Johnson Plastics Plus SNW-RW User manual

Jan-22
Laserable Silicone Sleeve
LASERABLE SILICONE SLEEVE - Laser Engraving
SNW-RW | SNW-LBW | SNW-NBW | SNW-BW | SNW-PW
GENERAL LASER ENGRAVING PROCESS
Recommended Equipment & Accessories
•CO2 Laser Engraver
•Clean Towel
•Soap and water
•Tape to hold sleeve flat on laser bed

Jan-22
Recommended Settings- Laser Engraving
50-60W lasers
Laser Power
30-40%
Laser Speed
75-80%
Resolution (DPI/PPI)
500-600
General Laser Engraving Instructions
•Place the silicone sleeve onto the laser bed and align to the zero point on the laser bed.
oOptional: Utilize a jig to help position and hold the silicone sleeve flat on the laser bed.
oIf jig is not available, use tape to help hold the silicone sleeves flat on the laser bed.
•Adjust the laser focus to the surface of the silicone sleeve.
•Once the artwork is positioned, engrave using the suggested starting settings.
oSettings may need adjusted depending on the laser tube wattage.
•When finished, remove the silicone sleeve from the laser bed.
•If cleanup is needed, wash the surface of the silicone sleeve with soap and water.
Tips and Tricks
•To help with artwork placement, utilize the product template for this item, found on the
item's product page on jpplus.com/..
Troubleshooting
•The engraved area is charring/melting.
oLaser power setting and/or resolution may need to be decreased.
oLaser speed setting may need to be increased.
•The engraving is fading on the edges of the graphic.
oThe laser focus may need to be adjusted or calibrated to ensure the laser is focusing properly to
the silicone sleeve surface.
oAdditional tape or the use of a custom jig may be needed to help ensure the silicone sleeve is
held as flat as possible to the laser bed. The silicone sleeve must be flat to ensure the laser is
properly focused to the silicone sleeve surface.
Templates and Images
•Visit jpplus.com to find the product page for this item. The product template may be found under the
Tech Docs and Downloads area of the page.

Jan-22
To order more of this product, see similar products and much more, please visit jpplus.com.
For additional product support and troubleshooting, please contact JPPlus Advanced Support Team:
•Phone: [phone]
•Email: [e-mail]
•Schedule an appointment: https://jpplusadvancedsupport.setmore.com/