JOBO PURE 8 PRO User manual

Digital Photo Frame
Pure 8 Pro
User’s Manual

i
TABLE OF CONTENTS
Introduction ..............................................................................................................................................................................................1
Declaration of Conformity..........................................................................................................................................................................2
Important Safety Precautions ....................................................................................................................................................................3
Main Features ............................................................................................................................................................................................4
Controls and Connections ..........................................................................................................................................................................5
Getting Started..........................................................................................................................................................................................6
Attaching the mount ...............................................................................................................................................................................6
Connecting to the power..........................................................................................................................................................................7
Inserting Media.......................................................................................................................................................................................8
Viewing Photos ..........................................................................................................................................................................................9
Main menu ...............................................................................................................................................................................................10
Viewing thumbnails ............................................................................................................................................................................... 11
Playing a slideshow ...............................................................................................................................................................................12
Using OSD menu....................................................................................................................................................................................12
Managing Files.........................................................................................................................................................................................13
Coping files ..........................................................................................................................................................................................13
Deleting files ........................................................................................................................................................................................14
Changing Frame Settings .........................................................................................................................................................................14
Setting items ........................................................................................................................................................................................15
Frequently Asked Questions .....................................................................................................................................................................16
Waste Management ..................................................................................................................................................................................17
Packaging .............................................................................................................................................................................................17
Disposal of WEEE (Waste Electrical and Electronic Equipment) ..................................................................................................................17
Service.....................................................................................................................................................................................................18
Specification ...........................................................................................................................................................................................18

1
Introduction
Thank you for purchasing this Digital Photo Frame.
This Digital Photo Frame is compatible with SD, SDHC, MMC and MS memory card formats, which enables you to view digital photo directly from your
camera’s memory card.
This manual contains important safety information and operation instructions, so please read all the instructions carefully before using the Digital Photo
Frame and keeps it for future reference.
We have done our best to produce a complete and accurate manual; however, we cannot ensure there are no errors or
omissions. We also have no responsibility for damages or loss of data caused by improper operation.
The instruction manual is subject to change for improvement without notice.
Trademarks and trade names used in this user’s manual are owned by their respective companies or organizations.

2
Declaration of Conformity
We declare JOBO International GmbH,
Eintrachtstr. 14,
D-51645 Gummersbach
that the “Digital Photoframe Pure 8 Pro”
complies with the following directives:
EN 55022:2006+A1 Radio interference suppression (ITE). Limits and methods of measurement
EN 55024:1998/A1 + A2 EMC Immunity to Radiated Fields (ITE)
EN61000-3-3:1995/A1+ A2 Elektromagnetic Compatibility (EMC-Part 3-3)
This declaration of EC conformity shall become null and void when the assembly is subjected to any modification that has not met with our approval.
Gummersbach, 20.September 2010 JohannesBockemühl
Geschäftsführer

3
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, product damage and
personal injury.
Warning: Do not remove the cover or back to reduce the risk of electric shock. There are no user-serviceable parts inside. Refer servicing to
qualified personnel.
Warning: Do not expose the Digital Photo Frame to rain or moisture to prevent fire or electric shock hazard.
Do not expose the Digital Photo Frame to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the
unit.
Keep the Digital Photo Frame away from direct sunlight and heat source such as radiators or stoves.
Do not block the ventilation openings. Slots and openings on the unit are provided for ventilation. The openings should never be blocked by
placing your Digital Photo Frame on a cushion, sofa or other similar surface
Do not place the Digital Photo Frame on unstable cart, stand, tripod, bracket or table. The unit may fall, resulting in possible damage or injury.
Never place heavy or sharp objects on the LCD panel or frame.
Only use the AC adapter included with Digital Photo Frame. Using any other adapter will void your warranty.
Protect the power cord from being walked on or pinched particularly at plugs, receptacles and the point where the cord attached to the Digital
Photo Frame.
Unplug the power from the outlet when the unit is not in use.
Cleaning
Before cleaning the Digital Photo Frame make sure it is turned off.
Never spray or pour liquid directly onto the screen or plastic casing.

