JOBO NANO 8 User manual

1
User Manual
Version 1.0

2
Caution
Precautions and maintenance
For indoor use only
To avoid risk of fire or electric shock, do not expose the unit to moisture or
condensation.
To avoid overheating, do not block the ventilation holes on the back of the Photo
Display.
Keep the Photo Display out of direct sunlight.
Always use the eject buttons on the memory storage card slots to remove the storage
cards.
Do not dismantle the Photo Display. There is a risk of electric shock and there are no
user-serviceable parts inside. Dismantling the Photo Display will void your warranty.
Cleaning the LCD Screen
Treat the screen carefully. Because the screen of the Photo Display is made of glass
and it would easily be broken or scratched.
If finger prints or dust accumulate on the LCD screen, we recommend using a soft,
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
Moisten the cleaning cloth with the cleaning solution and apply the cloth to the
screen.
WARNING:
Please power off the unit before inserting or
removing a card or USB device.
Failure to do so may cause damage to
the card/USB and the unit.
To reduce the risk of fire or electric shock,
do not expose this appliance to rain or moisture.

3
Introduction:
Thank you for your purchase of the Photo Display NANO 8. It is designed to allow quick and
easy view of photos taken from your digital camera, mobile phone, or from a memory storage
card. Please read this User Manual carefully to learn the correct way to use the Photo Display
NANO 8.
Features:
High-contrast, bright 20.32 cm color TFT LCD
Ultra-stylish, ultra-slim: just 9.5 mm thick
Picture display in full screen, thumbnail or slide show mode with various adjustable
transition effects and time intervals
Slide show starts automatically when memory card is inserted
Clock and calendar function
User-friendly operation via the remote control included or the touch-sensitive
buttons on the frame
Display resolution: 800 x 600 pixels
4:3 aspect ratio for optimum, distortion-free display.
Package Content:
PhotoDisplay Nano 8
User Manual
Remote control
AC/DC adapter
Short USB Cable (used to connect with the USB Disk)

4
CONTENT
1. Product Overview ....................................................................................... 5
1.1 Remote Control ..................................................................................... 5
1.2 Touch Buttons ...................................................................................... 6
1.3 Right Side of Frame ............................................................................... 6
1.4 Left Side of Frame ................................................................................. 6
2. Installing & Replacing the Battery................................................................ 6
3. Getting Started.......................................................................................... 7
4. Memory Card Selection Screen...................................................................... 7
5. Main Menu ................................................................................................ 8
5.1. Slide Show .......................................................................................... 8
5.2. Photo ................................................................................................. 8
5.3. Calendar ............................................................................................. 9
6. Set up Menu.............................................................................................. 9
7. Technical Specifications............................................................................ 11
8. Troubleshooting Guide.............................................................................. 11
9. Warranty conditions ................................................................................. 11
10. Service................................................................................................. 12

5
1. Product Overview
1.1 Remote Control
1. Power = Power On/Off
2. SETUP = Go directly to Setup mode.
3. Rotate = In the photo mode, press this button, the picture will rotate 90 in
counterclockwise.
4. UP arrow = Scroll pictures in up/down mode. Also use to make menu
selections during programming and setup.
5. Zoom = In single picture mode, magnify or reduce picture display size.
6. LEFT arrow = Use for menu selections in Startup, Setup, Thumbnail, Music and
Video modes. Revert to previous page when displaying folders.
7. OK = Press to confirm selection.
8. RIGHT arrow = Use for menu selections in Startup, Setup, Thumbnail, Music
and Video modes. Advance to next page when displaying folders.
9. Slideshow = Press to start slideshow or pause when playing the picture.
10. DOWN arrow = Use for menu selection in Startup, Setup, Thumbnail, Calendar.
11. Exit = Press to return to upper page, or enter to the main menu.

6
1.2 Touch Buttons
1. Power On/Off
2. Menu
3. Up Arrow
4. Down Arrow
5. OK / Play / Pause
6. Left Arrow
7. Right Arrow
8. Exit
1.3 Right Side of Frame
1. SD/ MMC /MS card slot
1.4 Left Side of Frame
1. DC 5V (Power Input)
2. MINI USB
2. Installing & Replacing the Battery
Place the upside of the remote control down, press down on the ridged area of the battery
cover and pull towards you to remove the tray. Place one CR2025 lithium button-cell battery
on the tray with the positive “+” side facing you. Reinsert the tray.

