Jimi VL04 User manual
Content
Appearance ............................................................................... 3
Accessories................................................................................ 4
Quick Setup ............................................................................... 4
➢Insert SIM Card .............................................................................................4
➢Insert & Power on.........................................................................................5
➢Download Tracksolid App.............................................................................6
➢Sign up & Login.............................................................................................6
➢Bind Device...................................................................................................7
Ensure Device Online................................................................. 9
➢Status Indicator.............................................................................................9
➢Device Inactive..............................................................................................9
➢Device Offline ...............................................................................................9
➢Set SOS number..........................................................................................10
Troubleshooting....................................................................... 11
➢LED Indicators.............................................................................................11
➢Set up APN..................................................................................................12
➢Get Help......................................................................................................13
Main Functions........................................................................ 14
➢Bottom Menu .............................................................................................14
➢Console Menu.............................................................................................14
➢Real Time Tracking......................................................................................15
➢History Playback .........................................................................................16
➢Geo Fence...................................................................................................17
➢Set Work Mode...........................................................................................18
➢Command List.............................................................................................19
➢Specifications..............................................................................................20
3
Appearance
Speaker
Power LED
GNSS LED
Network LED
OBD II Port
SIM Card Slot
Debug Data Port
(For Business Clients)
4
Accessories
SIM Card Base
User Manual
* Note: A SIM card is necessary to use the GPS locator. Please prepare a SIM card
compatible with the device.
Quick Setup
➢Insert SIM Card
⚫Put Nano SIM into the SIM card base.
⚫Insert the SIM card base into the SIM card slot with the arrow sign
towards inside.
Insert SIM
Insert & Power on
Download App
Sign up & Login
Bind Device
5
What SIM Card should I Choose?
Frequency Band
4G LTE-FDD: B1/B3/B5/B7/B8/B20/B28
4G LTE-TDD: B38/B40/B41
2G GSM: B2/B3/B5/B8
Required Service
Data & SMS & Voice Call
SIM Type
Nano Size
➢Insert & Power on
1. Connect the device to the OBD port when the vehicle is ignition off.
*You may find the OBD port in A to E spots marked on the picture down below.
2. Observe the LED against LED Indicators to ensure that the device
enters work mode correctly.
*If the Network LED is off, usually means the device may not recognize the APN of
the SIM card. Please refer to Set up APN to set the APN manually.
6
➢Download Tracksolid App
⚫Search “Tracksolid” in App Store or Google Play to download.
⚫Scan the QR down below to download.
➢Sign up & Login
①Input your email
②Click ‘->’ to get verification code
③Type in the code you find in email
④Set up and confirm Password
⑤Agree the Terms
⑥Click on Submit
⑦Login with the email and password
①
②
③
④
⑤
⑥
⑦
7
➢Bind Device
1. Click the ‘+’ on the top right to add device.
2. Scan or type in the IMEI number on the package or device body.
3. Click ‘Add Device’ to confirm binding.
Find the IMEI barcode
on package or device
Add Device
Scan
Barcode
8
⚫Edit basic info about this device, or click on ‘Save’ directly to skip this
step.
⚫You can come back and edit the info anytime in the ‘Detail’ Page.
Edit
9
Ensure Device Online
1. Go to ‘List’, you will see the VL04 you just bind.
2. You can tell the status of the device via the color of the icons.
3. To get a location or send any command, the device must be online.
➢Device Inactive
⚫Usually inactive is because the device cannot match the APN. Please
refer to Set up APN.
⚫Contact us with your IMEI number attached to get a technical support.
➢Device Offline
⚫Check whether the device is well inserted into the OBD.
⚫Check whether the SIM card got sufficient balance.
⚫Check the LED indicators to find reasons.
⚫Contact us and provide the IMEI number to get a technical support.
OFFLINE
➢Status Indicator
10
➢Set SOS number
⚫After device is online, you can set an SOS number to receive SMS
alert or trigger a voice monitor call.
1. Find your device in the list page, click on the icon.
2. Go to ‘Command’ page to set the SOS number.
⚫Set SOS number
①Type in your number
②Click ‘Send’
⚫Delete SOS number
①Choose corresponding number
to delete
②Click ‘Send’
11
Troubleshooting
➢LED Indicators
LED
Status
Meaning
Quick Solution
Red
Solid on
Fully charged
Unplug the device
from OBD II Port
and install again.
