Jenn-Air D156 User manual

JENN-AIR ®
Useand Care Manual
Grill-Ranges with Self-Cleaning
Radiant Bake and Convection
Oven
MODELS D156, S176
t

About Your
Jenn-Air
Congratulations on your choice of a Jenn-Air grill-range. The
indoor grilling of meats, fish or fowl is one of the most attractive
and succulent methods of preparing these foods . . . a unique
flexibility made possible by Jenn-Air's patented integral ventilation
system.
Your Jenn-Air self-cleaning oven combines the best of two cooking
methods, convection and radiant bake (conventional) baking or
roasting.
The Jenn-Air convection oven is actually a conventional oven
that circulates heated air within the oven. As both bake and broil
heating elements cycle on and off with the thermostat, a fan keeps
the heated air circulating around the food.
The constantly recirculating heated air in the convection oven
strips away the layer of cooler air that surrounds food. Conse-
quently, many foods cook more quickly. Distributed heat makes
multiple rack cooking possible. Convection roasted meats retain
their natural flavor and juiciness with less shrinkage than radiant
bake roasting.
In addition to the many exclusive benefits of convection cook-
ing, your Jenn-Air oven is also a fine full-featured "bake and broil"
oven.
You can cook your "old favorite" recipes as you have in the past.
The radiant bake oven also gives you the flexibility of preparing
various foods when convection cooking may not be as beneficial,
as when cooking foods in covered casseroles or clay pots.
The broil element is convenient for top browning and oven broiling
of foods.
Before you begin cooking with your new grill-range, please take
a few minutes to read and become familiar with the instructions
in this book. On the following pages you will find a wealth of
information regarding all aspects of using your new grill-range.
By following the instructions carefully,you will be able to fully
enjoy and properly maintain your grill-range and achieve excellent
results with the food you prepare.
Should you have any questions about using your Jenn-Air grill-
range or need a use and care manual for your cooktop cartridge,
write to us. Be sure to provide the model number.
Consumer Relations Department
Jenn-Air Company
3035 Shadeland Avenue
Indianapolis, IN 46226-0901

SAFETY
PRECAUTIONS
Read before operating your range
All appliances -- regardless of the manufacturer -- have the
potential through improper or careless use to create safety prob-
lems. Therefore the following safety precautions should be
observed:
1. Be sure your appliance is properly installed and grounded
by a qualified technician.
2. Never use your appliance for warming or heating the room.
3. Children should not be left alone or unattended in area
where appliance is in use. They should never be allowed to
sit or stand on any part of the appliance.
4. Wear proper apparel. Loose-fitting or hanging garments
should never be worn while using the appliance.
5. Do not repair or replace any part of the appliance unless
specifically recommended in this manual. All other servicing
should be referred to an authorized Jenn-Air Service
Contractor.

6. Flammable materials should not be stored in an oven or
near surface units.
7. Do not use water on grease fires. Smother fire or flame
or use dry chemical or foam-type extinguisher.
8. Use only dry potholders. Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
9. Use proper pan size.Many appliances are equipped with
one or more surface units of different size.Select cookware
having flat bottoms large enough to cover the surface unit
heating element.The use of undersized cookware will
expose a portion of the heating element to direct contact
and may result in ignition of clothing. Proper relationship
of cookware to heating element will also improve efficiency
and performance.
11). Never leave surface units unattended at high heat settings.
Boil over causes smoking and greasy spillovers that may
ignite.
11.On conventional element ranges make sure that drip pans
are in place.Absence of these pans during cooking may
subject wiring or components underneath to damage.
12. Do not use aluminum foil to line surface unit drip pans,
grill basin or oven bottom. Installation of these liners may
result in an electric shock or fire hazard.
13. Glazed cookware -- only certain types of glass, glass-
ceramic, ceramic, earthenware,or other glazed cookpots
are suitable for range top surface without breaking due
to the sudden change in temperature. Use only such
cookware as you know has been approved for this purpose.
14. Cookware handles should be turned inward and not extend
over adjacent surface heating elements to avoid burns,
ignition of flammable materials and spillage due to uninten-
tional contact with the cookware.
15. Do not soak or immerse removable heating elements in
water.
16. CAUTION -- Do not store items of interest to children
in cabinets above a range or on the backguard of a range
--children climbing on the range to reach items could be
seriously injured.
17. Do not touch surface units or areas near units, heating
elements or interior surfaces of oven. Surface units or heating
elements may be hot even though they are dark in color.
Areas near surface units and interior surfaces of an oven
may become hot enough to cause burns. During and after

