Joysfeel RDT800V User manual

Remote Dog TrainingCollar
Userguide
RDT800V
RDT1500V
ShenzhenJoysfeelTechnology Co.;Ltd. .
http://www.joysfeel.com

-1-
Remote Dog TrainerOperationGuide
Thankyou forchoosing Joysfeel,the bestremote dog
trainingcollarin China. We wantto ensure yourpet s
safetybyprovidingyou with the toolsand techniques
to successfullytrain yourpet.
Ifyou have anyquestions,please contactusbyemail
[e-mail] orvisitourwebsite at
www.joysfeel.com
Please read the operation guide carefullybeforestartto
train yourpets.
Thisinstruction issuitableforRemote dogtraining
collarRDT1500 seriesand RDT800 series.

-2-
TableofContents
Components…………………………….…….....3
Howthe systemworks…………………………..3
MainFeatures……………………….…..……….4
Transmitter……………………………...….........6
Receive Collar……………………...………........9
SettingUp Multi-dogSystem……….………….10
Charging ……………………………..……........14
TrainingGuide ………………………............…16
TroubleshootingGuide……………...…...…..…17

-3-
Components
Include:1, RemoteTransmitter2,Receiver3, Collar4,charger
5,USBcable6,spanner7, Lanyard8,LongContactPoint.9.Tset
Lignt
Howthe SystemWorks
TheRemote DogTrainerhasbeen proven safe,
comfortable, and effective forall petsover10 pounds.
Thissystemassistsyou in controllingyourpetwithout
aleashinalongdistance range. Atthe pushofabutton,

-4-
the RemoteTransmittersendsa signal, activatingthe
ReceiverCollar. Usingthe Remote Trainerconsistently
and correctly, manymisbehaviorthatyourpetexhibits
can be correctedoranybasic obedience commandscan
be taught
Important: The Remote Trainer actualdistance
depending on theway youhold the Remote
Transmitter,the range may vary. Hold the Remote
Transmitter in a horizontalposition away fromyour
body to achieve optimumrange. Terrain, weather,
vegetation, Vehicle, Building, transmission from
other radio devices, and other factorswillaffectthe
range ofyour Remote Trainer.
MainFeatures
1. Range in openfield isup to1500 meters(800
meters forRDT800),
2. Train up to 3 dogsfromthesame transmitter
3. 10 levelsofstatic shock

-5-
4. 10 levelsofvibration
5. “Buzz”sound activated with a separatebutton
6. Twobuttons “+”and “-”allowyou to setyour
shockand vibration intensity
7. DogSelection Button allowyou to selectyourdog
8. LCDdigitaldisplayinclude:10 shock&vibration
levels, dogID, currentmode (sound, shockor
vibration), batterylevel.
9. Memorize shock&vibratelevelin transmitterfor
differentdogs
10. Easyto operationwith rubberbutton
11. Waterprooftransmitterandreceiver. Dogcan swim
freely.
12. Rechargeable 3.7VLi-ion batteryfortransmitter
and receiver
13. StrongTPUCollarStrap
14. Led lowpowerindication, red lightwillflash when
batterylevelislow.
15. Full functionalmulti-dogtrainingsystem
16. Around 8 secondssafe static shockprotection
17. 2-yearwarranty

-6-
Transmitter
” And buttons:press these buttonsto
adjustthe shockintensityand Vibration intensityfrom
1 to 10 level, LCDdisplaychange atthesame time.
”button:it isthe powerswitch;holdthisbutton
Antenna
Stimulation
and Vibration
LevelButton
On/Off
Button
Dog
Selection
Button
LedLight
LCD
BuzzButton
Vibration
Button
Static
Shock
Button

-7-
for3 secondsto switch on power, then LCDwill
displaythe saved information. You maychange DogID
bypress the relative buttons. Ifyou wantto switch off
the power, hold thisbutton for3 secondsto switch off
power.
”button:no-stimulation warningbuzz
”button:Emit vibration stimulation. Press 1time,
vibrate1 time. Pressand hold on, emit continuous
vibration, and will stop automaticallyafter8seconds
”button:Emit shockstimulation.Press 1 time,
emit 1shock.Press and holdon
,emit continuousshock,
and will stop automatically after8 seconds
A/B/C”buttons:Dogselection button, default is A”
.
Yourtransmitteriscapableoftrainingup to three dogs
with optionalreceive collars.You select Adog, LCD
displaydogID “A-XX”.Ifyou wanttotrain Bdog,
press B”button, LCDwill display “B-XX”Ifyou
wantto train Cdog, press C”button again, LCDwill
display “C-XX”. “XX”isforshowingthe shock&
vibration level.
Thetransmitterhasthe memoryfunctionsto keep up

