Jinan USR IOT Technology LonHand USR-HTW User manual

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 1 / 21 [e-mail]
LonHand Series Product Specification
USR-HTW Version: V1.0

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 2 / 21 [e-mail]
Content
1. Quick start.............................................................................................................................................. 3
1.1 WLAN Control Operation ................................................................................................................... 4
1.2 Equipment Network Settings................................................................................................................ 6
1.3 Remote control................................................................................................................................... 8
2. Product Introduction............................................................................................................................... 10
2.1 Product Description .......................................................................................................................... 10
2.2 Details ............................................................................................................................................ 10
2.3 Indicator and Key Function Introduction.............................................................................................. 11
2.4 Smartlink Instructions....................................................................................................................... 12
2.5 WPS Instructions.............................................................................................................................. 13
3. Instructions for Use................................................................................................................................ 14
LonHand of Windows Introduction ................................................................................................................. 18
Contact Information...................................................................................................................................... 21
Disclaimer ................................................................................................................................................... 21
Update History............................................................................................................................................. 21

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 3 / 21 [e-mail]
1. Quick start
Preparation:
1.Supply the USR-HTW with a DC power 5V up to 24V.
Note the polarity. ‘+’ represents positive, ‘-’represents negative i.e. ground.
2.Installation LonHand software to mobile phone
You can download LonHand software from official website
http://www.usr.so/Download/117.html, click on the floppy symbol then download LonHand
software. The Product information CD contains all versions of software. We supply back-end
server and software on different platforms such as Windows, IOS, Android and MAC system.
Install it on your computer or your cell phone or your pad.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 4 / 21 [e-mail]
IOS system users can download software from App store for free. Because there are few
differences of software interface between IOS system and Android system, we will illustrate how
to use it on iphone now and later, as an reference to android system users.
Lonhand software are green edition, if you do not need just delete its installation directory and its
shortcut icon(windows system).
1.1 WLAN Control Operation
1. Connect Smartphone to USR-HTW’s wireless network
Open the settings, find USR-HTW in WLAN, connected to the network, as shown below.
2. Open LonHand software. Slide to the fourth page, click on start button.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 5 / 21 [e-mail]
3. Control menu
Enter the equipment list, find the USR-HTW, click the USR-HTW tab, enter into the control
menu.
4. Control Test
User can monitor the USR-HTW now.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 6 / 21 [e-mail]
1.2 Equipment Network Settings
1. Open LonHand software，refresh the equipment list，click device icon, select Login device.
2. Enter the default user name and password (admin) into pop-up window , enter the fast setting
page. The web Webpage default is Chinese Webpage, users can click on the English to switch to
the English Webpage。

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 7 / 21 [e-mail]
3. Click Scan router to get the router information list, and then select the router which want to
connect, click OK.
4. Input router passwords, save it, and then restart.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 8 / 21 [e-mail]
5. USR-HTW will connect to the router automatically after restart, the blue indicator will light up.
1.3 Remote control
1. After USR-HTW connected to the router, please let mobile phone also connect to the same
router. Select the user center in LonHand software, register remote control account, and then
login in.
2. Return device interface, refresh the list of equipment, can see the USR-HTW equipment. Long
press equipment information icon, click activate.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 9 / 21 [e-mail]
3. After activate the device, click get activated devices in the user center. Then disconnect the
wireless network, using 2G/3G Internet,, refresh the equipment list, you can see the device icon
into a remote icon, now you can control the devices via internet.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 10 / 21 [e-mail]
2. Product Introduction
2.1 ProductDescription
The USR-HTW is wireless temperature and humidity transmitter, which is WIFI branch of
LonHand series product.
LonHand series control terminals are developed for the application in the field of smart home,
Internet of Things, industrial controlling and so on. They are suitable for rapid deployment, especially
for mobile application because the USR-HTW can be controlled by your cell phone. They can operate
with WIFI connection compared to traditional wired connection. These devices are an ideal choice to
realize remote control.
These series product are suitable for household application to build smart home for more
comfortable life. Also it can be used in industry and agriculture for low cost, high efficiency in
intelligent control of the devices. Users are capable to carry out more effective cost control and gain
higher profits, because there’s no big change and upgrading of your owned equipment under wireless
remote control, users can make full use of your original product without more costs for you.
2.2Details
Table.1 USR-HTW Parameter table
Mechanical Dimensions
86*86*28mm（L*W*H）
Working voltage range
DC 5-24V
Power consumption
Typical：1W Max: 2W
Working temperature
-20-70°C
Working humidity
0～99.9%RH non-condensing
Temperature measuring
range
-40-80°C
Temperature measuring
accuracy
±0.4℃
Temperature measuring
resolution
0.1℃
Humidity measuring
range
0~99.9%RH
Humidity measuring
accuracy
±2%RH （25℃）
Humidity measuring
resolution
0.1%RH
Installation
wall mounting type
Preservation
environment
temperature : -40-85°C
Humidity: <90%RH
Packing List
USR-HTW*1

