Jung Visu Pro SENEC Edition User manual

Visu Pro Server SENEC Edition
11.09.20201 / 30024002801
Visu Pro Server SENEC Edition
Ref.-no.: JVP-SENEC-H2
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow manual fully.
Fire hazard! Operation only with power supplies listed as accessories.
Use only in dry rooms.
These instructions are an integral part of the product, and must remain with the end customer.
2 Device components
Fig. 1: Device front side
(1) ON / OFFS
(2) Reset
(3) HDD LED
(4) Status LED
Fig. 2: Device rear side
(5) USB 3.0 (2 x)
(6) LAN 2 (DHCP)
(7) LAN 1 (xed IP address 192.168.178.111)
(8) USB 3.0 (2 x)
(9) HDMI
(10) DC 12 V
2 3 41
5 106 7 8 9
GB

Visu Pro Server SENEC Edition
11.09.20202 / 30024002801
3 Function
Intended use
- Visualisation and operation of KNX systems via devices with HTML5 browser or app (iOS, Android), e.g. Smart
Control, smartphone, tablet, laptop, PC, etc.
- Integration of SENEC energy storage (from version SENEC.Home V2 Li)
- Support of KNX IP Secure and KNX Data Secure (as of version 4.5)
- Operation in local IP networks that support DHCP (Dynamic Host Conguration Protocol), or with xed IP address
(IPv4)
- Desktop device, mounting on DIN rail according to DIN EN 60715 possible
- Max. size of the visualization project as template in JUNG Smart Assistant
- Connection to KNX bus via interfaces (see ref.‑no. in accessories), not included
iThis device is intended for domestic use and home environment only.
iFurther information about this device can be found in the operation manual on our website
Scope of delivery
- JVP Server Pro SENEC Edition including software
- Bracket for wall mounting or DIN rail mounting
- Operating instructions
- Power supply incl. BS adapter (UK), EU (Europlug) and CN (China)
4 Operation
Switching the device on:
• Press push‑button (1).
The device switches on.
The status LED lights up green.
iAfter interruption of power supply device automatically switches on.
Switching the device o󰀨:
• Shut down device.
The operating system shuts down.
• Disconnect power supply.
No power supply for device.
The device is switched o󰀨.
iIn delivery state the device automatically logs on with the user name “JVP‑User”. The JVP‑User has only limited
rights and is recommended for normal operation of the visualization.
5 Information for electrically skilled persons
Fitting and electrical connection
iOperation in living areas can cause radio interferences with other devices.
- Visu Pro Server should not be installed near interference‑sensitive devices.
- Installation in electric control box can prevent interferences.
Connecting and tting the device
• The device can be mounted on the wall or on a DIN rail acc. to DIN EN 60715 with the supplied bracket. Screw
the server onto the bracket.
• Connect the power supply.
• Connect the LAN cable.
Setting up the server
The system has already an admin account with the password “jung” that can be used for system congurations.
In a local network the device can be operated via remote connection by means of the pre‑installed software
TeamViewer – without monitor, keyboard and mouse.
Default password: 123456
iChange all passwords after commissioning and keep it in a safe place.
Default IP address in delivery state:
192.168.178.111 (LAN 1)

Visu Pro Server SENEC Edition
11.09.20203 / 30024002801
Alternative setting up without Team‑Viewer via remote desktop:
• Protect the account “JVP‑User” with a password.
• Congure the automatic log on.
The device uses Windows 10 as operating system.
iMicrosoft updates will be downloaded automatically if the device is connected to the internet. An update will cause
the device to restart at 3:00 am. The disc space is managed automatically by the operating system. For updates
the disc space has not to be managed manually.
You can stop the server with the desktop icon “Import and export of project data”. This enables a reliable import/
export of projects. This program must be run as administrator.
Visu Pro software
The software JUNG Visu Pro in SENEC Edition is installed on the device. The Visu Pro server is designed to display
web pages on various end devices by means of the installed web server.
A permanent visualization on a connected monitor is not recommended.
In delivery state the visualization with the Visu Pro software takes place via port 8083. This port is already activated in
the rewall.
6 Conguration
You can nd detailed information about the conguration or parameterization of the device in the product
documentation. The product documentation is available for downloading on our website.
7 Technical data
Rated voltage DC 12 V
Power consumption typ. 6 W, max. 12 W
Ambient temperature ‑5 ... +45 °C
Storage/transport temperature ‑25 ... +75 °C
Dimensions WxDxH 168 x 106 x 45 mm
Protection class II
Plug-in power supply
Primary voltage AC 100 ... 240 V~
Mains frequency 50 / 60 Hz
Secondary voltage DC 12 V SELV
Secondary current 2 A
Protection class II
Secondary cable length 1.2 m
8 Accessories
KNX IP router IPR 300 SREG
KNX IP interface IPS 300 SREG
KNX USB data interface 2131 USBS REG
2131 USBS
9 Warranty
The warranty follows about the specialty store in between the legal framework as provided for by law.