JONATHAN Y JYL1070A User manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED
ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION
CARE AND MAINTENANCE
Model# JYL1070A,JYL1070B,JYL1070C,
JYL1070D JYL1070E
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
i
BREAKER
BEFORE
INSTALLATION
.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
JYL1070D
,
JYL1070E
Product Dimensions: 14"Lx 14"W x 27"H
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that
y
ou have all
p
arts indicated before
y
ou be
g
in assembl
y
of this item
Please
make
sure
that
you
have
all
parts
indicated
before
you
begin
assembly
of
this
item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
If
the
cord
is
damaged
,
the
luminaire
shall
be
destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the
p
lu
g
can be full
y
inserted. do not attem
p
t to defeat this safet
y
feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
Part List and Hardware List
cord
unless
the
plug
can
be
fully
inserted.
do
not
attempt
to
defeat
this
safety
feature.
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
Sadd e
a
C Socket 1X G Bulb 1X
D
H
1X
D Harp 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT,
THERE IS LED 9-WATT BULB IN THE BOX .
1 2 1 2
Step 1 Step2
Insert the Harp (D) into the Saddle (B). Put the light on a level surface to check
Put the shade(E) on the Harp(D),then if everything is stable.
( ) p( )
yg
tighten the Finial (F)into the Harp (D)
Insert the bulb(G) into the socket(C).
ENJOY YOUR LAMP