JobSmart 3951103 Quick reference guide

3951103
Abrasive Blast Cabinet
Assembly & Operating Instructions
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual provides important information on proper operation and maintenance. Every effort has been
made to ensure the accuracy of this manual. We reserve the right to change this product at any time
without prior notice.
STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER.
Questions? Problems? CONTACT CUSTOMER SERVICE.
If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com
or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales
receipt is required.

3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions
2
TABLE OF CONTENTS
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS.................................................................2
SERVICE...............................................................................................................................................5
SPECIFIC SAFETY RULES AND/OR SYMBOLS ................................................................................5
PACKAGE CONTENTS ........................................................................................................................6
COMPONENTS.....................................................................................................................................6
ASSEMBLY ...........................................................................................................................................6
OPERATION .........................................................................................................................................6
MAINTENANCE ....................................................................................................................................7
PARTS DIAGRAM.................................................................................................................................7
PARTS LIST..........................................................................................................................................8
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
What You Need to Know About Safety Instructions
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible
conditions and situations that may occur. Common sense, caution and care must be exercised when
assembling or using this product.
Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you
do not understand.
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.

3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions
3
GENERAL PRODUCT SPECIFICATIONS
FEATURES:
• Abrasive Blast Cabinet
• 4 Assorted Ceramic Nozzle
• Rubber Gloves
• Blasting Gun With Trigger
• Dust Collector Port
• Hopper & Screen
SPECIFICATIONS
• Tank Volume 32 Lb Max Capacity
• Working Pressure 40-80 PSI
• Air Consumption 5 CFM
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
When unpacking, check to make sure all parts listed are included. If any parts are missing or broken,
please call Customer Service at 1-888-287-6981.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE
IMPORTANT SAFETY RULES
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.

3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions
4
Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause
accidents or injury.
Do not operate the abrasive blaster in explosive areas, such as in the presence of flammable
liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
Keep bystanders, children and visitors away while operating the abrasive blaster.Distractions can
cause you to lose control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and
safer at the rate for which it is designed.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
Always check to make sure that the power switch is turned off before connecting blaster to power
source. Tool may cause damage to property or person if plugged in while power switch is on.
All work areas should be clean and well lit. Accidents can occur in poorly lit and cluttered areas.
Keep children, and other distractions at a distance while operating the Blast Cabinet.
Use common sense while operating this abrasive blast cabinet.
Do not use this tool if you are:
•Feeling tired or are under the influence of alcohol or drugs.
•Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
•Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
•When using this blast cabinet, always:
•Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
•Check that the power switch is in the “OFF” position before plugging the unit into an electrical outlet.
Use the correct tool for the job. Using the correct tool is safer and faster.
Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.
Check to be sure all moving parts are free from binding and are properly aligned.
Use only accessories that are recommended by the manufacturer for your tool model.
Safety glasses and ear protection must be worn during operation.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified
personnel could result in a risk of injury.

3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions
5
When servicing a tool, use only identical replacement parts and follow instructions in the manual. Use
of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this product.
Before use, read carefully and understand all warnings, cautions, instructions and labels. Failure to do so could
result in serious personal injury, property damage or even death.
IMPORTANT SAFETY INSTRUCTIONS
Before using this tool, you need to become familiar with its operation. If you are unsure about the
operation of the tool, or have any questions about its proper use, call the Customer Service Department
at 1-888-287-6981. Follow these instructions for safe handling of the tool:
•Close and latch the door before operating the Blast Cabinet.
•Check for damaged parts before use. Do not operate the Blast Cabinet if there are damaged parts.
•Maintain proper footing. Make sure you have secure footing and balance.
•Clean spills and sand abrasive in the work area.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
SYMBOLS
The following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.
Symbol
Name
Description
V
Volts
Voltage (Potential)
A
Amperes
Current
Hz
Hertz
Frequency (Cycles per Second)
W
Watt
Power
Kg
Kilograms
Weight
Alternating Current
Type of Current
Direct Current
Type of Current
Alternating or Direct Current
Type of Current
Earthing Terminal
Grounding Terminal
Class II Construction
Denotes Double Insulation
min
Minutes
Time
s
Seconds
Time
Diameter
Size of Drill Bits, Grinding Wheels, etc.
No Load Speed
No-load Rotational Speed
…/min
Revolutions per Minute
Revolutions, Surface Speed, Strokes, etc. per Minute
1,2,3…
Ring Selector Settings
Speed, Torque or Position Settings

