Jumbuck GEN-D325 User manual

32 cm Portable Dome BBQ
∙ Powder coated black enamel bowl and lid
∙ Chrome cooking grill
∙ Bakelite handle
∙ Stainless steel legs
∙ Adjustable air vents
∙ Assembled size: 325D x 460Hmm
Charcoal Grill
Solid Fuel Cooking Grill Adjustable
Side Ventilation

Jumbuck 32cm Portable
Dome BBQ (GEN-D325)
IMPORTANT SAFETY INSTRUCTIONS
ARDWARE PACK
IMPORTANT NOTES
Do not use this BBQ indoors.
Do not use this BBQ inside a tent, gazebo or within a confined space.
This BBQ will become very hot during and for some time after use. Keep children away
from the BBQ and do not touch metal parts of the BBQ when in use
Use suitable gloves for protection, especially when loading the BBQ with coal or
charcoal
We recommend protecting your BBQ when not in use with a cover to protect it from
rusting and exposure to rain.
For outdoor use only.
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
Read the installation instructions thoroughly before
installing this equipment.
Warning: accessible parts may be very hot. Keep young
children away.
Do not move the appliance during use.
Any modification of the appliance may be dangerous.
Installer to leave instructions with the consumer and
consumer to retain them for future reference.
Dispose of all polythene packing carefully and keep out of
the reach of children
1

EXPLODED VIEW & PARTS CODE
Reference#
Part Name
Parts Code
1
Body
GEN-D325-01
2
Leg
GEN-D325-02
3
Charcoal Grid
GEN-D325-03
4
Buckle Support
GEN-D325-04
5
Buckle
GEN-D325-05
6
Handle
GEN-D325-06
7
Air Vent
GEN-D325-07
8
Lid
GEN-D325-08
9
Cooking Grill
GEN-D325-09
10
Cooking Grill Handle
GEN-D325-10
2

CARTON CONTENTS
Reference#
Description
Part#
Illustration
Quantity
1
Body
GEN-D325-01
1
2
Leg
GEN-D325-02
3
3
Charcoal Grid
GEN-D325-03
1
4
Buckle Support
GEN-D325-04
3
5
Buckle
GEN-D325-05
3
6
Handle
GEN-D325-06
1
7
Air Vent
GEN-D325-07
2
8
Lid
GEN-D325-08
1
9
Cooking Grill
GEN-D325-09
1
10
Cooking Grill
Handle
GEN-D325-10
1
3

HARDWARE PACK CONTENTS
Reference#
Description
Illustration
Quantity
A
Bolt M6 x
20mm
3
B
Flat Washer φ25
3
C
Bolt M3 x 8mm
6
D
Nut M3
6
E
Bolt M5 x
10mm
4
F
Wing Nut M5
2
G
Nut M5
2
H
Flat Washer φ16
2
I
Nut M5
2
4

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS
Remove all contents from packaging, and make sure all the parts are present before
attempting to assemble!
Tighten all bolt connections by hand first.
When the BBQ is fully assembled, retighten the screws, nuts and bolts by using a
wrench and screw driver.
TOOLS REQUIRED
Philips screwdriver
Pliers or adjustable spanner
STEP 1
Assemble the legs (part 2) on to the BBQ body (part 1) as shown below. Use bolt (part A)
and flat washer (part B) to secure.
5

STEP 2
Assemble the air vent (part 7) on to the BBQ body (part 1) as shown below. Use bolt
(part E), nut (part I) and wing nut (part F) to secure. Place charcoal grid (part 3) into the
BBQ body (part 1) as per illustration below.
STEP 3
Assemble the buckle support (part 4) and buckle (part 5) onto the BBQ body (part 1) as
per illustration below. Secure with bolt (part C) and nut (part D).
6

STEP 4
Assemble the air vent (part 7) onto the BBQ body (part 1) by using bolt (part E), nut (part
I) and wing nut (part F) as per illustration below. Assemble the handle (part 6) onto the
BBQ body (part 1) by using bolt (part E), flat washer (part H) and nut (part G) as per
illustration below.
STEP 5
Place the cooking grill (part 9) into the BBQ body as per illustration below. The cooking
grill handle (part 10) can be used to removed cooking grill when required.
7

Fully Assembled
Your BBQ is now ready for use.
Please take care when lighting your BBQ.
Always keep children away from this BBQ at all times.
8

WARRANTY
Thank you for purchasing one of our quality
Jumbuck BBQs.
YOUR JUMBUCK BBQ IS COVERED AGAINST
DEFECTS FOR A PERIOD OF 12 MONTHS FOR PARTS
AND LABOUR, REPAIR OR REPLACEMENT
THIS WARRANTY EXCLUDES SURFACE RUST AND
DAMAGE CAUSE BY ABUSE OR NEGLECT
CONDITIONS OF THE WARRANTY
The appliance must be operated and maintained
in accordance with the instructions supplied in
the operating manual.
Any repair does not extend the warranty period.
Any parts other than original Jumbuck parts will
void this warranty.
FOR WARRANTY CLAIMS
The warranty for Australia is given by :
Genesis International Corporation Pty Ltd
1/71 Truganina Road, Malaga, Western Australia,
6090, AUSTRALIA
[phone]
[e-mail]
Proof of purchase must be presented.
The warranty for New Zealand is given by :
Bunnings NZ Limited
PO Box 14436,
Panmure, Auckland, 1471
NEW ZEALAND
[phone]
[e-mail]
Proof of purchase must be presented.
Any claims under this warranty must be made
within 12 months of the date of purchase of the
product.
9