Johannus Ecclesia T-25 User manual

JOHANNUS
the revolution
User Manual
The church organ without compromise
JOH_Manual A4 ECCLESIA.indd 1 14-04-10 13:54

Ecclesia T-25
Ecclesia T-25
the JOHANNUS revolution
.
© 2010, Johannus Orgelbouw b.v.
All rights reserved. Nothing in this publication may be reproduced, stored in a computerised data
file or made public in any form or in any way either electronically, mechanically, by way of
photocopying, recording or in any other manner without prior written permission from Johannus
Orgelbouw b.v.
Manufacturer
Johannus Orgelbouw b.v
Address
Keplerlaan 2
6716 BS EDE
Country
The Netherlands
Telephone
[phone]
Fax
[phone]
E-mail
[e-mail]
Website
www.johannus.com
Version
1.0
Date
June 2010

Table of contents
Table of contents - 1 -
the JOHANNUS revolution
Safety
Safety precautions
Symbols on the organ
Symbols in the manual
1
1
1
Installation

Installation and connection
Switching on
Transport and storage
Opening and closing the rolltop cover
1
1
1
1
Description of the Organ
Overview of the main components
Overview of display
Overview of controls
Connect and switch on the peripherals

External connections
1
1
2
3
3
Operation
Volume Controls
Expression pedals
Adaptive Surround Reverb
Intonations
Factory intonation settings
Orchestrals
Stops
Couplers
Accessories
Change the registration
Pre-programmed memory locations
Capture memory
Transposer
General Crescendo
1
1
1
2
2
3
3
4
4
5
5
5
6
6
Easy Menu
Orchestrals
MIDI
Tuning
Temperaments
Keyboard Config
Reset Procedures
Datadump
Startup settings
Reverb
Key Volumes
1
2
2
2
3
4
4
5
5
5

Table of contents
Table of contents - 2 -
the JOHANNUS revolution
Maintenance
Overview
Cabinet maintenance
Maintenance of the manuals
Problems
Reposition the pedal
Warranty
1
1
1
1
2
2
MIDI Implementations

MIDI Implementation Chart
MIDI specifications
1
2

Safety
Safety - 1 -
the JOHANNUS revolution
SAFETY
Safety precautions
Place the organ on a stable, horizontal surface.
Connect the organ to an electrical outlet with an earth connection.
Switch the organ off when it is not in use.
Do not place the organ in a damp area.
Do not expose the organ to liquids.
Follow the instructions and precautionary measures in this user manual.
Keep this user manual with the organ.
The organ may only be opened by a technician authorised by Johannus Orgelbouw b.v.
The organ contains static-sensitive components.
The warranty becomes null and void if the organ is opened by a non-authorised person
Symbols on the organ
Warning
Warning for electric shock
Warning for static-sensitive components
Symbols in the manual
Warning or important information
Note

Installation
Installation - 1 -
the JOHANNUS revolution
Installation and connection
1. Position the organ on a stable, horizontal
surface.
2. Lean the organ slightly backward.
3. Slide the pedal (A) against the pedalboard of
the organ (B).
4. Set the organ upright.
5. Place the music desk (C) using the music desk
supports in both holes in the stop panel.
6. Place the organ bench over the pedal.
7. Make sure the voltage of the organ matches
the voltage of the mains.
See the serial plate (D).
8. Connect the organ to an earthed power socket.
Switching on
Switch on the organ with the on/off key switch on the
right next to the manuals.
Wait several seconds. Starting the control functions and the settings will take some time.
The lamps of the SET and 0 piston light up and the settings appear on the display.
Transport and storage
Pay attention to the following during transport and storage:
Remove the music desk and the pedalboard from the organ.
Relative humidity within the storage area: 10 to 90%.
Opening and closing the rolltop cover
The organ can be closed with a wooden rolltop cover that has a lock. The rolltop cover lock is
behind the music desk.
Opening
1. Put the appropriate key in the rolltop cover lock.
2. Turn the key a quarter turn to the left. The lock now rises out of the rolltop.
3. Slide the rolltop cover upward.
Closing
Never leave the key in the area that can be closed.
1. Slide the rolltop cover downward.
2. Press the rolltop cover lock in.
3. Turn the key a quarter turn to the right.