4
To clean the LCD screen, wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. If it is still not clean, apply a
small amount of non-ammonia, non-alcohol based glass cleaner on a clean, soft, lint-free cloth to clean the screen.
To clean the plastic casing, use a soft, dry cloth. If it is still not clean, apply a small amount of non-ammonia, non-alcohol based, mildly
non-abrasive detergent on a clean, soft, lint-free cloth to clean the surface.
To clean the frame, use a soft, dry cloth.
Disclaimer: Authorized Dealer does not recommend the use of any ammonia or alcohol-based cleaners on the LCD screen or plastic casing. Some chemical
cleaners have been reported to damage the screen and/or display case. Authorized Dealer will not be liable for damage resulting from the use of any
ammonia or alcohol-based cleaners.
Main Features
8 inch Digital TFT LCD: 800*480 4:3
Decorative appearance, good quality
Displays digital photos (JPEG) without a computer
Slide show with multiple transition effects
Compatible with SD/SDHC/MMC/MS memory cards
USB Host for connecting to the USB mass storage

5
Controls and Connections
1. [M] Menu button; open OSD menu
2. []Right/Next button
3. [] Up button;
4. [] Play/Pause/Confirm button
5. [] Left/Previous button
6. [] Down button;
7. []Exit button
8. On/Off switch
9. SD/SDHC/MMC/MS card slot
10. USB HOST
11. DC Input socket
12. Mount
13. Screw hole

6
Getting Started
Attaching the mount
1. Insert the mount straight into the screw hole.
2. Twist the mount clockwise until it fix the frame.
3. After the mount has been attached, you can set the device in the landscape or portrait orientation.

7
Connecting to the power
1. Plug one end of the power adaptor into the DC socket in the Digital
Photo Frame, and the other into a wall outlet.
2. Switch the power to the ON marking position to turn on the Digital
Photo Frame.
Note:
 If it is the first time for you to switch on the unit or switch on the unit after default settings, you have to select a display language by pressing [] or
[ ] and then press [ ] , use [] or [ ] to select “Yes” or “No” and then press [ ] to confirm.
 To turn off the Digital Photo Frame completely, slide the power switch from ON to OFF.

8
Inserting Media
In order to play photos from a card or a memory stick, insert the card into its respective card slot on the Digital Photo Frame or use the USB port.
This Digital Photo Frame is compatible with the following memory cards:
• Secure Digital Card (SD) • Secure Digital High Capacity (SDHC) • Multimedia Card (MMC) • Memory Stick (MS)
Following is the method of inserting a memory card or attaching a memory stick:
1. Insert the SD/SDHC/MMC/MS card into the 3-in-1 card slot with the metallic contacts
facing towards the display.
2. Push a USB memory stick into the USB HOST slot.
Note:
 Do not use any force while inserting a memory card or attaching a memory stick.
 The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into one memory card slot.
 To remove the card or the USB memory stick, pull it out gently.

9
Viewing Photos
1 Power On/ Off
2 im Diashow-Modus im Uhrzeigersinn
3 Bewegt den Cursor nach links im Auswahlmenü oder zurück zum vorherigen
Bild im Diashow-Modus
4 MENU Aufrufen des Hauptmenüs
5 Bewegt den Cursor abwärts im Auswahlmenü oder dreht das Bild im
Diashow-Modus entgegen dem Uhrzeigersinn
6 Rücksprung zum vorherigen Foto in der Diashow oder zurück zur vorherigen
Seite im Bilder-Vorschaumenü
7 Zoom In Vergrößert einen Bildausschnitt
8 4:3/16:9 Auswahl der Bildanzeige: 4:3, 16:9
9 SETUP Aufrufen des Setup Menüs
10 OK Bestätigen der Auswahl. Start/Pause der Diashow
11 nächsten Bild im Dia Show Modus
12 OSD Anzeige des On-Screen-Displays (OSD) während der Diashow
13 Rücksprung zum vorherigen Menü
14 nächsten Seite im Bilder-Vorschaumenü
15 Start der Diashow

10
Main menu
When a memory device is inserted into the Digital Photo Frame, the corresponding icon appears on the main menu.
On the main menu, you can select connected source to view photos or change frame settings.
1. Press [M] to access the main menu. All connected source and setup icons are displayed.
SD/MMC/MS Appears when you insert a SD, SDHC, MMC or MS card.
USB Appears when you inserted a USB flash driver.
Setup To customize the settings of Digital Photo Frame.
Note:
 If you insert a memory device to the frame after switching on the frame, the Digital photo frame will start a slideshow automatically.

