JMTek WPC900 User manual

201216 Steven
WPC900-SMS-JMT001
WPC900
70431-0167-01
160mm
90mm
Fast Wireless Charger Instruction Manual
Please read the following carefully before using the device to ensure
safe and proper use.
.This charger works with all Qi-compatible devices (please make sure your
device is Qi-compatible)
.For normal operation, no weakerthan DC 5V, 2A adapter is required.
.For fastwireless charging mode, use the QC 2.0/QC 3.0 or PD adapter and
compatible smartphones.
.This wireless charger can charge smartphones with non-metal protective
case or silicone covers that are no thicker than 6mm.
Connect the USB cable(included) to a power outlet rated at DC 5V/2A or
9V/2A, the Type-C plug to the Type-C input of the wireless charger.
Place your Qi compatible phone with inductive (wireless) charge feature onto
the charger (back of phone to charger), then wireless charging of the phone
will start immediately.
Note- only devices which support Qi wireless charge technology can be
wirelessly charged from this charger, please check your device specifications.
some phone cases do not support Wireless Charging due to the thickness and
design. If your phone is compatible with Wireless Charging and you are unable
to charge it wirelessly, please remove your phone case and retry.
Caution: Do not drop, disassemble or modify this product. Do not expose this
product to fire or excessive heat. Do not expose this product to water or
excessive humidity. Do not put any bare metal on the surface area of the wireless
charger when it is operating.
.Wireless Charger
.USB A to USB-C fast charging cable
.User Manual
.Input: DC 5V,2A/ DC 9V,2A
.Output: 5W/7.5W/10W/15W
. Charging Distance≤6mm
Package Content
Specifications
Instructions
General information
i
Wireless Charger Instruction Manual
Please read the following carefully before using the device to ensure
safe and proper use.
.This charger works with all Qi-compatible devices (please make sure your
device is Qi-compatible)
.For normal operation, no weakerthan DC 5V, 2A adapter is required.
.For fastwireless charging mode, use the QC 2.0/QC 3.0 or PD adapter and
compatible smartphones.
.This wireless charger can charge smartphones with non-metal protective
case or silicone covers that are no thicker than 6mm.
Connect the USB cable(included) to a power outlet rated at DC 5V/2A or
9V/2A, the Type-C plug to the Type-C input of the wireless charger.
Place your Qi compatible phone with inductive (wireless) charge feature onto
the charger (back of phone to charger), then wireless charging of the phone
will start immediately.
Note- only devices which support Qi wireless charge technology can be
wirelessly charged from this charger, please check your device specifications.
some phone cases do not support Wireless Charging due to the thickness and
design. If your phone is compatible with Wireless Charging and you are unable
to charge it wirelessly, please remove your phone case and retry.
Caution: Do not drop, disassemble or modify this product. Do not expose this
product to fire or excessive heat. Do not expose this product to water or
excessive humidity. Do not put any bare metal on the surface area of the wireless
charger when it is operating.
.Wireless Charger
.USB A to USB-C fast charging cable
.User Manual
.Input: DC 5V,2A/ DC 9V,2A
.Output: 5W/7.5W/10W/15W
. Charging Distance≤6mm
Package Content
Specifications
Instructions
General information
i
说明书折法（图非1:1）
说明书折后尺寸：80*90mm
Wireless Charger Instruction Manual
Please read the following carefully before using the device to ensure
safe and proper use.
.Wireless Charger
.USB A to USB-C fast charging cable
.User Manual
.Input: DC 5V,2A/ DC 9V,2A
.Output: 5W/7.5W/10W/15W
. Charging Distance≤6mm
Package Content
Specifications
General information
i
.This charger works with all Qi-compatible devices (please make sure your
device is Qi-compatible)
.For normal operation, no weakerthan DC 5V, 2A adapter is required.
.For fastwireless charging mode, use the QC 2.0/QC 3.0 or PD adapter and
compatible smartphones.
.This wireless charger can charge smartphones with non-metal protective
case or silicone covers that are no thicker than 6mm.
Connect the USB cable(included) to a power outlet rated at DC 5V/2A or
9V/2A, the Type-C plug to the Type-C input of the wireless charger.
Place your Qi compatible phone with inductive (wireless) charge feature onto
the charger (back of phone to charger), then wireless charging of the phone
will start immediately.
Note- only devices which support Qi wireless charge technology can be
wirelessly charged from this charger, please check your device specifications.
some phone cases do not support Wireless Charging due to the thickness and
design. If your phone is compatible with Wireless Charging and you are unable
to charge it wirelessly, please remove your phone case and retry.
Caution: Do not drop, disassemble or modify this product. Do not expose this
product to fire or excessive heat. Do not expose this product to water or
excessive humidity. Do not put any bare metal on the surface area of the wireless
charger when it is operating.
Instructions
160*90mm 70g 书写纸 单面印刷 对折一次

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been testedand found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and canradiate radio frequency energyand, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.