Juniper SRX Series User manual

SRX Series Services Gateways for the
Branch Physical Interface Modules
Reference
Published
2020-11-10

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in
the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks
are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
SRX Series Services Gateways for the Branch Physical Interface Modules Reference
Copyright © 2020 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related
limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)
Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement
(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you
agree to the terms and conditions of that EULA.
ii

Table of Contents
About the Documentation | xii
Documentation and Release Notes | xii
Using the Examples in This Manual | xii
Merging a Full Example | xiii
Merging a Snippet | xiv
Documentation Conventions | xiv
Documentation Feedback | xvii
Requesting Technical Support | xvii
Self-Help Online Tools and Resources | xviii
Creating a Service Request with JTAC | xviii
Overview
1
SRX Series Services Gateway Interface Modules Support | 2
SRX Series Services Gateway Interface Overview | 2
Interfaces Port Naming Conventions SRX Series Services Gateways | 3
Supported SRX Series Services Gateway Interfaces | 5
SRX Series Services Gateway Mini-Physical Interface Modules Overview | 6
SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview | 7
SRX Series Services Gateway Interface Modules and Compatibility | 10
MTU Default and Maximum Values for Physical Interface Modules | 12
Power over Ethernet Support on SRX Series Services Gateway Interfaces | 15
SRX Series Services Gateway Interfaces Power and Heat Requirements | 17
Network Interface Specifications | 19
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface Specifications | 19
1-Port SFP Mini-Physical Interface Module Network Interface Specifications | 20
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications | 21
1-Port DOCSIS Mini-Physical Interface Module Network Interface Specifications | 22
1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications | 23
1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications | 25
8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications | 26
iii

8-Port Serial GPIM Interface Specifications | 27
Dual CT1/E1 GPIM Network Interface Specifications | 29
Quad CT1/E1 GPIM Network Interface Specifications | 30
Interface Module Descriptions
2
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module | 33
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview | 33
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features | 34
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications | 35
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs | 35
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported Modules | 36
1-Port SFP Mini-Physical Interface Module | 39
1-Port SFP Mini-Physical Interface Module Overview | 39
1-Port SFP Mini-Physical Interface Module Key Features | 40
1-Port SFP Mini-Physical Interface Module Hardware Specifications | 41
1-Port SFP Mini-Physical Interface Module LEDs | 42
1-Port SFP Mini-Physical Interface Module Supported Modules | 42
1-Port ADSL2+ Mini-Physical Interface Module | 45
1-Port ADSL2+ Mini-Physical Interface Module Overview | 45
1-Port ADSL2+ Mini-Physical Interface Module Key Features | 46
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications | 47
1-Port ADSL2+ Mini-Physical Interface Module LEDs | 48
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards | 48
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics | 49
1-Port DOCSIS Mini-Physical Interface Module | 51
1-Port DOCSIS Mini-Physical Interface Module Overview | 51
1-Port DOCSIS Mini-Physical Interface Module Key Features | 52
1-Port DOCSIS Mini-Physical Interface Module Hardware Specifications | 53
1-Port DOCSIS Mini-Physical Interface Module LEDs | 54
1-Port DOCSIS Mini-Physical Interface Module Supported Standards | 55
iv