-8-
the suitable shock&vibration levelsfordifferentdogs,
10 levelsshockstimulation, 10 levelsvibration
stimulation. One tone.
NOTE:The red Led lightwill flashwhen the
battery islowpower. Recharge the battery atonce.
ReceiveCollar
NOTE: CHARGERECEIVERBEFOREFIRSTUSE
On/Off Button
Press andholdon4seconds to turnthecollaron.Two
confirming tones willsoundandthecollargreenLed
light willflash1timeper5seconds.
Press andholdon4seconds to turnthecollaroff. One
longtonewillsoundandthegreenLedlight willstop
flashing andoff .
Turnthecollaroff whennot inuseto conservebattery
ContactProng
Chooseshortorlongprongto match
thedog s coattype
LEDLight
Indicatetheworkingstatus,
Low battery,Chargingstatus
USBchargingCover
OpentheRubberCover
andinserttheadaptor
pluginto USBcharging
plugto charge

-9-
SettingUpMulti-dogSystem
You can expand yourone-dogRemoteTrainerinto
multi-dogRemoteTrainerbyyourself. Simplypurchase
extra receive collarand addthemto yoursystem.
1. Matcha Receivecollar To add a Receive collar
to yourremote dogtrainingsystem, followingthe
belowsteps:
Step 1: Take out1 PCS unmatched receive collar. Press
and hold “ON/OFF”button.aftertwo “beep”
sound ,then release, receiverispower
on ,Green Led flashfrequently.(Note :never
open 2 ormore unmatched receivers.)
Step 2:Take outthe transmitterthatyou wantto match
receiver. Pressand holdon “ ” button until
Spanner
ChangetheContactProngbasingonthepet s
coattype.
Notes:IftheContactProngis tight ,
Continuetoturnthespannerclockwise,
TheContactProngwillbebroken. Never
turnthecontactprongtootightly.

-10-
LCDdisplayoccurthen release, Transmitteris
poweron.
Step 3:Press and hold “ ” button and “ ”button at
the same time, until “A”onthe LCDdisplay
move left torightautomatically, then release.
Entermatch receivermode.
Step 4:Take the transmitterto closethe unmatched
receiver50~100mm.
Step 5 :Press and hold onthe Dogselection button .If
you match “A”dog, Press “A”button ;Ifyou
match “B”Dog, Press “B”button ;Ifyou
match “C”dog, Press “C”button .Afterlisten
to 3 “beep”sound fromreceiverand see green
Led flashslowdown , Thenrelease .
Specialnote:You mustconfirmthatlistento3
sound beep”fromunmatched receiverand see
green Led flash slowdownfirst,then release dog
selection button. Ifyou match receiverfailure,
you need to cancelthe failure matched receiver
first,then re-match again. .

-11-
Step 6:Press and hold “ ” button and“ ” button at
the same time again, untilthe characteron the
LCDdisplayno change, then release.
Step 7:TestmatchedReceiver---Chose dogfirst,then
press “ ” button, you can hearthe “beep”
sound fromthe matched receiver.
Congratulate you, match receiver
successfully.
Note:Aftermatched receive collar, the dog
selection button willreturn to A”default.
Beforetestthe matched collar, please chose
dog first.
2. Cancela matchedReceiver Followup the
belowstepsone byone tocancelthe matched
Receiver:
Step 1: Take out1 PCS matchedreceiver. Press and
hold “ON/OFF”button.aftertwo “beep”
sound, receiverispoweron, Green Led flash 1
time per5 second.

-12-
Step 2:Press and hold “ ” button untilLCDdisplay
occurthen release, Transmitterispoweron.
Step 3:Press and hold “ ” button and “ ” button
atthe same time, until “AAA”on the LCD
displaydisappearin turn, then release. Enter
cancelmatchedreceivermode.
Step 4:Close the receive collar50~100mm, press the
dogselection button one time (You can press
“A”or “B”or “C”freely, Itissame).You can
listen to 2 “beep”sound fromreceiver.
Step 5:The green Led lightofReceiverflash
frequently. Congratulate you cancelthe
matched receiversuccessfully.
Step 6 :Press and hold “ ” button and“ ” button
atthe same time again ,untilcharacteron the
LCDdisplayno change ,then release .Exitthe
cancelmatchedreceivermode .
Charging
Thetransmitterand receivercharge rapidly –about2

-13-
hours areneeded.
Thetransmitterand the receive collarcan be charged at
the same time. Common adaptorfortransmitterand
receivercharging
To recharge, open the rubbercoverfirst.Plugthe
adaptorcontactpininto householdAC poweroutlet
and insert the adaptorplug intoreceiverchargingport.
The TransmitterandReceive Collarcan be charged by
connectingUSBcableand other5VDC powersupply,
such ascellphoneadaptor, notebook, computer.
Do notcharge batteriesin especiallyhotareas, keep
awayfromfire.
1. Receive CollarCharging
Thered Led lightison when charging.
Thegreen Led lightison and the redLed lightisoff
when receive collarisfull charged.
TheReceiverred Led lightwill flash when the battery
islowpower. Recharge the batteryatonce.
2. TransmitterCharging
Thered Led lightison when charging.

