JCM ALCS User manual

www.jcmload.com
[phone]
[email protected]
ALCS Handset user instrucons
Unit 6, Logman Centre, Greenbank Crescent, East Tullos, Aberdeen, AB12 3BG, UK

www.jcmload.com
[phone]
[email protected]
Operang instrucons
Switch on unit by pressing ON buon
To zero unit press ZERO buon
To switch o unit, press and hold ZERO buon
To change baeries, unclip the plasc cover on the back of the handset, remove old baeries and
replace with new 1.5V cells (care being taken on polarity + and – shown on holder case
To change unit type
To change the unit type, (have the handset already on)
Press the (PAGE) buon
Handset will read (UNITS)
Now press the (ON) buon
Handset will now read a (UNIT TYPE)
Press the (PAGE) buon unl, you have the unit type that you require.
Now press the (ON) buon to accept, and handset will go back to reading in unit type that you
requested.
Peak hold
To use Peak hold,
Press the (PAGE) buon 5 mes, unit will display Peak hold, press enter key unit will; show o,
press (PAGE) buon unit will show on, press enter the display is now in peak hold, unit
will stay in peak hold unl it is switched o by going through set up again.
Unit 6, Logman Centre, Greenbank Crescent, East Tullos, Aberdeen, AB12 3BG, UK