11
2. Press [ ] or [ ] to select a memory source, and then press [ ]. The mode menu appears. Press [ ] or [ ] to select Photo or Files.
Photo Start a slideshow or viewing photos of the memory source manually.
Files Browse all files of the memory source; and copy or delete files.
Viewing thumbnails
In Photo mode, the photos on the selected memory source can be displayed on the screen as thumbnails. Up to
15 photos are displayed at a time.
1. Select a memory source (e.g. USB, SD/SDHC/MMC/MS) on the main menu and press [ ]. The mode menu
appears.
2. Press [ ] or [ ] to select Photo, and then press[ ]. The photos are displayed on the screen as
thumbnails.
3. To navigate through the thumbnails or move to the next or previous page of thumbnails, press.[ ],
[],[ ] or [ ]

12
Playing a slideshow
Select a photo in the thumbnail view, and press[ ]. The selected photo is displayed on the screen and the slide show begins from the current photo. There
will pop up a hint for button operation.
( Note: Do not set hint time to “0” on setup menu, if you want the Digital Photo Frame to display a hint for button operation. )
Pause the slideshow and view a single photo, press [ ]. Resume the slideshow, press [ ] again.
Select previous/next photo, press [ ] or [ ].
Press [M] to open the OSD menu.
Press [ ] to exit the slideshow and view photos in thumbnail.
Using OSD menu
You also can use the OSD menu to view photos manually one by one.
1. Press [M] during viewing a photo or slideshow. The OSD menu appears on the screen and the slideshow
pauses.
2. Press [ ] or [ ] to navigate between icons on the OSD menu.
Start or resume slideshow from the current photo, highlight and press [ ], and then the
icon is changed to icon.
To zoom in a photo, highlight and press[ ] [] repeatedly to magnify a photo in the
following sequence: X2, X4, X8, X16. When a photo is magnified, press [M] again to close the OSD
menu, and then press [ ], [ ], [ ] or [ ] to view the other part of the photo.
Rotate a photo, highlight and press [ ] repeatedly.
Exit and return to previous screen, highlight and press[ ].

13
Managing Files
In the File mode, you can view all playable files and folders on the memory source. You also can copy files from
a memory device to another memory device or delete files.
1. Select a memory source (e.g. USB, SD/SDHC/MMC/MS) on the main menu and press[ ]. The mode menu
appears.
2. Press [ ] or [ ]to select Files, and press [ ]. The file list appears.
3. Press [ ] or [ ] to navigate between files and folders.
To open a folder, highlight it and press [ ]or [ ]. To return to superior directory, press [ ].
To play a file, highlight it and press[ ]. To return to file list, press[ ].
Coping files
1. Highlight a file by pressing [ ] or [ ] and then press [ ]. A check mark is displayed next to the
file.
To select more files, repeat above step.
2. Press [M]. A window with Copy,Copy all and Delete options pop up on the screen.
3. Press [ ] or [ ] to select Copy or Copy all,and press[ ]. The memory device connected to the unit
is displayed.
4. Press [ ]. [ ], [ ] or [ ] to select a memory device.
5. Press[ ] to start coping files.
Note: If your destination device does not appear in the list, the memory device should be write-protected. Please unlock and try again the operation.

14
Deleting files
1. Press [ ] or [ ] to select Delete in the pop-up window, and then press[ ].
2. Press [ ] or [ ] to select “Yes” or “No” to delete files or exit without deleting.
3. Press[ ]to confirm.
Changing Frame Settings
The system settings let you customize and configure your Digital Photo Frame. Select the Setup icon on the
main menu and press [ ]. The Setup Menu appears on the screen.
1. To select photo and general setup, press [ ] or [ ]and then press [ ].
2. To select a setting item, press [ ] or [ ] and then press [ ].
3. To change the value, press [ ] or [ ] and then press [ ]. Or press [ ] to exit.
4. Press [M] to return to the main menu.