7
3. Getting Started
Put the Photo Display NANO on stand, then plug one end of the included AC adapter
into a standard 110-240V AC electrical outlet and the other end into the right side
the frame.
Remove the protective film covering the LCD.
Remove the plastic battery insulator from the battery compartment and make sure
the remote control has a battery inside. Please refer to “Installing & Replacing
Battery” if you need a new battery.
Then the screen will display as following: If there are JPG files in the memory card or
build-in memory, the player will wait for a moment and then start the slideshow.
JOBO starting screen
4. Memory Card Selection Screen
In the Memory Card Selection Screen you can choose the source for your images. To enter
this menu press Exit twice. Using the arrow buttons “left” and “right” you can select a
memory CARD or a connected USB Disk. Press OK to confirm your selection.

8
Card Selection Screen
5. Main Menu
After you have selected the photo source you enter the main menu. Here you can choose
between Slide Show, Photo or Calendar. Using the arrow buttons “left” and “right” you can
select your choice. Press OK to confirm your selection.
Main Menu
5.1. Slide Show
Choosing this function will playback all photos from the selected source in a slide show.
Press OK to confirm and start the show.
5.2. Photo
This function allows you to preview photos in single window or in a thumbnail view of nine
images. You can also zoom and rotate images when they are shown in full screen mode.
Being in the thumbnail preview mode you can delete and copy images from the memory
source.
The thumbnail view is the first window you see after you have selected this icon. The
yellow frame around the image shows the chosen photo. On the left hand you can
see the photo information such as the name and the size.
Use the arrow buttons to select the picture you want to view in full screen. Press
Enter to confirm.

9
Thumbnail view
5.3. Calendar
The calendar function allows you to use the Photo Display NANO as a regular clock
and calendar. Your photos are shown as a slide show on the left hand side.
Using the arrow buttons you can move through the calendar.
When you want to change the clock or date, please press EXIT button to exit this
calendar Interface, then press SETUP button to enter "set time" menu.
Use EXIT button to exit calendar show.
6. Set up Menu
In the SETUP menu, you can use the arrow buttons to select one item to set up or operate.
When the item is shown in gray color, you can not deal with it at the moment.
While the photo is shown in full screen press SETUP to open the options you have to
edit the photo.

10
The following options are available:
oImage size
This function allows you to optimize the way how to display a photo.
There are 3 different ways: Auto fit, Optimal and Full
oSlideshow effect
You can choose form 16 various transition effects.
oSlide show interval
The slideshow interval gives you the opportunity to change the time
between the transistion effects. You can select between 1 to 59
seconds, 1 to 59 Minutes and 1 to 4 hours
oSplit Slide Show
Here you can split the screen in 4 parts. In each window the various
photos are shown. This function can be turned ON and OFF.
oStart Slide Show
This option starts the slide show
oRotate
You can rotate the shown photo 90, 180, 270 degree by pressing OK
oZoom
Activate this function and you have 4 zoom steps to zoom into the
photo by pressing the OK button. After the fourth step the image is in
original size again.
oSave Picture
This option save (if the unit has internal memory) the current photo
to the internal build in memory.
oDelete File
To select files in the thumbnail view press the zoom button on your
remote control. Then the image will be marked.
Then you can select the delete function and either delete one image
or all selected images.
oFormat Memory
You can format the selected memory source. But be aware ALL files on
this source will then be deleted and forever gone!
oReset Settings
This option will set the unit back to its original factory setting.
oLanguage
Here you can change the language of the user interface to either:
English, French, German or Portuguese.
oBrightness
Confirming this icon you can change the brightness of the panel with
the “right” and “left” arrows of your remote control.
oColor
Confirming this icon you can change the color of the panel with the
“right” and “left” arrows of your remote control.
oTint
Confirming this icon you can change the tint of the panel with the
“right” and “left” arrows of your remote control.
oTime
With this function you can set time and date for your frame.