JMTek BWPC100 User manual

Wireless Charger Instruction Manual
Congratulations on your purchase of this Wireless Charger.
To ensure a long service life and optimal functionality of this product we recommend that you
read this manual carefully.
Package Content
1 Wireless Charger
1 USB Charging Cable
1 User Manual
Specifications
Input: 5V⎓2A，9V⎓2A，12V⎓1.5A
Wireless Output: 5W, 7.5W, 10W, 15W
Charging distance≤6mm
Instructions
1. Connect the wireless charger with the included USB charging cable to the wall charger and plug
the charger into an electronic socket. while the red led will light up.
2. Place the smartphone with the display facing up on the center of the wireless charger or adjust
the placement position until the charging process starts. Then the blue led lights up.
3. When the smartphone is fully charged, remove it from the wireless charger.
. When the charging is completed, your smartphone will indicate that the battery is full.
(check the smartphone’s battery status using the charging icon displayed on the screen)
4. To save energy, unplug the charger when not in use.
General usage tips
. Do not place any metal objects between the smartphone and the wireless charger
. To ensure more effective charging, remove protective cases.
. Charging time depends on battery capacity, phone input specifications, current phone energy
consumption, phone position on the wireless charger, charging distance, etc.
Possible causes of wireless charging problems
. Your device is not compatible with the Qi wireless charging standard.
. Your device is placed on the wireless charger in a wrong way. See the manual of your
smartphone to find the exact place of the built-in Qi wireless charging receiver.
. A protective case of the smartphone or another object on the back of the smartphone is
blocking the charging process.
. The USB charger is too weak, defective or unplugged from the electric socket.
. The charging cable is unplugged, broken or too weak for correct functioning.
Safety information
BWPC100

. Do not drop or cause an impact on the device.
. Do not disassemble, modify or repair your device.
. Keep away from humidity and heat.
. Keep it beyond the reach of children.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.