Johnson 8210 User manual

www.spacetv.co.zaHelpline: 0861 40 41 42
Live
streaming
made easy
8210 HDMI Streamer
User Manual

HELPLINE 0861 40 41 42 • www.spacetv.co.za
2
1. PRODUCT DESCRIPTION 3
2. HDMI STREAMER APPLICATIONS 4
3. INSTALLATION OF THE HDMI STREAMER 5
4. TECHNICAL SPECIFICATIONS 9
5. SAFETY INSTRUCTIONS 10
6. CONDITIONS OF WARRANTY 11
CONTENTS:
No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission.
Space Television reserves the right to change the specications of the hardware and software described in these manuals at any time.
Space Television cannot be held liable for any damages resulting from the use of this product. Specications are subject to change without notice.
© Space Television - 78 Republic Road, Ferndale, Randburg, Johannesburg, 2125
PO Box 9317, Johannesburg 2000
T 0861 40 41 42
email sales@spacetv.co.za
www.spacetv.co.za
8210 HDMI Streamer
User Manual

HELPLINE 0861 40 41 42 • www.spacetv.co.za 3
1. PRODUCT DESCRIPTION
Put an HDMI stream on your (local) network
• The Johansson HDMI Streamer is designed for small to medium-sized projects
• It is a High Denition Video and Audio Encoder that makes it easy to stream an HDMI source on a
(local) network and/or internet
• This gives the end-user the exibility to see your real-time video content on their preferred device,
such as: Mobile Phone, Tablet PC, laptop or Web Enabled Smart TV
• On a local LAN, the end-user can simply surf to a dedicated webpage to watch the live stream there
is no need to install a mobile application or additional software, it works on any web browser, this can
be used for surveillance cams, digital signage, advertisements, info channel, creating your own local
broadcast, etc
• Users who want to stream content live via the web can do so by making use of the 8210 HDMi
stream in combination with live platforms (e.g. Facebook Live, YouTube Live, Ustream, Wowza, etc).
The 8210 has multiple functionalities:
• Enable a HDMI source on your local network using the built-in webpage (HLS unicast)
• Multicast a HDMI source for an IPTV application (UDP multicast)
• Publish your live stream to an online platform (RTMP)
• HDMI loop-through for simultaneous viewing on a local TV
8210 HDMI Streamer
User Manual

HELPLINE 0861 40 41 42 • www.spacetv.co.za
4
2. HDMI STREAMER APPLICATIONS
8210 HDMI Streamer
User Manual
no
licenced
apps
required
HDMI
WAN
LAPTOP/PC
HDMI DEVICE
MOBILE
VIDEO
SET TOP BOX
8210
HDMI
Streamer
CCTV CAMERA WEB CAM
SMART TV
LAPTOP/PC
LAN

HELPLINE 0861 40 41 42 • www.spacetv.co.za 5
3. INSTALLATION
8210 HDMI Streamer
User Manual
3.1. Minimal system requirements:
The following web browsers support the module interface: Chrome; Safari; Firefox; Internet Explorer.
When using a different browser, we cannot guarantee a correct functioning of the interface.
3.1. Minimal system requirements:
The following web browsers support the module interface: Chrome; Safari; Firefox; Internet Explorer.
When using a different browser, we cannot guarantee a correct functioning of the interface.
• After powering the HDMI Streamer, wait until the power led turns green (this can take up to about 2
minutes). Once the power led is green, the unit can be accessed through the WebGUI. The unit uses
192.168.50.50 as the default static IP address. Therefore, you will need to set-up a static IP in your
PC that matches the subnet of the device. For example 192.168.50.25.
Windows 7
Go to start >> Control Panel >> Network and
Internet >> Network and Sharing Center >>
Change Adapter Settings.
Right-click on “Local Area Connection” and then
on “Properties”.
Windows 8
Open the windows 8 start screen by pressing
the start button. Type “Control Panel” and
press enter. Then go to “Network and Internet”
>> “Network and Sharing Center” >> “Change
Adapter Settings”. Right-click on “Local Area
Connection” and then on “Properties”.
Double click on “Internet Protocol Version 4
(TCP/IPv4)” to enter the IP settings of your
adaptor.

HELPLINE 0861 40 41 42 • www.spacetv.co.za
6
3. INSTALLATION cont.
8210 HDMI Streamer
User Manual
Check the button “Use the following IP address”
and enter an IP and subnet mask.
You can leave the Default gateway and DNS
settings empty.
Open your browser and surf to the website http://192.168.50.50. If everything went ne you will see the
following webpage, if not check your network settings and try again.
Alternatively, the webpage can default also be accessed via http://start but also in this case your PC
needs to be in the same subnet.

