Joyonway PB555 User manual

Simplified operation
instruction
PB555
V1.0

PB553has navigation keys :
Users can realize all the operation with navigation keys. In the display interface,
the green background of words or icons is the choosing cursor. Only one item
can be chosen in every interface. With navigation key, the position of cursor and
relative setting can be changed.
Pump 1 shortcut key:
Will be used to control the on/off of pump 1 , if pump 1 is single speed pump; if
pump 1 is a double speed pump, pressing continuously the key can switch from
low speed to high speed and off. The sequence is: start low speed,->start high
speed->turn off.
Pump 2 shortcut key:
Are with the same function as pump 1 shortcut key.
pump 1
navigation key (up)
pump2
confirm
navigation key (right)
navigation key (left)
light
navigation key (down)
Screen Invert
WARNING
1. Please connect power strictly accoding
to the SPA power data plate.
2. Please do not turn the SPA power on
until the water reaches water level line
inside the tub.
WARNING
Please set time and date
before using the SPA
control system.
1

Screen Invert shortcut key:
It can realize the displayed content 180 degree inverting and navigation key
direction will be changed accordingly.
Light has two modes, in mode of on and off, press the shortcut key to turn on and
off the light. In RGB mode, light has 9 states including automatic color change,
red, green, yellow, blue, purple, cyan, white and turning off. Users can switch
among these states.
Light shortcut key:
Manual Heating
When manual heating function is started, a heating icon “ ”will be
added in the menu. Users can manually start the heater in the home interface.
When the manual heating function is turned off, the heating icon will disappear.
Heat
When the green cursor is on “ ”or“ ”, press “ ” to set the time
period as on or off. Press “ ” to entering time setting. Press “ ”to move
the cursor.
Press “ ”and “ ” to set the time. Press “ ”and “ ” to exit the
time editing. And cursor will be moved back to the ver y left side. After the time
setting is done, press “ ” to store the setting and return.
Timing heating and its time setting
When the control system is set as timing
he atin g mo de, the heater can oper ate
auto m a t i c a l l y i n two se t s of t h e time
periods . And the two time periods are
independent from each other. Two time
periods can be set overlapped. For example,
if time period 1 is 06:15 ---13:15, time
period 2 is 10:15---16:15, the heater will work between 06:15---16:15. If the
starting time is larger than the ending time, then the heater will continuously
work till the ending time of next day. For example, if the time period is between
20:00---10:00, then the heater will work from the 20:00 of first day till the 10:00
of the next day. Note: when the time period is set as on, during the period, the
heater will work. If the time period is set as off, heater will be turned off.
Back
1 2
2

3
Filter time
When the control system is set as timing
water cycle mode, its on/off and time period
setting methods is the same with timing
heating.
Temperature unit
In Set of the menu, press“ ”and“ ”
to move the cursor to Temp Unit. Then press
“ ”. Temerpature unit can be set as ℃
or ℉.
Manual C.pump
When the manual cycle pump function is started, there will be a cycle pump icon
“ ”added in the function operation interface. Users can manually start
cycle pump in the home interface. When the manual cycle pump function is
turned off, this icon will disappear.
CPump
Mode
PB553 control panel have four different
modes. They can be stored and selected with
navigation keys.
How to store the setting: In Set-> Mode of
the menu, press “ ”and “ ”to
move the cursor to the items need to be
saved then press“ ”. If the square on
the right side of the item is solid, then it indicates the current mode is stored.
Mode of jet(pump), blower, ozone, heat, and brightness can be stored.
How to select the mode stored: In the main interface, press “ ” and “ ”to
move the cursor to “ ”. Then press “ ”in turn to select the stored
the modes. Modes of PB553 control panel can be selected by short-cut key
“ ”. Note: please pre-set mode function before use it the first time.
4
Auto lock
In the Set of menu, press “ ”and “ ”to move the cursor to “Auto
Lock”. Then press
“ ”to set the lock starting time as “off”, “30S”, “1 min” and “3 min”.
When set as off, the lock function is turned off. When the lock is started, press
continuously “ ”for 3S. When “Auto Lock” disappears from the screen, the
auto lock function is disabled.
Mode