3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions
6
PACKAGE CONTENTS
• Abrasive Blast Cabinet
• 4 Assorted Ceramic Nozzle
• Rubber Gloves
• Blasting Gun With Trigger
• Dust Collector Port
• Hopper & Screen
COMPONENTS
ASSEMBLY
Be certain the Blast Cabinet is not connected to a power source before assembly. Plug the Blast
Cabinet into a power source only when assembly is complete.
Refer to the Parts Diagram and Parts List to assist with assembly.
1. Peel the thin plastic overlay off of the glass lens.
2. Remove any protective backing that is found on the cabinet or on the door or other part.
3. Attach Air Hose to the Air Tube to the Blast Gun. Place the air hose inside the Cabinet with the long
end facing to the back.
4. Attach the Air Hose to the connect Air Hose.
OPERATION
Always wear your hood, dust mask and heavy duty canvas gloves when operating the
abrasive blaster.
Before operating your abrasive blaster, inspect each connection, double checking to make
sure that all are tight and properly sealed.
THIS MACHINE IS NOT INTENDED FOR USE WITH SILICA BASED ABRASIVES. SILICA BASED
ABRASIVES HAVE BEEN LINKED TO SEVERE RESPIRATORY DISEASE. ALWAYS USE SILICA
SUBSTITUTES WHEN ABRASIVE BLASTING!
Open the Blast Cabinet Window and fill the cabinet with fine abrasive material. Use about 10 pounds.
The Sand will feed from the air tube. The air hose is attached to the base of the gun. Connect the air
compressor. Set the compressor pressure regulator to 80 PSI. Do not exceed 80 PSI.
Open the cabinet window and place the work piece in the center. Close the window securely.
1. Blast Cabinet
2. Glove Port
3. Power Switch
4. Window
5. Window Lift Knob
6. Lid Swivel Clamp
5
6
1
2
3
4

3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions
7
Insert your hands into the gloves. Be certain your fingers are properly positioned and you can move your
hands easily and grip the work piece comfortably.
Point the nozzle and operate the gun to be certain that the blaster is working correctly. Make certain there
is no leaks.
Hold the work piece, and position your fingers so that the glove is not in the way of the work piece. Reposition
the work piece as needed in order to access the complete surface area.
Use a circular motion or side-to-side motion, and the nozzle should be 2 inches away from the work piece.
Once the work piece is completed, remove your hands from the gloves and turn the blaster and compressor off.
Dirt and water in the air supply are major causes of pneumatic tool wear. Use a filter/oiler for better performance
and longer life of the tool. The filler must have adequate flow capacity of r the specific application.
MAINTENANCE
Keep your abrasive blaster clean, and protect it from damage.
Check for damaged parts before and after use. Replace any parts which appear worn. Call customer service
for replacement parts if needed.
PARTS DIAGRAM
PARTS LIST
Part # Description
SBC901 Grid
SBC902 Fluorescent Tube 12V
SBC903 End Connector
SBC904 Plastic Cover
SBC905 Input Cable Assembly
SBC906 Cable Gland Assembly
SBC907 Power Cable Assembly

COS14 14 Inch Cut Off Saw Assembly & Operating Instructions 8
SBC908 Main Filter
SBC909 Secondary Filter
SBC9010 Retaining disc
SBC9011 Rubber Gloves (pair)
SBC9012 Worm Drive Clip
SBC9013 Clear Plastic Lid
SBC9014 Knob
SBC9015 Lid Retaining Chain
SBC9016 Replaceable Plastic Window
SBC9017 Window Retaining Strip
SBC9018 Lid Hinge
SBC9019 Fluorescent Tube Clip
SBC9020 Air Vent Foam Packing
SBC9021 Lid Swivel Clamp
SBC9022 Cable Transformer Box
SBC9023 Cabinet Only (w/out lid)
SBC9024 Nozzle adapter nut
SBC9025 Abrasive Nozzle 4mm
SBC9026 Abrasive Nozzle 5mm
SBC9027 Abrasive Nozzle 6mm
SBC9028 Abrasive Nozzle 7mm
SBC9029 Abrasive gun
SBC9030 Air Hose Adapter
SBC9031 Worm Drive Clip Diameter 10
SBC9032 Air Hose
SBC9033 Flat Washer
SBC9034 Air Adapter Nut
SBC9035 Clamp
SBC9036 Abrasive Intake Hose
(3951103201604)