1-Port G.SHDSL 8-Wire Mini-Physical Interface Module | 57
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview | 57
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features | 58
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications | 59
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs | 60
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards | 61
1-Port Serial Mini-Physical Interface Module | 62
1-Port Serial Mini-Physical Interface Module Overview | 62
1-Port Serial Mini-Physical Interface Module Key Features | 63
1-Port Serial Mini-Physical Interface Module Hardware Specifications | 63
1-Port Serial Mini-Physical Interface Module LEDs | 64
1-Port Serial Mini-Physical Interface Module Supported Standards | 65
1-Port T1/E1 Mini-Physical Interface Module | 66
1-Port T1/E1 Mini-Physical Interface Module Overview | 66
1-Port T1/E1 Mini-Physical Interface Module Key Features | 67
1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications | 67
1-Port T1/E1 Mini-Physical Interface Module LEDs | 68
1-Port T1/E1 Mini-Physical Interface Module Supported Standards | 69
1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics | 70
1-Port VDSL2 (Annex A) Mini-Physical Interface Module | 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview | 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features | 73
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Hardware Specifications | 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs | 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles | 75
1-Port Clear Channel DS3/E3 GPIM | 77
1-Port Clear Channel DS3/E3 GPIM Overview | 77
1-Port Clear Channel DS3/E3 GPIM Components | 78
1-Port Clear Channel DS3/E3 GPIM Key Features | 79
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications | 79
1-Port Clear Channel DS3/E3 GPIM LEDs | 80
v

1-Port Clear Channel DS3/E3 GPIM Supported Standards | 81
1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics | 81
2-Port 10-Gigabit Ethernet XPIM | 83
2-Port 10-Gigabit Ethernet XPIM Overview | 83
2-Port 10-Gigabit Ethernet XPIM Components | 84
2-Port 10-Gigabit Ethernet XPIM Key Features | 87
2-Port 10 Gigabit Ethernet XPIM Hardware Specifications | 88
2-Port 10 Gigabit Ethernet XPIM LEDs | 90
8-Port Gigabit Ethernet SFP XPIM | 92
8-Port Gigabit Ethernet SFP XPIM Overview | 92
8-Port Gigabit Ethernet SFP XPIM Components | 93
8-Port Gigabit Ethernet SFP XPIM Key Features | 94
8-Port Gigabit Ethernet SFP XPIM Hardware Specifications | 95
8-Port Gigabit Ethernet SFP XPIM LEDs | 96
8-Port Gigabit Ethernet SFP XPIM Supported Modules | 97
8-Port Serial GPIM | 99
8-Port Serial GPIM Overview | 99
8-Port Serial GPIM Components | 100
8-Port Serial GPIM Key Features | 101
8-Port Serial GPIM Hardware Specifications | 102
8-Port Serial GPIM LEDs | 103
16-Port Gigabit Ethernet XPIM | 104
16-Port Gigabit Ethernet XPIM Overview | 104
16-Port Gigabit Ethernet XPIM Components | 105
16-Port Gigabit Ethernet XPIM Key Features | 107
16-Port Gigabit Ethernet XPIM Hardware Specifications | 107
16-Port Gigabit Ethernet XPIM LEDs | 108
vi

24-Port Gigabit Ethernet XPIM | 111
24-Port Gigabit Ethernet XPIM Overview | 111
24-Port Gigabit Ethernet XPIM Components | 112
24-Port Gigabit Ethernet XPIM Key Features | 115
24-Port Gigabit Ethernet XPIM Hardware Specifications | 116
24-Port Gigabit Ethernet XPIM LEDs | 117
Dual CT1/E1 GPIM | 119
Dual CT1/E1 GPIM Overview | 119
Dual CT1/E1 GPIM Components | 120
Dual CT1/E1 GPIM Key Features | 121
Dual CT1/E1 GPIM Hardware Specifications | 121
Dual CT1/E1 GPIM LEDs | 122
Quad CT1/E1 GPIM | 123
Quad CT1/E1 GPIM Overview | 123
Quad CT1/E1 GPIM Components | 124
Quad CT1/E1 GPIM Key Features | 125
Quad CT1/E1 GPIM Hardware Specifications | 125
Quad CT1/E1 GPIM LEDs | 126
Cable Specifications and Pinouts
3
T1/E1 Mini-Physical Interface Module | 128
RJ-48 Connector to RJ-48 Connector (Straight) Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module | 128
RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts for the 1-Port T1/E1 Mini-Physical
Interface Module | 129
RJ-48 Connector to DB-15 Connector (Straight) Pinouts for the 1-Port T1/E1 Mini-Physical
Interface Module | 130
RJ-48 Connector to DB-15 Connector (Crossover) Pinouts for the 1-Port T1/E1 Mini-Physical
Interface Module | 132
ADSL2 + Mini-Physical Interface Module | 134
RJ-11 Connector Pinouts for the 1-Port ADSL2+ Mini-Physical Interface Module | 134
vii

