JONATHAN Y JYL9717A User manual

JYL9717 CH
JONATHAN Y
ITEM#:JYL9717A/B/C/D/E/FSIZE
:φ52"X H11.5"-16.5"-21.5"

6.3kgs
(13.86lbs)
7.56kgs
(16.63lbs)2.61cu.ft
60.292 20 184 5338 52

4
Lamp panand lamp shade 3

7

Yellow
Green
White
Black
16
GG

1.Fastening the blade to the motor
10
1.Fasten the Blade to the fan-motor assembly by
inserting the alignment post into the slot on the bottom of
the motor and tightening the pre-installed Blade screws.
2.Repeat this step for the remaining blade assemblies.
R

3. Install the lamp cover
REDRED
11

12
Fan Shutdown
Rotation Direction
LightON/LightOFF
NaturalWind
Height for Ceiling Mounted: 11.5"
Height with 5" rod:
Height with 10" rod: 21
16.5"
.5"

Pairing JONATHAN Y Mobile APP
Scan the QR code to download the "JONATHAN Y " APP
a. Download and Open "JONATHAN Y" Mobile App.
b. Turn on the electric power.
c. The app pairing: please long press the key immediately till you hear the
long “beep” sound, And then, entre the wifi_pair status(Intellectual product).
d. Press the + button in the top right corner of the mobile App.
e. Under "Add Manually" select Home Appliances.
f. Select Fan.
g. Click "Confirm indicator rapidly blink" and type in your Wi-Fi name &
password then proceed to click "OK".
h. After the loading screen go back to homepage and you should be able to
find your device there.
Q : If you cannot pair the JONATHAN Y APP
A : 1 . Please check whether the WI-FI network is 2.4g.
2. Turn off the power and turn on the power again, wait for 10 seconds, then press
and hold " " at the same time until the receiver emits a prolonged
beep sound three times.
3. Pairing JONATHAN Y Mobile APP again.
Q : If you remote cannot control the receiver.
A : 1. Please turn off the power.
2. Turn on the power again.
3. Press and hold " " at the same time. Until the receiver emits "beep" three times.
13
Use of intelligent remote control

In addition to the included control , you can operate your fan with the JONATHAN Y app.
Upgradeable with Smart Features
Scan the code to the right with your phone to find out how you can enable smart
features through the JONATHAN Y app and integrate with your smart home ecosystem.
NOTE : Press light toggle and season toggle and hold for 4 second if you prefer not
using the app or broadcasting Wi-Fi.
1. To use the JONATHAN Y app , download it from the App Store or Google Play.
2. Open the app to create your account . You can also log in using your Facebook or Google account.
3.To set up a Wi-Fi connection you will need the SSID and Wi-Fi password for the network you
wish to connect to.
4. You will rceive a prompt to name your fan device and upload an optional picture of it if you choose.
Intelligent function
14

The fan is noisy.
15