HELPLINE 0861 40 41 42 • www.spacetv.co.za 7
3. INSTALLATION cont.
8210 HDMI Streamer
User Manual
1. To log in to the device: connect the HDMI Streamer to a local network and go to
http://192.168.50.50/admin/
2. Device: The following screen with general information will appear:
3. Inputs: Dene the encoder settings for the HDMI input

HELPLINE 0861 40 41 42 • www.spacetv.co.za
8
3. INSTALLATION cont.
8210 HDMI Streamer
User Manual
4. Outputs: Select multicast transport protocol: RTP or UDP
For live streaming, enable the service and dene the RTMP address:
RTMP address: URL + private key
e.g. youtube: rtmp://a.rtmp.youtube.com/live2/qxjd-uaps-zfk6-550v
To add multiple Hosts (streams), add the IP adresses (from the same network) and separate with a
comma (e.g. 192.168.50.51,192.168.50.52, 192.168.50.53).
Make sure the IP addresses are in the same network.
5. End-user page: Select Live Streams in admin menu or go to http://192.168.50.50
Factory reset:
Go to Device > Factory reset, or press the small button next to the DC input on the HDMI Streamer for 5
seconds. When the HDMI Streamer is resetting, the power LED will blink.

HELPLINE 0861 40 41 42 • www.spacetv.co.za 9
4. TECHNICAL SPECIFICATIONS
8210 HDMI Streamer
User Manual
PARAMETER VALUE
Inputs 1 x HDMI
Outputs 1x IP Ethernet RJ-45 jack (for streaming + WebGUI)
1 x HDMI (loop-through)
HDMI input
Video resolution : 576i up to 1080p
Video encoding : H264/AVC
Video bitrate Encoding: from 1 Mbps to 30Mbps
Audio encoding : AAC/MPEG2
Audio bitrate Encoding 32 -192 Kbps
Streaming port 10/100 Mbps
Ethernet OTT encapsulation HLS (Apple HTTP Live Streaming) (unicast)
Ethernet multicasting Possible to output UDP multicast
Simultaneous users Up to 30 (depending on the bitrate and the network infrastructure)
Input resolution Up to 1080p60
Supported playback All HTML 5 browsers on Android/iPhone/Mac/PC/SmartTV/etc.
No need to install mobile application or additional software
Conguration Network/login/input encoder settings/output multicast settings
Power consumption 5 W
Operating temp. 0°C to +50°C (for indoor use only)
Dimensions 155 x 120 x 50 mm
Weight 0.6 Kg

HELPLINE 0861 40 41 42 • www.spacetv.co.za
10
5. SAFETY INSTRUCTIONS
8210 HDMI Streamer
User Manual
To prevent re, short circuit or shock hazard:
• Do not expose the unit to rain or moisture.
• Install the unit in a dry location without inltration or condensation of water.
• Do not expose it to dripping or splashing.
• Do not place objects lled with liquids, such as vases, on the apparatus.
• If any liquid should accidentally fall into the cabinet, disconnect the power plug.
To avoid any risk of overheating:
• Install the unit in a well aery location and keep a minimum distance of 15 cm around the
apparatus for sucient ventilation
• Do not place any items such as newspapers, table-cloths, curtains, on the unit that might
cover the ventilation holes.
• Do not place any naked ame sources, such as lighted candles, on the apparatus
• Do not install the product in a dusty place
• Use the apparatus only in moderate climates (not in tropical climates)
• Respect the minimum and maximum temperature specications
To avoid any risk of electrical shocks:
• Connect apparatus only to socket with protective earth connection.
• The mains plug shall remain readily operable
• Pull out power plug to make the different connections of cables
• To avoid electrical shock, do not open the housing of adapter.
Only use a dry soft cloth to clean the cabinet.
Do not use solvent
For repairing and servicing refer to qualied personnel.
Read these instructions carefully before connecting the unit
Maintenance
Dispose according your local authority’s recycling processes

HELPLINE 0861 40 41 42 • www.spacetv.co.za 11
6. CONDITIONS OF WARRANTY
Space Television warrants the product as being free from defects in material and workmanship for a
period of 12 months starting from the date of purchase indicated on it. See note below.
If during this period of warranty the product proves defective, under normal use, due to defective
materials or workmanship, Space Television, at its sole option, will repair or replace the product. Return
the product to your local dealer for reparation.
THE WARRANTY IS APPLIED ONLY FOR DEFECTS IN MATERIAL AND
WORKMANSHIP AND DOES NOT COVER DAMAGE RESULTING FROM:
• Misuse or use of the product out of its specications.
• Installation or use in a manner inconsistent with the technical or safety standards in force in the
country where the product is used
• Use of non-suitable accessories (power supply, adapters...).
• Installation in a defect system.
• External cause beyond the control of Space Television such as drop, accidents, lightning, water, re,
improper ventilation.
THE WARRANTY IS NOT APPLIED IF:
• Production date or serial number on the product is illegible, altered, deleted or removed.
• The product has been opened or repaired by a non-authorized person.
8210 HDMI Streamer
User Manual

www.spacetv.co.za
Helpline: 0861 40 41 42
Table of contents