Johnson Controls Unisab III User manual

Unisab III panel mounting kit
Fig. 1
•Unisab III display mounted on a pan-
el door
• Complete kit:
Johnson Controls part no.: 1571-115
Fig. 2
•Unisab III controller mounted inside
the panel with vibration dampers on
the panel mounting plate.
Unisab III panel mounting kit
Mounting instruction - Unisab III
006093 - en 2009.02. 1/6

Parts overview
1
4
3
5
2
Fig. 3
1. Controller mounted on a frame
2. Vibration dampers
3. Connecters
4. Ground and support rail
5. Screws and washers for ground rail
Fig. 4
• Unisab III display
•Display cable (200 cm) for Unisab III
is connected to the front.
Fig. 5
• Jumper set for the controller.
Unisab III panel mounting kit
2/6 Mounting instruction - Unisab III
006093 - en 2009.02.

Mounting the Unisab III controller frame and the ground rail to the panel
mounting plate
253 mm
250 mm
126.5 mm
Fig. 6
Distance between fixing points
Unisab III panel mounting kit
Mounting instruction - Unisab III
006093 - en 2009.02. 3/6

Cut-out and fixing points for mounting of Unisab III display in a panel door
Fig. 7
Fig. 8
• Minimum 40 mm free space for removal of SD-card.
Unisab III panel mounting kit
4/6 Mounting instruction - Unisab III
006093 - en 2009.02.

Mounting of vibration dampers
Fig. 9
•Connect the ground rail with the con-
troller frame using the vibration
dampers
•For each vibration damper, use one
M6x8 screw torx, one M6 lock washer
and one M6 nut
•Use a screwdriver torx T30 and a
spanner no. 10 to fasten the vibration
damper
Fig. 10
•The upper part of the controller frame
is connected to the panel mounting
plate also using vibration dampers.
Unisab III panel mounting kit
Mounting instruction - Unisab III
006093 - en 2009.02. 5/6

Cable mounting on the ground rail
Fig. 11
•Ground wire connected to the ground
rail.
Fig. 12
•Cable screen must be connected to
the ground rail
•Cable screen must be as short as pos-
sible
•Cable screen must be connected
within a distance of 100 mm from the
controller.
Unisab III panel mounting kit
6/6 Mounting instruction - Unisab III
006093 - en 2009.02.