JLab GO User manual

User Manual for JLab GO Bluetooth Headset
Thank you for purchasing the JLab GO Bluetooth headset! Like all JLab products the
JLab GO Bluetooth headset comes with a one year limited warranty supported by
world class customer support! If you have any questions about this product we
suggest you visit www.jlab.com/support or call us at 1-800-XXx-XXXX
Features of the JLab GO Bluetooth Headset:
What’s in the box
1 JLab GO Bluetooth Headset 1pc
2.USB Charging cable 1pc
3.Quick Start Guide 1pc
4. Serial # and Registration Card 1pc
Compatible Devices
1. Bluetooth enabled smart phone or cell phone, including iPhone, Android, and Blackberry.
2. PC or Mac with built-in Bluetooth or with a 3rd party USB adapter.
3. Tablets with Bluetooth features, including iPad and most Android & Windows tablets
Getting Started
Charging the JLab GO Bluetooth Headset
The headset contains a built-in rechargeable lithium-ion battery. The device ships from the JLab
factory with a small amount charge used to test the device prior to delivery. While we know you’re
excited to use your new headset, it’s important to charge the device fully for 4 hours prior to use.
After the first charge a 1-2 hour charge time can be expected. While charging, the LED lights on the
bottom will be bright blue and when charging is complete the lights will turn off. A fully charged
battery will support around 5 hours of continuous use.
To charge, simply connect the USB cable to the device and then to a USB 2 port on a computer.

Button Definition and Function
S1 Play/Pause music / Refuse incoming call
S2 Next Song
S3 Previous Song
S4 On/Off , Pairing, Accept call
S5 Volume up
S6 Volume down
LED light indicators
How to pair your JLab GO Bluetooth headset with your
Bluetooth compatible device:
Pairing is a process that securely connects Bluetooth enabled devices to each other. The
process will only have to be done once per device that you wish to connect. Please follow the
steps below to pair your JLab GO Bluetooth headset to your Bluetooth capable device.
1. Press and hold the S4 key for 10 seconds or until the red & blue lights start flashing
alternately. Release the S4 button and quickly press once again. The device is now ready to
be paired with another Bluetooth compatible device.
2. Begin to pair with your compatible device (Please refer to device user manual). A search
for devices will show “JLab-1BT” in your device list. Select this device.
3. You will be required to enter Pin-Code: Enter Pin-Cod: 0000
4. Pairing is now complete.
Note:
It the JLab headset can’t find a device to pair with within 3 minutes, it will automatically shut-down.
In order to pair the 2 devices, the headset and the device must both be in pairing mode.

General Use
Power On:
Press and hold the S4 key for 2 seconds or until the blue and red LED flashes and then release. The
headset will then attempt to connect to previously paired devices. If successful one of 3 things will
happen:
1. Red light will flash slowly, indicating a mono connection
2. Blue light will flash slowly, indicating a stereo connection
3. Blue and red lights will flash slowly indicating a mono and stereo connection (most smart
phone connections will connect with mono and stereo)
Power Off
Press and hold the S4 key for 2 seconds or until the blue and red LED flashes and then release. The
device is now powered off.
Dial, Talk and End calls
After the JLab GO Bluetooth Headset has paired with your mobile device, you can use the headset
to make and receive phone calls.
Receive a call:
You will be notified of an incoming call by a ringing sound through both earbuds. To accept the
call simply depress the S4 button quickly and speak normally. To hang up, press the S4 button
again.
Refuse a call:
If you wish to refuse an incoming call, press the S1 button.
Adjusting the call volume:
To adjust the volume of the speaker while talking press the volume up bottom. To lower the
volume press the volume down button. Once you reach the maximum or minimum volume
points, a gentle beeping sound will be heard through both earbuds.
Listening to Music
After the JLab GO Bluetooth Headset has paired with your mobile device or MP3 player, you can
use the headset to listen to and control music. Please follow the instructions included with your
device to change the speaker output to JLab-1BT.
Play/Pause Music
To play and pause music press button S1. If you wish to move to the next song press button S2
and if you wish to hear the previous song press button S3.
Playing music, press S3 key quickly to next song.

Troubleshooting Tips
1. Red light flashes slowly: The JLab headset needs to be recharged.
2. If you hear no sound through the earbuds, please check the following:
a. Ensure the headset is charged fully and powered on
b. Ensure the headset is paired successfully with a Bluetooth compatible mobile
device
c. Ensure the distance between the headset and the compatible device is less than 10
meters
d. Ensure no other Bluetooth devices are paired at the same time.
Features and Specifications
Stereo Compatible Sound
Accept and Receive calls directly from the headset
Headset will automatically pause music when a call is incoming
High-fidelity, CD quality sound
Control music selection from the headset
High sensitivity, omni-directional microphone design, voice clarity, no echo;
Specification:
Product Name
JLab GO Bluetooth Headset
Product Type
JLab-BT1
Edition
Bluetooth V2.1+EDR
Frequency coverage
2.402GHZ~2.480GHZ ISM Band
Sensitivity
-80dbm
Wireless Transmitter Standard
CLASS 2
Channel
79channels of 1Mhz BW
Contact Terms
Point-to-Point
Transmit Range
10Meters or less
Frequency Response
20HZ-20KHZ
S/N rate
80db>
Speak power rate
2X10mW
Status Indication
LED indicators
Pairing products
AD2P, ACVRP Bluetooth protocol of the computer,
USB Bluetooth adapter, Bluetooth cell phones
Battery
Lion. 3.7V 150mA
Charge Time
1-2 hours after initial charge of 4 hours
Charge Power
Standard USB 5V
Operating time
More than 5 hours on a single charge