JUKI MH-1410 User manual

MH-1410
The machine is designed specifically
for the attaching of waistbands to jeans, casual pants, etc.
MH-1410D/AK122/V072
High-speed, Cylinder-bed, Needle-feed, Double Chainstitch Machine
MH-1410

The differential between the needle feed amount and
bottom feed amount can be adjusted within the range
of —5 % to +25 % of the latter. Waving or twisting of
the material can be prevented by adjusting the
differential feed amount to suit the material thickness,
the type of folder to be used, and other sewing
conditions.
Differential needle-feed amount adjusting mechanism
The machine supports two different waistband styles;
"pre-cut style" and "continuous band style."
The differential of the needle feed amount is adjustable
✽The stitch length is adjusted by push-button control.
The stitch pitch can be easily adjusted since the needle feed
synchronizes with the bottom feed.
This cylinder-bed, needle-feed, double chainstitch
machine attaches waistbands to jeans and casual
pants at the splendid sewing speed of 5,000rpm.
The machine uses a right-and-left split type needle
thread take-up guide. Even when the right and left
needles sew materials of different thicknesses,
separate stroke can be set for the right and left
thread take-up guide to ensure consistently excellent
seam quality.
With its head mechanism to ensure optimum balance
and high rigidity, the machine achieves high-speed
performance of 5,000rpm with reduced operating
noise and vibration.
The MH-1410 is a needle-feed machine noted for an
outstanding feed efficiency that ensures smooth
stitching at the beginning of sewing and consistent
stitch length when sewing multi-layered sections.
MH-1410
Needle thread
take-up guide
(left)
Needle thread
take-up guide
(right)

OPTIONS
The looper can be tilted toward you by operating the lever for easy threading of the looper.
Looper tilting
lever
Looper position during sewing Looper position at the time of threading
(the looper is tilted)
AK122
Pneumatic auto-lifter AK122
Part No.: GAK-A22010B0
(✽JUKI: The SC-510 or a commercially
available needle positioning motor is
required.) ＜For V072＞
Top roller (made of steel)
Part No.: MAV-07236000
Top roller (made of urethane)
Part No.: MAV-07237000
Top roller cover (for urethan roller)
Part No.: MAV-07240000
Brakedown folder bracket (asm.)
Part No.: 311-41658
(✽Front-fold style folder base for pre-cutting)
The light-type cloth puller offers an excellent follow-up capability. (V072)
Excellent operability
Needle cooler (pneumatic type)
Part No.: 311-42565(for MH-1410A)
Part No.: 311-43068(for MH-1410B,C)
Part No.: 311-43167(for MH-1410D)
The cloth puller helps to obtain a consistent stitching
pitch from low speed to high speed regardless of the
sewing speed.
The cloth puller is driven by a top roller, ensuring
excellent feed efficiency and uniform stitch length at
multi-layered parts of the material.
The cloth puller employs an intermittent feed system that
reduces the load to the needle. The roller is designed to
permit stepless adjustment of the feed amount.
✽The V072 cannot be retrofitted to the machine after setup.

MH-1410
●To order, please contact your nearest JUKI distributor.
//
A
B
C
D
AK122 V072
✽ The needle gauge that falls within the range from
4.8mm to 50.8mm is available.
 Gauges other than those shown in the above table
are available on a special order.
✽The V072 cannot be retrofitted
to your machine after the setup.
Designate one when placing
order for the machine.
✽
 For needle size #23 to #25, a special-order gauge is required.
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
SPECIFICATIONS
5,000rpm (when stitch length is 4.5mm or less)
4,000rpm (when stitch length is 4.5mm 〜6.4mm)
(4,000rpm for the machine provided with cloth puller)
MH-1410A MH-1410B MH-1410C MH-1410D
Needle-feed
Needle-feed + Cloth puller (optional)
Double chainstitch
2-needle 4-needle
2.1mm 〜6.4mm
By push-button (needle-feed/bottom-feed synchronized)
9mm
32mm
DV ×57 (#21) #18〜#25✽
Longitudinal motion method (longitudinal swing method) : Looper can be tilted for threading
Provided as standard (—5% 〜＋25%)
395mm (for the machine that is not equipped with cloth puller)
Trochoidal pump type automatic lubrication
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
46kg 50kg
Model name
Needle gauge
Number of needle
Feed system
Stitch system
Max. sewing speed
Stitch length
Stitch adjusting method
Lift of the presser foot
Needle bar stroke
Needle
(at the time of delivery)
Looper motion
Fine adjustment function
for the needle feed amount
Peripheral dimension
of the cylinder section
Lubrication
Lubricating oil
Weight of the
machine head
31. 8mm
(1-1/4")
34. 9mm
(1-3/8")
38. 1mm
(1-1/2")
6.4mm＋25.4mm＋6.4mm
(1/4"＋1"＋1/4")
Needle gauge Code Code Code
2-needle：31.8mm (1-1/4")
2-needle：34.9mm (1-3/8")
2-needle：38.1mm (1-1/2")
4-needle：
6.4mm＋25.4mm＋6.4mm
(1/4"＋1"＋1/4")
Pneumatic auto-lifter
Not provided
Provided
Cloth puller
Not provided
Provided
MARKETING & SALES H.Q.
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
✽ This catalogue prints with environment-friendly soy ink on recycle paper.
APRIL, 2008 Printed in Japan(A)
8-2-1 , KOKURYO-CHO, CHOFU-SHI,
TOKYO
182-8655 , JAPAN
PHONE :
(81)3-3480-2357, 2358
FAX :
(81)3-3430-4909
http://www.juki.com