Joy CAT TREE User manual

f
f
f
f
----- 1 ----- ----- 2 -----
48x48cm*1
1
1
48x48cm*1
2
48x20cm*1
3
48x20cm*1


40x40cm*1
4
*An extra spare is provided for each kind of screw
( M8*20, M8*40, M8*80)
CAT HOUSE



within 24 hours!
Overall Dimensions: 18.9” L x 18.9” W x 58” H (48 x 48 x 147 cm)


Materials:
Frame Structure: Material: MDF Board
, 


Loose components will result in damage to the cat tree. Ensure

Check that screws are secure once a month to ensure

[email protected]
ASSEMBLY INSTRUCTIONS
JOYO CAT TREE SPECIFICATIONS
NEED HELP?
• Step1:
pencil.
• Step2: Please drill a hole in the wall for each anchor. (When using


• Step3:
the wall surface.
• Step4: Place a screw in the center of the wall anchor.
• Step5: -
driver.

manual
avoid personal injury to pet or property damage.

away to avoid accidents.




product against wall or corner.

necessary.
• Always supervise your pet when using this item.


worn, loose or detached.
• As with most furniture, do not place in direct
sunlight and/or

rust on metal surfaces

recommended for outdoor use.
• Spot clean only with gentle liquid detergent mixed
with water.

future reference.

PARTS LIST ANTI-TOPPING FITTINGS


Hole for
installing the ladder
STEP1
STEP3
58inch
18.9inch
18.9inch
STEP2
STEP4
HOW TO USE THE ANTI-TOPPLING FITTINGS?

5
35x30x25cm*1
6
40cm*2
7
7x42cm*1
8
Top Perch
Diameter: 11.81”
Condo Dimension:
13.78” L x 11.81” W x 9.84” H
f
f
f
6
2
fff
f
ff
10 10
5
A
A
A
A
f
a
D
B
b
f
f
b
C
E
11
INSTALLATION STEPS
47
7
3-23-1



Post "E" onto Plate " 11 "
with Screw "b" .
Plate " 11 " onto Scratching
Post "B" and Post "D" with one Screw "b"
and one Screw "f".
Perch " 5 " onto
Scratching Post "C" .
CAT TREE USER MANUAL
Post "B" and
two Scratching Post "D" to the Base Plate
"1"with four Screws "f".
48x48cm*1
1
35cm*2
35cm*2
D
B
M8x40*4
f
Plate " 3-1 "
onto one Scratching Post "B" and one
Scratching Post "D" with two Screws "b".

48x20cm*1
M8x80*2
b
Step 3: On the right, install the Plate " 3-2 "
onto another Scratching Post "B" and another
Scratching Post "D" with two Screws "b",
as shown.
MORE SPECIFIC INSTALLATION STEPS
----- 3 -----
Step 4: As shown, use one Part " 8 ", one
Part " 9 ", two Post "F" and four Screws "f"
to install the ladder.
7x42cm*1
8
7x42cm*1
9
15cm*2FM8x40*4
f
Plate " 3-2 "
(which has 4 screw holes) with two
Screws "a".
M8x20*2a
Step6: Hang the hammock Part " 4 "and Part
"7"on the Plates (" 3-1 " , " 3-2 ") on

Step7: Fix two Scratching Post "B" and two
Scratching Post "D"
as shown.
35cm*2
35cm*2
D
B

48x20cm*1
M8x80*2b
Step8: Connect the Hanging Rope " 12 " to
Plate " 2 ".
48x48cm*1
2
2 + 12
35cm*1
12
Plate "②"+ the Hanging Rope
" 12 " onto to the Posts with two Screw "f"
and two Screws "b".

Cover " 6 ", four Post "A", and eight
Screw "f".
Post "B" and
one Post "D"Plate "②".
Step 12: Place the Condo onto Plate " 2 ". Fix
it with one Screw "a" from the Center of

35cm*1
35cm*1
D
B
35x30x25cm*1
6
22cm*4M8x40*8 A
f
Post "C" onto
the Condo with one Screw "f".
M8x80*2
M8x40*2
b
C
f
48x20*1
11
M8x80*1b M8x40*1
35cm*1
M8x40*1
f
10
f
φ30x5cm*1
5
Balls
"⑩"into the hole of the Post "E".

hole when it is �lted 45°
Completeled, Just Enjoy it!
35cm*1
E*3
M8x20*1
a
45°
40x40cm*1
4
40cm*2
7