JUNGLE ROOM JR-220120200 User manual

Step10
Step11
Place oor tray/liner inside the tent oor and secure to Velcro
pieces of the tent cover.
Close all zippers. All parts have been assembled.
Grow tent ASSEMBLY INSTRUCTIONS
JR - 220120200
TENT SIZE: Length: 220cm - Width:120cm - Height: 200 cm

Step8
Step9
Gently pull the “roof” of the tent to cover the two upper front corners
Gently wriggle/adjust all eight corners until cover is square against the
frame
No tools
required
Parts list
1x
1x
4x
4x
2x
2x
14x
2x
2x
Tent cover
Floor Tray
1
2
3
4
5
6
7
27
Step7
Gently pull up the back of the tent cover such that the two upper
back corners of the cover are squarely in place. Note that having a
helper makes this process easier.

Step3
Assemble remaining parts of the frame as shown below, once the
frame is assembled, make sure that all the poles are fully inserted
into the corners.
Step4
Place hanging poles 6 and 7 on top of the frame.
4 5
1
2
2
1
1
2
1
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
4
3
4
3
1
2
2
1
1
2
1
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
4
3
4
3
6
7
7
6

3
Step1
Assemble the bottom half of the frame as shown, making sure that
the poles are fully inserted into the corner.
Step5
Unzip all zippers of the tent cover all the way.
Step6
Put frame upright on the base of the tent, making sure that all four
corners are inside the base.
6
5
5
5
6
6
6
6
4
1
1
1
1
4
Step2
5
5
5
6
6
6
6
4
3
4
3
1
1
1
1
Connect poles as shown