use, do not touch or let clothing or other flammable mate-
rials contact these areas until they have had sufficient time
to cool. Other surfaces may become hot enough to cause
burns -- among these surfaces are the cooktop, the upper
door frame and glass, oven vent opening and surfaces
near the opening, and the top edge of the control panel.
18.Use care when opening oven door. Let hot air or steam
escape before removing or replacing food.
19. Do not heat unopened food containers.Build-up of pres-
sure may cause container to burst and result in injury.
20. Keep oven vent ducts unobstructed.
21. Always place oven racks in desired location while oven
is cool. If rack must be moved while oven is hot, do not
let potholder contact hot heating element in oven.
22. Do not clean door gasket. The door gasket is essential
for a good seal.Care should be taken not to rub, damage
or move the gasket.
23. Do not use oven cleaners. No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
24. Clean only parts listed in this manual and use procedures
recommended.
25. Before self-cleaning the oven, remove broiler pan and other
utensils.
26. Listen for fan. A fan noise should be heard during the
broil and cleaning cycles. If not, call a serviceman before
self-cleaning again.
27. Do not cook on glass-ceramic cooking surface if the cook-
top is broken. Cleaning solutions and spillovers may pene-
trate the broken cooktop and create a shock hazard.
Contact an authorized Jenn-Air Service Contractor.
28. Clean glass-ceramic cooktops with caution. If wet sponge
or cloth is used to wipe spills on a hot cooking area, be
careful to avoid steam burns. Some cleansers can produce
noxious fumes if applied to a hot surface.
29. Do not operate with damaged cooking element after any
product malfunction until proper repair has been made.
30. Keep all switches "OFF" when unit is not in use.
31. Do not allow aluminum foil or meat probes to contact
heating elements.
32. WARNING S176 OWNERS: To reduce the risk of
tipping of the appliance, the appliance must be secured
byproperly installed anti-tip devices. Tocheck if devices
are installed properly,remove the access panel and verify
thatthe anti-tip devices are engaged.

Cooktop and
Grill Operation
Cooktop and Grill Controls
Ventilation System and Air
Oven Light Switch Grille Oven Vent Oven Control
Panel
Surface Surface
Light Indicator
jLight
Surface
Controls
Grease
Container
Ventilation System and Oven Light Switch
• Use toturn onventilation system or oven light manually. (See page 9.)
Surface Indicator Light
•Will glow when a surface unit is on.(See page 10.)
Surface Controls
• Useto provide variable heat to cooktop heating elements or grill element.
(See page 10.)
Grease Container
• Collects grease when grilling or using other accessories; or spillovers when
using conventional coil cartridge. (See page 16.)
lNOTE: For information on oven and clock controls, see page 18. J

Ventilation System
The built-in ventilation system removes cooking vapors, odors and smoke from foods
prepared on the cooktop, grill and grill accessories.
Regular use of this system will insure a more comfortable and less humid kitchen
which is free of heavy cooking odors and fumes that normally create a frequent need
for cleaning and redecorating.
Using the Ventilation System
• To operate the ventilation system manually,push the
three position VENTILATION AND OVEN LIGHT
SWITCH located in front of the air grille toward the
fan symbol. To turn the fan off, push the switch to
the middle position. If the switch is pushed toward
the light symbol, the oven light will be turned on.
• The ventilation system will operate automatically when the grill element is in
use.
•Besides using the ventilationsystem toremove cooking vapors and fumes, it
can be used to cool baked pies, cakes or hot pans. To cool anitem,set it
on the air grille and turnon the fan. The air being pulled over the item will
quickly cool it. Becarefulnot to cover the oven vent or the entire air grille.
•The fancan be used to remove strong odors from the kitchen as when chopping
onions near the fan.
Cleaning the Ventilation System
Air Grille: The air grille lifts off easily. Wipe clean or wash in sink with mild household
detergents. May be cleaned in dishwasher. NOTE: The oven vent is located under
the grille.When using or cleaning the oven, hot and moist
air may be noticed in this area. Be careful not to spill anything
into this vent.
Filter: Turn off ventilation system before removing.The
filter is apermanent type and should be cleaned when soiled.
Clean in sink with warm water and liquid dishwashing
detergent or in dishwasher.
IMPORTANT: Filter should always be placed at an angle.As you face the front of
the range, the top of the filter should rest against the left side of the vent opening
and the bottom of the filter should rest against the right side of the ventilation chamber
at the bottom. DO NOT OPERA TE SYSTEM WITHOUT FILTER.
Ventilation Chamber: This area, which houses the filter, should be cleaned
in the event of spills or whenever it becomes coated with a film of grease. May
be cleaned with paper towel, damp cloth or sponge and mild household detergent.
9

