JONATHAN ADLER Jacques Console Table User manual

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
F URNIT URE
Jacques Console Table
Assembly Instruction
•For ease of assembly two people are recommended.
Parts Included:
Box 1:
•(1pc) Left Side Panel – A
•(4pcs) Lucite bars –B
•(1pc) Right Side Panel –C
•(2pcs) Clear Tempered Glass Shelf –D
Hardware Enclosed:
○
1
1/4”-20Tx15mmL
8pcs
○
2
Allen Wrench
1pc
○
3
Rubber Pads
8pcs

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
Assembly Instructions:
1. Remove all of the components from their boxes and place them on a carpeted or scratch-free
surface.
2. Place the Left Side Panel (A) at the ground and then insert Lucite Bar (B) into the corresponding
Hole. Secure with the Screws ① using the enclosed Allen Key ② .
3. Attach Right Side Panel (C) to Left Side Panel (A) and secure with Screws ① using
the enclosed Allen Key ② .

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
4. Attach each Rubber Pads ③ at the corner of the table unit and then carefully place the Tempered
Glass Shelf (D) on Rubber Pads ③.
5. Adjust the Levelers under the Side Panel (A)(C) if needed to have the table stay level.
6. Assembly is complete.
(D)
③
Leveler