JONATHAN ADLER Delphine Desk User manual

JONATHAN ADLER ENTERPRISES﹒333 HUDSON STREET 7TH FLOOR NY, NY 10013﹒T.212.645.2802 F.212.645.3072 ﹒jonathanadler.com
Delphine Desk
Assembly Instruction
For easy assembly two people are recommended.
Parts Included: Hardware Included:
Desk Top (A) –1pc
Left Frame (B1)—1pc Right Frame (B2)—1pc
Cross Bar (C)—1pc
Metal Handle (D)—1pc

JONATHAN ADLER ENTERPRISES﹒333 HUDSON STREET 7TH FLOOR NY, NY 10013﹒T.212.645.2802 F.212.645.3072 ﹒jonathanadler.com
Step 1
Remove all components from the box, and place the Desk Top (A) upside
down on a carpeted or scratch-free surface. Insert the left side frame (B1)
to the holes of Desk Top (A). Then insert the cross bar(C) to the left side
frame and fully tighten with bolt (F) and Washer (I).
Step 2
Insert the right side frame (B2) to the Right holes on Desk Top (A) and
Cross Bar(C), and fully tighten with Bolt (F) and Washer (I).

JONATHAN ADLER ENTERPRISES﹒333 HUDSON STREET 7TH FLOOR NY, NY 10013﹒T.212.645.2802 F.212.645.3072 ﹒jonathanadler.com
Step 3
Fix the top of side frame (B) to the both sides of Desk Top (A) with Bolts
(G) and Washer (I).
Step 4
Stand the Desk upright to level the four levelers.

JONATHAN ADLER ENTERPRISES﹒333 HUDSON STREET 7TH FLOOR NY, NY 10013﹒T.212.645.2802 F.212.645.3072 ﹒jonathanadler.com
Step 5
Place the Metal Handle (D) in correct position in the front of the drawer,
then use the screw driver(not included) to tighten the screw(E) through
the metal flower center point and fix the handle(E).
Ensure all bolts are fully tightened every three months to ensure stability.