G.SHDSL Mini-Physical Interface Module Cable Specifications | 135
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Cable Specifications | 135
VDSL2 Mini-Physical Interface Module Cable Specifications | 141
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications | 141
Serial Mini-Physical Interface Module Cable Specifications | 143
1-Port Serial Mini-Physical Interface Module Interface Cables | 143
EIA-530A DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 144
EIA-530A DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 145
RS-232 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 147
RS-232 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 148
RS-422/449 (EIA-449) DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 149
RS-422/449 (EIA-449) DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 150
V.35 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 152
V.35 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 153
X.21 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 155
X.21 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module | 155
Serial Gigabit-Backplane Physical Interface Module Cable Specifications | 157
8-Port Serial GPIM Interface Cables | 157
EIA-449 DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface Module | 159
EIA-449 DTE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface Module | 163
EIA-530 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 167
EIA-530 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 170
EIA-530A DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface Module | 174
EIA-530A DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 177
RS-232 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 180
RS-232 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 182
V.35 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 184
V.35 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 188
X.21 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 191
X.21 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 193
viii

Configuration
4
Configuring Mini-Physical Interface Modules | 196
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration | 196
Using the J-Web Interface | 197
Using the CLI | 198
1-Port SFP Mini-Physical Interface Module Basic Configuration | 199
Using the J-Web Interface | 200
Using the CLI | 201
1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration | 201
Using the J-Web Interface | 202
Using the CLI | 203
1-Port DOCSIS Mini-Physical Interface Module Basic Configuration | 204
Using the J-Web Interface | 204
Using the CLI | 205
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Basic Configuration | 206
1-Port Serial Mini-Physical Interface Module Basic Configuration | 207
Using the J-Web Interface | 207
Using the CLI | 208
1-Port T1/E1 Mini-Physical Interface Module Basic Configuration | 209
Using the J-Web Interface | 209
Using the CLI | 210
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration | 211
Using the J-Web Interface | 212
Using the CLI | 212
Configuring Gigabit-Backplane Physical Interface Modules | 214
1-Port Clear Channel DS3/E3 GPIM Basic Configuration | 214
Using the CLI | 214
2-Port 10-Gigabit Ethernet XPIM Basic Configuration | 217
Using the J-Web Interface | 217
Using the Point and Click CLI to Set Interface Mode and Speed Options | 218
ix

Using the CLI | 219
8-Port Gigabit Ethernet SFP XPIM Basic Configuration | 221
8-Port Serial GPIM Basic Configuration | 225
16-Port Gigabit Ethernet XPIM Basic Configuration | 229
24-Port Gigabit Ethernet XPIM Basic Configuration | 229
Using the J-Web Interface | 230
Using the CLI | 230
Dual CT1/E1 GPIM Basic Configuration | 232
Using the J-Web Interface | 232
Using the CLI to Configure the CT1 Interface | 233
Using the CLI to Configure the CE1 Interface | 234
Quad CT1/E1 GPIM Basic Configuration | 235
Using the J-Web Interface | 235
Using the CLI to Configure the CT1 Interface | 236
Using the CLI to Configure the CE1 Interface | 237
Mini-Physical Interface Module and Gigabit-Backplane Physical Interface Module
Operating Modes and Supported Modules | 239
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes | 239
Replacing Interface Modules
5
Overview of Replacing Interface Modules | 242
Required Tools and Parts for Replacing a Mini-Physical Interface Module | 242
Required Tools and Parts for Replacing a Gigabit-Backplane Physical Interface Module | 243
Preventing Electrostatic Discharge Damage to the SRX Series Services Gateway | 244
Replacing Mini-Physical Interface Modules | 246
Removing a Blank Mini-Physical Interface Module Faceplate from the SRX Series Services
Gateway | 246
Installing a Mini-Physical Interface Module in the SRX Series Services Gateway | 247
Removing a Mini-Physical Interface Module from the SRX Series Services Gateway | 249
x

