JLab GO WORK User manual

GO WORK HEADSET
Turn on Bluetooth in
your device settings.
Press and hold button
for 8 seconds. Release.
Lights will flash blue/red.
BLUETOOTH PAIRING
1
MULTIPOINT (CONNECT 2 DEVICES SIMULTANEOUSLY)
Select “JLab GO Work” in your
device settings to connect.
32
Once FIRST device is connected,
turn off Bluetooth in device
settings. GO Work will auto
enter Bluetooth Pairing.
Enter your SECOND device
Bluetooth settings and connect
to GO Work.
1Enter your FIRST device settings.
Turn on Bluetooth and reconnect
to GO Work.
32
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
FAQs & more
Bluetooth
Settings
Bluetooth
Settings
JLab GO Work
Bluetooth
Settings
JLab GO Work
Bluetooth
Settings
JLab GO Work Connected JLab GO Work Connect
For more info and troubleshooting on MULTIPOINT visit: JLAB.COM/MULTIPOINT
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
W
A
R
R
A
N
T
Y
S
U
P
P
O
R
T
T
E
A
M
#
T
E
A
M
J
L
A
B

VOLUME UP: Press once
TRACK FORWARD:
Press and hold 2+ seconds
SWITCH EQ VOICE /MUSIC:
Press and hold both buttons
simultaneously
VOLUME DOWN: Press once
TRACK BACKWARD:
Press and hold 2+ seconds
POWER ON/OFF:
Press and hold 2+ seconds
PLAY/PAUSE/ANSWER/HANG UP CALLS:
Press once
REJECT INCOMING CALL:
Press and hold 1+ second
ACTIVATE SIRI (iOS) OR “OK GOOGLE”
(ANDROID): Press twice
HEAR YOURSELF ON/OFF:
Triple Press (when on call)
BLUETOOTH PAIRING:
See Bluetooth Pairing.
BUTTON FUNCTIONS
CHARGING
Connect to computer or USB 5v 1A (or less) output device.
Note:
GO Work can simultaneously charge while Bluetooth is connected.
Power on and connect to device after charging occurs.
AUX INPUT
GO Work can be used as a wired headset with AUX cable.
Note: The headset will still use a limited amount of battery for the
microphones to function.
MICROPHONE
MUTE ON /OFF
MUTE ONMUTE OFF
CHARGING
OR
BOOM MICROPHONE
can rotate to left or right side

CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
JLAB.COM
Shop products |Product alerts |Burn-in your headphones
JLab Store + Burn-in Tool