Jonti-Craft 4697JC3 User manual

DHBWA –Rev. F –13 November 2019
800-543-4149
507-342-5169
www.jonti-craft.com Page 1 of 2
Jonti-Craft, Inc.
171 Hwy 68
P.O. Box 30
Wabasso, MN 56293
Instructions for:
4697JC3 4-Section Stackable Locking Lockers-Top
Hardware Package HBWA
Qty Description
(3) XAFH 3" Drywall Screw
(4) XCND Lock Core with Key
(4) XADO 1/4" X 1-1/4" Trusshead Bolt
Assembly Instructions:
1. Wall mount bracket is required on stacking three units high and is only required on top unit in stack.
2. Stack Lockers beginning with Base Locker (4697JC1). Stack Mid Locker (4697JC2) and bolt together
with ¼” x 1 ¼” bolts through bottom of unit into top of lower unit. Repeat for Top Locker (4697JC3).
Required Tools:
-Standard and Phillips
Screwdriver
WARNING:
CHOKING HAZARD/SHARP POINTS- Assembly
hardware contains small parts and components
with sharp points.
Adult assembly required.

DHBWA –Rev. F –13 November 2019
800-543-4149
507-342-5169
www.jonti-craft.com Page 2 of 2
Jonti-Craft, Inc.
171 Hwy 68
P.O. Box 30
Wabasso, MN 56293
3. Locate wall studs and attach Wall-Mount Bracket (Supplied with Top Locker 4697JC3) to the wall studs
using three 3” drywall screws.
4. Place unit over wall-mounted bracket and units are ready to be used.
5. Insert the lock core into the barrel of the dead bolt lock by aligning the tumbler tabs of the lock core
with either of the slots found in the dead bolt lock. Using your thumb press the lock core firmly until it
clicks into place.
6. NOTE: if the lock core does not snap into place you may need to insert a flat screwdriver into the
barrel of the dead bolt lock and turn the screwdriver either direction so that the locking mechanism is
in line with the slots in the barrel of the dead bolt lock.
7. Follow directions found attached to the provided master key to remove cores from the dead bolt lock.
8. If you experience any difficulties when assembling this product, please contact the Jonti-Craft
Customer Relations Team at [phone] or [e-mail]. All other requests for
assistance must be directed to your Jonti-Craft Dealer.