Replacing Gigabit-Backplane Physical Interface Modules | 252
Installing a Blank Gigabit-Backplane Physical Interface Module Faceplate on the SRX Series Services
Gateway | 252
Removing a Blank Gigabit-Backplane Physical Interface Module Faceplate from the SRX Series
Services Gateway | 253
Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway | 253
Installing a Double-High, Double-Wide Gigabit-Backplane Physical Interface Module on the SRX
Series Services Gateway | 256
Removing a Gigabit-Backplane Physical Interface Module from the SRX Series Services
Gateway | 258
Contacting Customer Support and Returning Components | 261
Contacting Customer Support | 261
Return Procedure for SRX Series Services Gateway Hardware Components | 262
Locating the SRX Series Services Gateway Hardware Component Mini-PIM or GPIM Serial Number
Label | 263
SRX Series Services Gateway Mini-PIM Serial Number Label | 263
SRX Series Services Gateway GPIM Serial Number Label | 263
Information You Might Need to Supply to JTAC | 263
Required Tools and Parts for Packing the SRX Series Services Gateway Hardware Components | 264
Packing the SRX Series Services Gateway Hardware Components for Shipment | 264
Packing the Hardware Components for Shipment | 265
xi

About the Documentation
IN THIS SECTION
Documentation and Release Notes | xii
Using the Examples in This Manual | xii
Documentation Conventions | xiv
Documentation Feedback | xvii
Requesting Technical Support | xvii
Use this guide to understand the specifications and perform the basic configuration for the interface
modules supported on the SRX210, SRX220, SRX240, SRX550, and SRX650 Services Gateways. After
understanding the support and compatibility information, and completing the configuration procedures
covered in this guide, refer to the Junos OS documentation for information about further software
configuration.
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation, see the product
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the load merge or the load merge relative
command. These commands cause the software to merge the incoming configuration into the current
candidate configuration. The example does not become active until you commit the candidate configuration.
xii

If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example
isafull example. In this case, use the load merge command.
If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In
this case, use the load merge relative command. These procedures are described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following configuration to a file and name the file ex-script.conf. Copy the
ex-script.conf file to the /var/tmp directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2. Merge the contents of the file into your routing platform configuration by issuing the load merge
configuration mode command:
[edit]
user@host# load merge /var/tmp/ex-script.conf
load complete
xiii

Merging a Snippet
To merge a snippet, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the
ex-script-snippet.conf file to the /var/tmp directory on your routing platform.
commit {
file ex-script-snippet.xsl; }
2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode
command:
[edit]
user@host# edit system scripts
[edit system scripts]
3. Merge the contents of the file into your routing platform configuration by issuing the load merge
relative configuration mode command:
[edit system scripts]
user@host# load merge relative /var/tmp/ex-script-snippet.conf
load complete
For more information about the load command, see CLI Explorer.
Documentation Conventions
Table 1 on page xv defines notice icons used in this guide.
xiv

Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware
damage.
Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page xv defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type
the configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on
the terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS CLI User Guide
•RFC 1997, BGP Communities
Attribute
•Introduces or emphasizes important
new terms.
•Identifies guide names.
•Identifies RFC and Internet draft
titles.
Italic text like this
xv

Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
Configure the machine’s domain
name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for
which you substitute a value) in
commands or configuration
statements.
Italic text like this
•To configure a stub area, include
the stub statement at the [edit
protocols ospf area area-id]
hierarchy level.
•The console port is labeled
CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy
levels; or labels on routing platform
components.
Text like this
stub <default-metric metric>;Encloses optional keywords or
variables.
< > (angle brackets)
broadcast | multicast
(string1 |string2 |string3)
Indicates a choice between the
mutually exclusive keywords or
variables on either side of the symbol.
The set of choices is often enclosed
in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS
only
Indicates a comment specified on the
same line as the configuration
statement to which it applies.
# (pound sign)
community name members [
community-ids ]
Encloses a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identifies a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
GUI Conventions
xvi

Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
Represents graphical user interface
(GUI) items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of
menu selections.
>(bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback so that we can improve our documentation. You can use either
of the following methods:
•Online feedback system—Click TechLibrary Feedback, on the lower right of any page on the Juniper
Networks TechLibrary site, and do one of the following:
•Click the thumbs-up icon if the information on the page was helpful to you.
•Click the thumbs-down icon if the information on the page was not helpful to you or if you have
suggestions for improvement, and use the pop-up form to provide feedback.
•E-mail—Send your comments to [email protected]. Include the document or topic name,
URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance Center (JTAC).
If you are a customer with an active Juniper Care or Partner Support Services support contract, or are
xvii

covered under warranty, and need post-sales technical support, you can access our tools and resources
online or open a case with JTAC.
•JTAC policies—For a complete understanding of our JTAC procedures and policies, review the JTAC User
Guide located at https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•Product warranties—For product warranty information, visit https://www.juniper.net/support/warranty/.
•JTAC hours of operation—The JTAC centers have resources available 24 hours a day, 7 days a week,
365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called
the Customer Support Center (CSC) that provides you with the following features:
•Find CSC offerings: https://www.juniper.net/customers/support/
•Search for known bugs: https://prsearch.juniper.net/
•Find product documentation: https://www.juniper.net/documentation/
•Find solutions and answer questions using our Knowledge Base: https://kb.juniper.net/
•Download the latest versions of software and review release notes:
https://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications:
https://kb.juniper.net/InfoCenter/
•Join and participate in the Juniper Networks Community Forum:
https://www.juniper.net/company/communities/
•Create a service request online: https://myjuniper.juniper.net
To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) Tool:
https://entitlementsearch.juniper.net/entitlementsearch/
Creating a Service Request with JTAC
You can create a service request with JTAC on the Web or by telephone.
•Visit https://myjuniper.juniper.net.
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, see
https://support.juniper.net/support/requesting-support/.
xviii

1
PART
Overview
SRX Series Services Gateway Interface Modules Support | 2
Network Interface Specifications | 19

CHAPTER 1
SRX Series Services Gateway Interface Modules
Support
IN THIS CHAPTER
SRX Series Services Gateway Interface Overview | 2
Supported SRX Series Services Gateway Interfaces | 5
SRX Series Services Gateway Mini-Physical Interface Modules Overview | 6
SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules Overview | 7
SRX Series Services Gateway Interface Modules and Compatibility | 10
MTU Default and Maximum Values for Physical Interface Modules | 12
Power over Ethernet Support on SRX Series Services Gateway Interfaces | 15
SRX Series Services Gateway Interfaces Power and Heat Requirements | 17
SRX Series Services Gateway Interface Overview
Mini-Physical Interface Modules (Mini-PIMs) and Gigabit-Backplane Physical Interface Modules (GPIMs)
are field-replaceable network interface cards (NICs) supported on the Juniper Networks SRX Series Services
Gateway for the branch. You can easily insert or remove Mini-PIMs and GPIMs from the front slots of the
SRX Series Services Gateway chassis. The Mini-PIMs and GPIMs provide physical connections to a LAN
or a WAN. The Mini-PIMs and GPIMs receive incoming packets from the network and transmit outgoing
packets to the network. During this process, they perform framing and line-speed signaling for the medium
type. The SRX Series Services Gateways run Junos OS.
CAUTION: The Mini-PIMs available on the SRX Series Services Gateway are not
hot-swappable. You must power off the services gateway before removing or installing
Mini-PIMs.
2