15
Setting items
Setting Items Description
Sliding show time Set up the interval time for slideshow.
The available options include: 3s, 5s, 15s, 1 min, 15mins.
Photo Mode Set photos to Full Screen or Standard Screen when you are viewing them.
Transition Effect Set up the style of transition while playing a slide show.
Date Stamp Display the detail information of photos when you are viewing them.
Photo
Shuffle To play photos in a random order or in order while playing a slideshow.
Language Set up the language of the OSD menu.
Brightness Adjust the brightness of the screen.
The available options include: +3, +2, +1, 0, -1, -2, -3.
Contrast Adjust the contrast of the screen.
The available options include: +3, +2, +1, 0, -1, -2, -3.
Saturation Adjust the saturation of the screen.
The available options include: +3, +2, +1, 0, -1, -2, -3.
Auto run Set the Digital Photo Frame to run a specified mode automatically when you switch on it.
Hint time Set how long to display the hint for button operation while playing a slideshow.
The available options include: 0s, 5s, 10s, 20s.
General Setup
Default Reset all settings to the default settings.

16
Frequently Asked Questions
1. Why cannot the Digital Photo Frame display some files from my Flash card or USB device?
• Some unpopular memory cards are not compatible with the device. Use a card which matches with the Digital Photo Frame.
• The file formats on your card or USB device might not be supported (only JPEG photos are accessible). Provide files with the supported JPEG.
2. There is a memory card inserted in the Digital Photo Frame, but the device is not able to read the card. What can I do?
• First, make sure that you are using a memory card type that is supported by the Digital Photo Frame.
• Secondly, make sure that the memory card is inserted correctly.
• Thirdly, check if the file formats on your card are supported or not by the frame (only JPEG photos are accessible). Provide files with the supported
JPEG.
Note: Some digital cameras save images into non-standard formats. Please refer to the operating manual of your camera for specifics.
3. Why do some photos load faster than others?
• Higher resolution photos load slower. Use photos with lower resolution to speed up the loading time.
Note: The Digital Photo Frame supports up to 8000*8000 pixels photo display.
4. Why does the screen not show anything?
• The device might not have been turned ON or the adapter is not well connected.
5. Can I rotate a photo on the screen?
• YES. Press [M] to open OSD menu while viewing photos, and then use[ ] or [ ]to select and press[ ]to rotate a photo.
Note: The rotated photo will return to its original orientation after you power off the Digital Photo Frame.
6. What is the best photo resolution displayed on the screen?
• The best resolution is 800*480 and the max photo resolution of this Digital Photo Frame is 8000*8000 pixels.

17
Waste Management
Packaging
To avoid damage and pollution of the product the Photoframe will be delivered within a packaging. Zum Schutz vor Schäden wird das
Gerät in einer Transportverpackung ausgeliefert. These Packaging can be recycled.
Disposal of WEEE (Waste Electrical and Electronic Equipment)
Devices marked with the WEEE logo are subject to the European Community Directive 2002/96/EC.
Waste Electrical and Electronic Equipment must be separated from household rubbish and disposed at sites that collect WEEE.
By orderly disposing WEEE you will avoid damage caused to the environment.


Service: To guarantee a product always at the best standard this manual as well as the product itself are subject to alterations.

18
Service
Within the uncommon situation of failures further Information for Service can found at the Homepage www.jobo.com
Specification
Display
Digital LCD, TFT
Panel size: 8” (20,3cm)
Screen aspect ratio: 4:3
Resolution: 800*480 pixels
I/O DC in
Power Supply AC Adapter (Input: 100~240V AC, 50~60Hz; Output: DC 5V 1A)
USB port USB Host 2.0 (High Speed)
Supported peripheral devices SD™ (Secure Digital Card), SDHC™, MMC™ (MultiMedia Card), MS™ (Memory Stick) ,
Supported photo format JPEG, Maximum resolution: 8000*8000 pixels
Storage condition Humidity<90%,-20~60°C
Working condition Humidity <80%,0~45°C
Size L*W*H: (mm) 222*181.5*22mm
Weight (g) 373g