off and do not use your mobile phone when refuelling the machine.
Lifting Equipment
You can be injured if you use incorrect or faulty lifting equipment. You must identify the weight of the item to
be lifted then choose lifting equipment that is strong enough and suitable for the job. Make sure that lifting
equipment is in good condition and complies with all local regulations.
Raised Equipment
Never walk or work under raised equipment unless it is supported by a mechanical device. Equipment which
is supported only by a hydraulic device can drop and injure you if the hydraulic system fails or if the control
is operated (even with the engine stopped).
Make sure that no-one goes near the machine while you install or remove the mechanical device.
Raised Machine
Never position yourself or any part of your body under a raised machine which is not correctly supported. If the
machine moves unexpectedly you could become trapped and suffer serious injury or be killed.
Lightning
Lightning can kill you. Do not use the machine if there is lightning in your area.
Machine Modifications
This machine is manufactured in compliance with prevailing legislative requirements. It must not be altered in
any way which could affect or invalidate its compliance. For advice consult your JCB dealer.

Introduction
Safety
5 9831/0100-6 5
Clothing and Personal Protective Equipment (PPE)
Do not wear loose clothing or jewellery that can get caught on controls or moving parts. Wear protective clothing
and personal safety equipment issued or called for by the job conditions, local regulations or as specified by
your employer.

Notes:
6 9831/0100-6 6

About the Product
Introduction
7 9831/0100-6 7
About the Product
Introduction
General
Before you start using the machine, you must know how the machine operates. Use this part of the manual
to identify each control lever, switch, gauge, button and pedal. Do not guess, if there is anything you do not
understand, ask your JCB dealer.
Name and Address of the Manufacturer
JCB Excavators Limited, Lakeside Works, Rocester, Uttoxeter, United Kingdom, ST145JP
Product Compliance
Your JCB product was designed to comply with the laws and regulations applicable at the time of its manufacture
for the market in which it was first sold. In many markets, laws and regulations exist that require the owner to
maintain the product at a level of compliance relevant to the product when first produced. Even in the absence
of defined requirements for the product owner, JCB recommend that the product compliance be maintained
to ensure safety of the operator and exposed persons and to ensure the correct environmental performance.
Your product must not be altered in any way which could affect or invalidate any of these requirements. For
advice consult your JCB dealer.
For its compliance as a new product, your JCB and some of its components may bear approval numbers
and marking's, and may have been supplied with a Declaration/Certificate of Conformity. These marking's and
documents are relevant only for the country/region in which the product was first sold to the extent that the
laws and regulations required them.
Re-sales and import/export of products across territories with different laws and regulations can cause new
requirements to become relevant for which the product was not originally designed or specified. In some cases,
pre owned products irrespective of their age are considered new for the purposes of compliance and may be
required to meet the latest requirements which could present an insurmountable barrier to their sale/use.
Despite the presence of any compliance related marking's on the product and components, you should not
assume that compliance in a new market will be possible. In many cases it is the person responsible for import
of a pre owned product into a market that becomes responsible for compliance and who is also considered
the manufacturer.
JCB may be unable to support any product compliance related enquiry for a product which has been moved out
of the legislative country/region where it was first sold, and in particular where a product specification change
or additional certification would have been required in order for the product to be in compliance.