Off
Battery died / Malfunction
Flicker Quickly
(0.1s on; 0.1s off)
Low battery
Flicker Slowly
(0.1s on; 2s off)
Working properly
Flicker Slowly
(2s on; 2s off)
Charging
Blue
Solid on
Fixed a position
Bring the device
to open sky and
send command:
GPSON#
Off
In sleep mode or not
operating
Flicker Quickly
(0.3s on; 0.3s off)
Searching GPS signals
Green
Solid on
Online / Calling
Bring the device
to a place with a
better network
signal. Or send
the correct APN
command
Off
Network error or no SIM
detected
Flicker Quickly
(0.1s on; 0.1s off)
The GMS is initializing
Flicker Slowly
(0.1s on; 2s off)
Working properly
* Describing the LED status when contacting us will help locate the problem.
12
➢Set up APN
⚫If your device is unable to activate, you may need to set up APN when
first time use.
Step 1 - Confirm the SIM card frequency band compatible with VL04
(850/900/1800/1900MHz).
Step 2 -Insert the SIM card into your smartphone and disable the PIN code.
Step 3 - Get the APN name from carrier or Google it.
Step 4 -Insert SIM back into the device and power on VL04, then send an
SMS command (APN,APNname#) to the SIM card.
e.g.:
13
APN name: mobilenet
Then send the command:
APN,mobilenet#
(No spaces between the commands)
Step 5 – Reboot the device and find it online.
➢Get Help
⚫Email us: [email protected]
⚫Messenger us on Facebook: M.Me/LNCOON
⚫Live chat via WhatsApp: +86 13423860204
14
Main Functions
➢Bottom Menu
➢Console Menu
1. Tapping the icon to check the device.
2. Tapping the button to expand the menu.
Device Status
Last Location
Console Menu
Map Page
Device List
Alerts Report
Account Setting
Note:
If there is no map display, please install Google Maps app.
15
➢Real Time Tracking
⚫Tapping on ‘Tracking’ to enter tracking page.
Map Type
Show Traffic
Street View
Locate VL04
Device Status
Show the Address
Share Location
16
➢History Playback
⚫Click ‘Playback’to search the track among the past 6 months.
Select the time period and click "OK"
VL04
v
Calendar Report
Play & Pause
Speed up
Hide & Show the line
Choose another period
17
➢Geo Fence
⚫Click ‘Geo Fence’ to manage your customized fences.
⚫
Add Fence
Search Landmark
Set Radius
Rename Fence
Confirm Create Fence
Alert Trigger Option
18
➢Set Work Mode
⚫Find your device in the list page, click on the icon.
⚫Go to ‘Command’ page to set a work mode based on different
situations, to get a more accurate location or longer standby time.
⚫Explore more setting options to design your own tracking style.
⚫These commands can only be affected when devices is online.
⚫If you are confused about these settings, please feel free to contact
us.
Setting Tag
Explanations
Click After Changing
Parameters
Setting Options
19
➢Command List
⚫Command can be send via SMS
⚫Send online command via ‘User-Defined’ in the Command Page
Function
Command
Explanation
Check Status
CHECK#
Get device status
Get Location
WHERE#
Get current location
Set SOS Number
SOS,A,number#
Set SOS number as ‘number’
Set APN
APN,name#
Set APN as ‘name’
Positioning Time
Timer,T1,T2#
T1 T2=5~18000, integer in seconds
Report every T1 seconds when ACC ON
Report every T2 seconds when ACC OFF
Anti-theft Mode
DEFMODE,X#
X=0, Automatically activate defense mode
when ACC off
X=1, Manually defense mode
Defense ON
111#
Keep the vibration alarm enable when Acc off
Defense OFF
000#
Keep the vibration alarm disable when Acc off
* No Spaces between commands. Contact us to get a full version list.
20
➢Specifications
Positioning
Positioning system
GPS/Glonass/BDS/QZSS
AGPS/LBS Assisted
Frequency
L1
Track accuracy
<2.5m CEP
Network
Communication network
LTE Cat1 + WCDMA + GSM
Frequency
4G:
LTE-FDD: B1/B3/B5/B7/B8/B20/B28
LTE-TDD: B38/B40/B41
2G:
GSM: B2/B3/B5/B8
Power & Function
Battery
50mAh industrial-grade LiCo battery
Data storage
8Mb
Ignition detection
External Power Voltage
Physical Specification
Dimensions
65.0 ×50.0 ×25.0mm
Weight
60g
Sensors
Accelerometer and gyroscope
Voice monitoring range
≤5 meters
Table of contents
Other Jimi GPS manuals