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 11 / 21 [e-mail]
Table.2 Default settings
Network Mode
AP
AP SSID
USR-HTW
AP Password
null
Device Name
USR-HTW
Device Password
admin
Webpage address in AP mode
10.10.100.254
Account / Password of Webpage
Account : admin
Password:the same to Device Password
Typical application:
Communication base station, archives, warehouse, lab, factory, workshop, machine rooms, museum, library,
hospital, hotel, restaurant, house and so on.
2.3 Indicator and Key Function Introduction
A. Indicator light
Red indicator light: The relay switch indicator in Normal work;
Indicates the action which will execute when Key is long press;
Blue indicator light: Network connection status indicator.
B. Refresh key
Short Press(0~3s): Relay on or off
Long press(5~10s):
Release the key when the red indictor light single flashing, device will execute the
SmartLink intelligent network configuration, if failed configuration after 45s, device
will restart.
Long press(10~15s):
Release the key when the red indictor light twice flashing, device will execute the WPS
intelligent network configuration, if failed configuration after 45s, device will restart.
Long press(15~20s):
Release the key when the red indictor light three times flashing, the device will return
to factory settings, after 8~10s, the device information will be the default settings.
Temperature max:
Display the max value in last 1 hour after you press it.
Temperature min:
Display the min value in last 1 hour after you press it.
Humidity max:
Display the max value in last 1 hour after you press it.
Humidity min:
Display the min value in last 1 hour after you press it.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 12 / 21 [e-mail]
2.4 Smartlink Instructions
Smartlink is a fast and simple method to quickly connect the device to router by smartphone, user
can complete the device network configuration conveniently. The method was not successful in some
routers, if users attempt failed, please choose to use the Webpage to configurate.
The Smartlink configuration process is as follows:
1. Connect the smartphone to the router, open LonHand software, select the network configuration
in more bar, and fill in the router password.
2. Press the key 5~10s, until the red indicator light single flashing, release the key, the device will
go into SmartLink working mode, the blue indicator lights is flashing, device is waitting for the
configuration.
3. Click the connect button LonHand software, start network configuration,the blue indicator light
will become slow flash in the configuration process.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 13 / 21 [e-mail]
4. When the blue indicator light lighting stably, the network configuration is success, mobile
phone will be prompted to configure the success. if failed configuration after 45s, device will
restart.
2.5 WPS Instructions
WPS is a directly matching method for connection between the device and the router, it require the
router support WPS function. Because of the differences of router WPS function, some WPS
configuration is not successful, if WPS configuration failed, please select Webpage configuration.
The WPS configuration process is as follows:
1. Start the WPS function of router
2. Press key 10~15s, until the red indicator light double flashing ,release the key to start WPS
function.
3. When device searched the WPS signal, the blue indicator would flashing. If the equipment is
not found WPS signal within 1 minutes, will end configuration.
4. When the blue indicator light lighting stably, the network configuration is success, mobile
phone will be prompted to configure the success. if failed configuration after 45s, device will
restart.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 14 / 21 [e-mail]
3. Instructions for Use
Connect the wireless router via Webpageconfiguration. Other computer operating system can
refer to this configuration process. The configuration, require the computer has a wireless network card.
1. The HTW’s default work mode is AP mode. After the HTW work, double-click wireless network
button to get the wireless list.
2. Find “USR-HTW” and connect it.
3. Open the Website of HTW,IP address: 10.10.100.254.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 15 / 21 [e-mail]
Picture.1 Login the web
4. Input the account and password, default: admin,admin.
Picture.2 Enter the web
5. Click Scan router to get the router information list, and then select the router which want to connect,
click sure。
Picture.3 Scan router
6. Input router passwords, save it.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 16 / 21 [e-mail]
Picture.4 Input the router password
7. Restart HTW.
Picture.5 Restart
HTW will connect to the router automatically after restart, the blue indicator will light up. Now you
can control HTW via internet. The detailed operation please refer to the manual of LonHand.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 17 / 21 [e-mail]

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 18 / 21 [e-mail]
4. LonHand of Windows Introduction
The computer and USR-HTW need to connect to the same router. The detailed operation please
refer to the manual of LonHand.
1. Open the LonHand software
Picture.6 LonHand interface
2. The software will search HTW automatically. If you don’t see HTW in software, please click
to search again.
3. After searched HTW, you can see the information as following. If the WIFI symbol is gray, means
HTW is not connected to computer. If the WIFI logo is blue, means HTW is connected to computer.
Picture.7Device list
4. Click HTW,enter into control menu.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 19 / 21 [e-mail]
Picture.8control menu
The control menu displays the values of temperature and humidity.
5. Remote control
First,you need to register a user account (account number and the password 4-8 characters, can be
numbers, letters, combination of numbers and letters, case sensitive),and then login.
Picture.9User menu interface
Picture.10 remote account management interface
6. Active HTW
Return device interface, refresh the list of equipment, can see the USR-HTW equipment. Click
,then click active.After active device success,click Synchronized to local, refresh the equipment list,
you can see the device icon into a remote icon, now you can control the devices via internet.

USR-HTW UserManual www.usr.so
Jinan USR IOT TechnologyLimited 20 / 21 [e-mail]
Picture.11 Active device
Picture.12 Remote control
Mobile phone remote control refer to the first chapter or the manual of LonHand.