Description of the Organ
Desciption of the organ - 1 -
the JOHANNUS revolution
Overview of the main components
A Music desk
B Music desk
C General Crescendo pedal
D Swell shoes
E Organ bench
F Pedal
Overview of display
A Product name
B Volume
C Selected memory bank
D Tuning setting
E Transposer setting
F Temperament setting
G Crescendo setting
H Swells indicators

Description of the Organ
Desciption of the organ - 2 -
the JOHANNUS revolution
Overview of controls
A
Pedal stops
K
Intonations
B Great stops L Accessories
C
Display
M
Pre-programmed memory locations
D Roltop N Memory bank generals
E
Rolltop cover lock.
O
MENU piston
F Great stops P SET piston
G
Swell stops
Q
Memory lock
H
Manual swell
R
Reverb length knob
I Manual great S Reverb volume knob
J
On/Off switch

Description of the Organ
Desciption of the organ - 3 -
the JOHANNUS revolution
Connect and switch on the peripherals
You can connect accessories (for example, a MIDI device) to the organ.
Follow the instructions provided in the documentation for the accessory.
1. Switch off the organ and the accessory.
2. Connect the accessory to the organ.
3. Switch the accessory on.
4. Switch on the organ
External connections
The external connections are on the left under the console.
MIDI IN: This is an input for receiving MIDI codes from other devices.
MIDI MOD.: This is a programmable MIDI output for connecting a module or expander,
for example.
MIDI SEQ.: This is a non-programmable MIDI output for connecting a sequencer or PC
(with the optional Johannus Intonat program), for example.
AUX IN: This is a (stereo) input for playing the sound of an external device through the
amplifiers of the organ. For example, an expander connected to the organ through the
MIDI MOD. can be played through the instrument's loudspeakers.
The volume of the device that is connected through the AUX IN cannot be
adjusted with the general volume or the swell shoes. However, this is possible
when the volume setting of the external device is controlled by means of MIDI
codes through the MIDI MOD. connection of the instrument.
AUX OUT: This is an output for connecting an external (stereo) amplifier.
EXT. REV.: This is an output for connecting Johannus external acoustics. This is a
system that imitates the spatial effect of a concert hall or cathedral.
Do not use these outputs for other purposes.
PHONES: This connection for a (stereo) headphone is suited for a headphone with an
impedance of 30 Ω or more (see headphone specifications).
When the headphone is used, the internal and/or external loudspeakers of the organ
are switched off automatically.

Operation
Operation - 1 -
the
JOHANNUS
revolution
Volume Controls
Organ: You can adjust the overall volume of the organ with the ORGAN VOLUME
control.
Acoustics: The acoustics volume can be continuously adjusted using the ACOUSTICS
VOL. control.
Expression pedals
Expression pedals control the volume of Great/Pedal, the Swell and the Choir.
Adaptive Surround Reverb
Adaptive Surround Reverb offers you the possibility of choosing your own acoustic
environment. You have a choice of no less than 12 uni- que reverbs, allowing you to choose a
different reverb for each style and
intonation. Your organ comes with the following standard settings:
Romantic Town Church
SymfonicBasilica
Baroque Palace Hall
Historic Hill Church
Other reverb options:
Concert Hall
Music Room
City Cathedral
Abbey Church
Royal Auditorium
Marble Church
Village Chapel
Marble Room
When changing style and/or intonation, the chosen style, intonation and reverb will be shown
briefly on the display.
Volume
Turn the VOLUME knob to change the volume of the reverb.
Length
Turn the LENGTH knob to change the length of the reverb. The length can be set per reverb. For
each reverb the last setting is saved.
Reverb
You can choose from 12 different reverbs. You can alter these per style and intonation.
1. Use the ROM, SYM, BAR (Style), SOLO and TRIO (intonation) knobs to activate the
style and intonation you wish to change the reverb for.
2. Press the MENU button.
3. Use the + and – buttons to obtain the desired reverb.
4. Push the SET button. The selected reverb has now been stored in memory. The ‘3D
Surround On/Off’ option will now appear on the display.
5. Use the + and – buttons to turn the 3D Surround on or off.
6. Press the SET knob. The selected 3D Surround setting has now been stored in memory
and will automatically appear in the main menu.
7. Press the MENU button to leave the Easy Menu.