Surface Controls
The variable heat controls for the cooktop cartridges and grill element provide flexibil-
ity in heat setting selection.
To Set Controls
• Since the controls are a push-turn type, they must be pushed down before turning. To
set (from the OFF position), push down on control knob and turn in either direction
to desired heatsetting.
• When control is in any position,other than OFF,it may be turned in any direction without
pushing down.
• A red indicator light will glow when a surface heating element is ON.There are two
indicator lights, one for the heating elements on the left side of the range, one for the
heating elements on the right side of the range.
_iiiiiii iii_,iiiii
!
1.2.3.4.
Control Locations
1.Left rear heating element (rear Energy-Saver) _ =
2. Left front heating element (front Energy-Saver)
3. Right front heating element (front Energy-Saver) .........
4. Right rear heating element (rear Energy-Saver) Energy-Saver
Nole:The "Energy-Saver" grill element (above,right) permits utilizing only half of the grill area, if desired,
or using different heat settings for the front and rear position of the element. When using this element,
both cooktop controls, front and rear, must be turned on in order to use the full grill area.
Suggested Control Settings
The size and type of cookware and the amount and type of food being cooked will influence
the setting needed for best cooking results. Electrical voltage may also vary; this will affect
the needed control setting. The setting indicated should serve as a guide while you become
familiar with your range.
HI A fast heat to start cooking quickly, to bring liquids to a boil, to preheat oil for deep
fat frying.Use for most grilling.
7-10(Medium High) For fast frying or browning foods, to maintain rapid boil of large amounts
of food, to maintain oil temperature for deep fat frying.
5-6 (Medium) For foods cooked in a double boiler, sauteing, slow boil of large amounts
of food, and most frying.
3-4 (Medium Lo) To continue cooking foods started on higher settings.
LO-2Maintaining serving temperatures of foods, simmering foods, melting butter or chocolate.
The heat controls offer flexibility in heat setting selection. On settings other than HI, you
may adjust the controls above or below the numbered setting for best results. This applies
to settings when using cooktop cartridges or when using the grill or any of the grill accessories.
Suggested settings are provided as general guidelines.
Cleaning and Removing Control Knobs
To remove knobs, turn to OFF position. Wash knobs in warm soapy water or dishwasher;
do not use abrasive cleansers or materials.To replace knobs, match flat part of knob opening
with the spring on the shaft, returning in OFF position.
10

Using Cooktop
Cartridges
Cooktop cartridges, either conventional coil, glass-ceramic, solid element or induction,
can be installed on either side of the range.
To Install Cartridges
1.If the grill element, grill-rocks or grates are in place, remove before installing
a cooktop cartridge. Clean grill basin of any grease accumulation.(See page
16 for cleaning recommendations.)
2. To install any of the optional cooktop cartridges,first be sure control knobs are
turned OFF. Position the cartridge terminal plug towards the terminal receptacle.
This receptacle is located at the front of the left side and at the back of the
right side of the range.
3.Slide the cartridge towards the receptacle until the cartridge terminal plug is
completely engaged.
4. Lower the opposite end of the cartridge into the range top until it is flush with
the surface. Your range is now ready to use.
To Remove Cartridges
1. Control knobs must be in the OFF position and the cartridge should be cool.
2. Lift up on the "tab" located on the cartridge until top of cartridge clears the
opening on the range top by about 2 inches. Lifting the cartridge too high
while still engaged in the receptacle could damage the terminal plug.
3. To disengage terminal, hold cartridge by the sides and slide away from the
terminal receptacle. Lift out when fully unplugged.
4. A storage tray, Model A350, is available and can be used for storing a cartridge
(except the induction cartridge).
5. Do not stack cartridges where they may fall or be damaged. Never store other
materials on top of the glass-ceramic cartridges since this could damage or
mar the surface.
Home Canning
Canning should be done on the conventional coil or induction cartridge only. Canning
element accessory, Model A145, makes it possible to use large canners with
conventional coil cartridge. 11

G]l illlng
The grill accessory consists of two black grill grates, a grill element and two grill-rocks.
To Install Grill
1. Before installing grill components, be certain surface controls are in the OFF position.
2. Place the two grill-rocks into an empty grill basin with their handles running parallel to
the front of the range. These grill-rocks must be used since they support the grill
eiement.
3. Position the grill element with the terminal plug towards the terminal receptacle. This
receptacle is located at the front of the left side and at the back of the right side of the
range. Slide the element towards the receptacle until the terminal plug is completely
engaged.
4. The grill element should now rest on the handles of the grill-rocks.
5. Place the black grill grates on the top of the range top.
ToRemove Grill
1. Remove grill components once they are cool. Besurecontrol switches are in the OEF
position.
2.To remove grill element, pull away from receptacle until it is unplugged. Do not lift the
element while Jtis engaged in the receptacle since this could damage the terminal.
3. A storage tray, Model A350, is available for purchase and can be used for storing the
grill assembly.
Installing Other Accessories
1. Remove the two black grill grates from the grill. Now you are ready to use the optional
grill accessories.
2. Review the instructions for installing and using the accessories that are packaged with
the accessory. 12