Jung Smart Visu Server User manual

Smart Visu Server
How do I set up remote access?

SMART VISU SERVER + REMOTE ACCESS 2
Convenient and secure remote access:
With the remote access of the SV
server, you can visualise, control and
adapt your home system to your
requirements at any time and from
any location.
This quick start guide explains the
individual steps of commissioning and
operation using an example.
1. Introduction
COMPONENTS
JUNG
PART NO: QUAN-
TITY
Smart Visu
Server SV-SERVER 1
Remote
subscription SV-SERVER-L12 1

SMART VISU SERVER + REMOTE ACCESS 3
The MyJUNG remote access for your
SV Server can be set up in a few steps.
The table here gives an overview of the
necessary steps.
The individual steps are described in
detail on the following pages.
STEP PAGE
1. Register at the MyJUNG portal 4
2. Purchase remote access for your Smart Visu Server 5
3. Call Smart Visu Server locally via web browser 6
4. Open SV Control and register device 7
5. Activate remote access via MyJUNG portal 8
6. Set up remote access on terminal devices (Windows PC, Android or iOS device) 9
2. Overview

SMART VISU SERVER + REMOTE ACCESS 4
1. Log in to the MyJUNG portal or register
as a new user [1].
3. Activation of the remote access using the MyJUNG portal
First, open the MyJUNG portal on the JUNG website.
2. Select More Information [2] in the
Software Licence Sales selection field
to purchase a remote access license.
12

SMART VISU SERVER + REMOTE ACCESS 5
1. Select the licence purchase for Smart
Visu Server [1] in Software Licence
Sales.
3.1 Licence purchase
You see the products for which you can purchase additional software or licences in Software Licence Sales.
2. Purchase remote access for 12 or 24
months or enter a voucher code.
Confirm the licence purchase with
Accept licence data [2].
3. The following overview shows your
purchased Licences [3].
1
2
3

SMART VISU SERVER + REMOTE ACCESS 6
1. Select the SV Control button [1].
4. Activation of the remote access in Smart Visu Server
After you have purchased a licence, now activate the remote access on your Smart Visu Server.
Call the SV Server in the web browser of your terminal device (PC, laptop, tablet).
To do so, enter the address http://sv-server.local or the IP address of the SV Server allocated by the router.
If the SV Server is protected by a password, enter this.
2. Navigate in SV Control to the Configu-
ration Management tab [2].
1
2

SMART VISU SERVER + REMOTE ACCESS 7
1. Enter your user name and the
associated password [1].
Then confirm the input by clicking on
the Register device button [2].
4.1 Register device
Register your device in the Configuration Management tab. Log in to MyJUNG with your user data for the final activation.
2. In MyJUNG, click on the Manage but-
ton in the Smart Visu Server Remote
Access selection field [3].
1
2
3

SMART VISU SERVER + REMOTE ACCESS 8
1. Activate the remote access by clicking
on the Activate Now button [1].
4.2 Activate remote access
The activation of remote access is performed in the following steps.
2. There you see important information
about your MyJUNG remote access [2].
1
2

SMART VISU SERVER + REMOTE ACCESS 9
1. Click on the Manage button [1] in the
Smart Visu Server Access selection
field.
4.3 Remote access using PC
The control of your home system via remote access is secure and platform-independent. The following pages describe how to set up remote access for your SV server
with various terminal devices, starting with a PC.
2. Select Manage Smart Visu Server [2]
there.
3. Select the Start remote access button
[3] to establish the connection to your
home system.
1
2
3

SMART VISU SERVER + REMOTE ACCESS 10
1. Open the SV Server app and call the
app settings using the gear [1].
4.4 Remote access using Android
Perform the following steps to set up remote access for your SV server using the Android app.
2. Enter your access details for the
remote access under REMOTE –
MyJUNG [2].
3. Select the Automatic [3] connection
mode in the standard case. If
required, the connection to the home
system can also be Only local or
exclusively via MyJUNG.
1
2
3

SMART VISU SERVER + REMOTE ACCESS 11
1. On the first start of the app, select the
Local only [1] connection mode and
enter the IP address of the SV Server [2].
2. Then enter your access details for the
remote access under Only Remote
and confirm your entries with OK. You
can now control your home system
locally or remotely.
4.5 Remote access using iOS
Perform the following steps to set up remote access for your SV server using the iOS app.
3. Call the app settings using the gear
[3].
4. Select the Automatically [4] connection
mode in the standard case. If required,
the connection to the home system
can also be Local only or exclusively
via MyJUNG.
1
2
3
4

SMART VISU SERVER + REMOTE ACCESS 12
5. Completion of setting up Smart Visu Server remote access
Congratulations – you have successfully set up remote access for your Smart Visu Server.
With the SV Server remote access, you now always have your home under control.
Your data will be treated securely and confidentially and are subject to the strict European data protection regulations. JUNG expressly declares that personal data will
not be passed on to third parties.

SMART VISU SERVER + REMOTE ACCESS 13
ALBRECHT JUNG GMBH & CO. KG
P.O. Box 1320
58579 Schalksmühle
Germany
Telephone [phone] / 80 63 79
Telefax +49 (0) 23 55 / 80 63 65
E-Mail [email protected]
For sales contacts in your country see:
jung-group.com/contact
JUNG-GROUP.COM
Any questions?
We are pleased to help.