-14-
Thegreen Led lightison and the redLed lightisoff
when receive collarisfull charged
Thetransmitterredlightflashesif the batteryislow.
Charge it promptly
Important: Whenstock the productsfor4~5 weeks,
Please give a fullcharge for Transmitterand receive
collar.
TrainingGuide
1. Fitting Collaron the Dog
Placethe collarstrap in themiddle ofthe dog sneck.
Thereceivershould be on the underside ofhisneck
although on some dog snecksthe receiverwill
naturallyseeka slightlyoff-centerposition. The rubber
covershouldfacebackwards( towardthe dog schest).
Tighten the buckle byholdingit with twofingersas
you pull the strap snug. Remote trainingcollars mustbe
puton a dogquite snuglyto ensure consistentcontact
and reliable stimulation.

-15-
Do notputanyfingers underthe strap asyou tighten it.
2. Stimulation and vibration
YourRemoteTrainerhas10 levelsofintensity. So you
can find the bestlevelforyourdog stemperamentand
the type oftrainingyourdog.You mayalso select
eithershockorvibrate stimulation,dependingon your
dog stemperamentand yourtrainingpurpose.
You maypress “+”or “-“button toselectsuitable
shocklevel,then press and hold onthe ” button for
around8 secondscontinuousstimulation;press one
time , emit one static shock
You maypress “+”or “-“button toselectsuitable
vibration level,then press and holdon the ” button
foraround 8 secondscontinuousvibrate;pressone
time , emit one vibrate.
3. Mode change
When you change the sound/shock/vibration mode,
correspondingpatterncan displayon the LCD.
Ifyou press “ ” button, “ ” displayon the first

-16-
line. Ifyou press “ ” button, “ ” displayon the
firstline. Ifyou press “ ” button, “ ” displayon
the first line.
4. Memory
Transmittercanindependently
memorythe levelofthe
shockand vibration ofA/B/Cdog, and independently
displayon LCD.Afterturnon the power,transmitter
can displaythen information ofthe lastoperation.
Auxiliaryfunction
1. Backlighton
When you press and hold “ ” button and “ ”button
atthe sametimeatleast3s,LCDdisplay “888”for
0.5s,
the backlightenterlighton mode, backlightison.
Unlessyou pressand hold “ ” button and “ ”
button atthe same time atleast3s, backlightturnoff.
Thismode issuitablefornightorlowlightconditions.
2. ProductType

-17-
When you press and hold “ ” button and “ ”button
atthe same time atleast3s,LCDdisplayproducttype
code. IfLCDdisplay “8”,the type isRDT800, if
display “15”,the type isRDT1500.
3. Transmitteraddress code
When you press and hold “ ” button and “ ”button
atthe same time atleast3s,LCDdisplayTransmitter
address code.
TroubleshootingGuide
Problem#1:No stimulationwhen atransmitter
button ispressed.
Thereceiverhasnotbeen activated. The receivermust
be turned on otherwiseitwon tworkatall.
Thereceiverhasnotbeen setto yourtransmitter.
Followthe instruction to match.
Problem#2:The BeeperofReceiverdoesn’tmake

-18-
any sound when the Receiveristurned on.
Pressdogselection button to choose correctDogID
before presstransmitterbuzz controlbutton.
TheBeepercomponentisloose, send to service center
to repair.
Problem#3:The stimulation seems too high, not
high enoughorno feeling atall
Thecollarstrap isnottightenough. Make surethe
contactspointsconnectthedog sskin well.
Theintensitylevelisnotcorrect. Change the shock
level.
Thebatteriesare dead. Recharge asneeded.
Problem#4:The receiverlightchangescolorto
indicatelowbattery very quickly
Theunithasbeen leftturned on between training
session.
Make sure the receiveristurned offafteruse.
You aretrainingin verycold weather.
Problem#5:The RemoteTrainerdoesn’thave range
orthe range issignificantly reduced.
Eitheryou orthe dogisshieldedbya metalstructure.

-19-
Operateit farawayfromthese structures.
Thereceiverison backwards. Forbestrange, position
the receiverso thatthe lightfacetowardthe dog snose,
radio interference. Wait ashort while then tryagain, or
move to anotherarea.
Problem#6:The receiverseems can’treceive any
signalorcan notwork atall
Checkthe receiveron/offbutton, make sure the
receiveristurned on.
Checkthe transmitter, ifitislowbattery, charge
transmitterfirst.
Cancelthe receivermatch, then re-match itwith
transmitter. Ifreceivercan notworktoo, send backto
servicecentertorepairorreplace.
Formoreinformation, please contactJoysfeel.
Shenzhen JoysfeelTechnology Co., Ltd