When the wifi transceiver is on OFF mode,
pressing'“ ”, Wifi state will be
displayed as “clean”. After a few seconds,
when Wifi state is switched to “AP”, it
indicates the password is successfully reset.
For Wifi connection and operation method,
please refer to SPA APP manual instruction.
Wifi
When the control system is connected with a Wifi module, in the Set -> of the
menu, there will Wifi
Wifi transceiver has three states: “OFF”, ”AP”, and “Sta”.
Wifi mode can be compulsively set as AP or OFF. But it can not be set as Sta mode
compulsively. When the wifi transceiver is connected to a router, the system will
automatically set the wifi mode as Sta.
When the Wifi mode is compulsively set as AP, the wifi transceiver will be
automatically disconnected and the connected the Wifi will be forgotten. When
users compulsively set the wifi mode as OFF, wifi transceiver will stop working.
Reset the APP login password: when users forget APP login password, they can
reset the password on the panel to the factory default “Joyonway”.
Ozone
Ozone function has manual mode and auto mode.
In the Set of the menu, press “ ” and “ ” to move the cursor to Ozone.
Then press “ ” to set the ozone as auto start mode or manual start mode.
Auto start operation can refer to control regulation description of the control
system.
In manual mode, there will be a icon “ ” added in the menu. Users can
manually start the ozone in main interface. When manual start mode is turned
off, the icon will disappear.
Temperature setting
Temperature setting range is 50 F- 104F(10C
-40C). In Set-> Temperature of the menu,
temperature val ue can be incre ase d or
decreased with“ ”and“ ”.
Temperature setting will be automatically
stored when exit menu.
Ozone
4

5
When some problems occur requiring users' attention, the alarming information will be
displayed on the control panel. If several problems occur at the same time, the
alarming information will be displayed in turn. Below is an example:
Below is the detailed description of the control system alarming information:
Alarming information
display position
Date & time
In Set-> Date &Time of the menu, press“ ”to
move the cursor, and set the date and time with
“ ” and“ ”. The setting will be
automatically stored after exiting the menu. If
the control system is off power, the correct time
setting can be kept for a few days.
Backlight brightness setting
Backlight brightness setting range is 1-30. In Set -> brightness of the menu, press
“ ” and “ ”to adjust the backlight brightness. The value will be automatically
stored when exiting the menu.
Temperature sensor disconnected
Control system detects the temperature
sensor is disconnected. Please check the
connection of temperature sensor to the
system. And replace it with a new one if
necessary. ower the system. If the problem
remains, please contact technical support.
Temperature sensor short circuit display
Control system detects the temperature
sensor is short circuited. Please check the
temperatu re sens or and its connecti on.
Replace it with a new one if necessary.
F1:TEMPERATURE SENSOR
DISCONNECTED
F2:TEMPERATURE SENSOR
SHORTCIRCUIT

6
Auto reset thermo switch open
I t i n d i c a t e s t h a t t h e h e a t i n g p i p e
temperature is too high. This may happen
when heater is started and there is no water
in heating pipe or water flow is too slim.
Action: Please ensure there is water in the
SPA tub. If the problem occurs frequently,
please contact for technical support.
Manual-reset thermo switch open
It indicates the heating pipe temperature is
too high. Please contact technical support.
F6:MANUAL-RESET
THERMOSWITCH OPEN
Eeprom (main Board Memory) Error
Please disconnect the power and wait for 10
se c o nds to repow e r th e syst em. If th e
problem remains, please contact technical
support.
F8:EEPROM(MEMORY)
ERROR
F5:AUTO-RESET
THERMOSWITCH OPEN
Temperature is too low
Control system detects temperature sensor's
temperature being too low. Please pay attention
to freezing problem.
F4:TEMPERATURE IS
TOO LOW
Temperature is too high
Reason: the system detects the temperature
sensor's temperature being too high. This can
happen when the heater is on, and there is no
water in the heating pipe or the water flow is too
slim. Action: please ensure there is water in the
SPA tub. If the problems occur frequently, please
contact technical support.
F3:TEMPERATURE IS
TOO HIGH
F9:SYSTEM SETTINGS
ERROR
System setting error display
Reason: After power connection, the system
reads the system configuration verification to be
incorrect from EEPROM (main board memory).
Action: please disconnect the power and wait for
10 s ec on ds to re po we r the s ys te m. If the
pr ob le m rem ai ns , pleas e co nt ac t t ec hn ic al
support.

Shenzhen Joyonway Electronics & Technology CO.,LTD.
ADD：4F,Section C,Building B6,China Merchants Guangming Science Park,
Guanguang Road 3009,Guangming New District,Shenzhen, China
TEL [phone] 26010708：
Sale Tel [phone] 26010859：+86 (755)
Oversea sales ([phone]：
China sales ([phone]：
FAX [phone]：+86 (755)
P.C. 518106：
WEB www. .com：joyonway
E-mail sale1@ .com：joyonway
Oversea TEL: [phone]
E-mail: [e-mail]
China TEL: [phone]
AFTER-SALES SERVICE: