Juniper CTP150 User manual

CTP150 Platform Hardware Documentation
Modified: 2015-11-22
Copyright © 2015, Juniper Networks, Inc.

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Copyright © 2015, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
CTP150 Platform Hardware Documentation
Copyright © 2015, Juniper Networks, Inc.
All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions of
that EULA.
Copyright © 2015, Juniper Networks, Inc.ii

Table of Contents
AbouttheDocumentation............................................xi
DocumentationandReleaseNotes..................................xi
DocumentationConventions.......................................xi
Documentation Feedback........................................xiii
RequestingTechnicalSupport.....................................xiv
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
OpeningaCasewithJTAC.....................................xiv
Part 1 Overview
Chapter1 CTP150PlatformOverview..........................................3
IntroducingCTPPlatforms............................................3
CTP150PlatformOverview............................................3
Chapter2 CTP150InterfaceModules...........................................7
CTP150SerialInterfaceModule.........................................7
CTP150MultiserviceInterfaceModule...................................8
CTP150T1/E1InterfaceModule.........................................9
CTP150ClockModule...............................................10
Part 2 Planning
Chapter 3 System Specifications and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CTP150PlatformSpecifications.......................................13
CTP150PlatformCertifications........................................15
Chapter 4 Planning and Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
BeforeYouInstallaCTPPlatform......................................17
CTP150EnvironmentalRequirements...................................17
Chapter5 EquipmentRackRequirements.....................................19
CTP150RackRequirements...........................................19
CTP150MechanicalRequirements.....................................19
CTP150SpaceRequirements.........................................20
CTP150RackInstallation.............................................20
CTPCablingRecommendations.......................................20
Chapter 6 Cable and Pinout Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CTP150 Interface Module HD-26 Connector Cable Pinouts . . . . . . . . . . . . . . . . . . 23
EIA-530 Connector Interface Signal Pinouts (DB-25 Female DCE) . . . . . . . . 23
EIA-530 Connector Interface Signal Pinouts (DB-25 Male DTE) . . . . . . . . . . 25
X.21 Connector Interface Signal Pinouts (DB-15 Female DCE) . . . . . . . . . . . . 26
X.21 Connector Interface Signal Pinouts (DB-15 Male DTE) . . . . . . . . . . . . . . 27
iiiCopyright © 2015, Juniper Networks, Inc.

V.24 Connector Interface Signal Pinouts (RJ-45 Male) . . . . . . . . . . . . . . . . . . 28
CTP150ConsoleCablePinouts........................................30
CTPFastEthernetandPowerCables...................................31
FastEthernetCables.............................................31
DCPowerCables................................................31
Part 3 Safety
Chapter 7 General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
CTPSafetyGuidelinesandWarnings...................................35
Chapter 8 Module Installation Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . 37
Safety Guidelines and Warnings for Installing CTP Modules . . . . . . . . . . . . . . . . . 37
Chapter9 HardwareCompliance.............................................39
Declaration of Conformity for the CTP150 Platform . . . . . . . . . . . . . . . . . . . . . . . 39
Federal Communications Commission (FCC) Statement . . . . . . . . . . . . . . . . . . . 40
FCC Requirements for Consumer Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Food and Drug Administration, Center for Devices and Radiological Health . . . . . 41
Compliance with Canadian Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
IndustryCanadaNotice..........................................42
IndustryCanadaNoticeCS-03.................................42
AvisCS-03d'IndustrieCanada.................................42
Canadian Department of Communications Explanatory Notes . . . . . . . . . . . 43
DOC Explanatory Notes: Equipment Attachment Limitations . . . . . . . . 43
Notes explicatives du ministère des Communications: limites visant les
accessoires.............................................44
Part 4 Installation
Chapter10 UnpackingandInspecting..........................................47
BeforeYouUnpacktheCTPPlatform...................................47
UnpackingtheCTPDevice............................................47
Inspecting Platform Components and Accessories . . . . . . . . . . . . . . . . . . . . . . . . 48
IfYouDetectorSuspectDamage......................................48
ContactingJuniperNetworks.........................................49
Chapter11 InstallingtheChassis..............................................51
Before You Install the CTP150 Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Installing the CTP150 Platform in Freestanding Mode . . . . . . . . . . . . . . . . . . . . . . 51
Installing the CTP150 Platform in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Chapter12 InstallingModules.................................................53
CTP150 Modules Slot and Port Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
ProtectingCTPModulesandSlots.....................................53
Required Tools and Safety Items for Installing CTP Modules . . . . . . . . . . . . . . . . 54
Installing a CTP Interface Module, Processor Module, or Clock Module . . . . . . . . 55
Removing a CTP Interface Module, Processor Module, or Clock Module . . . . . . . 55
Installing or Removing a CTP150 CompactFlash Card . . . . . . . . . . . . . . . . . . . . . . 56
Copyright © 2015, Juniper Networks, Inc.iv
CTP150 Platform Hardware Documentation

Chapter13 Cabling ..........................................................57
Cabling the CTP150 Platform Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Required Tools, Wires, and Cables for the CTP150 Platform . . . . . . . . . . . . . . . . . 57
CablingaCTP150InterfaceModule....................................58
CTP150FastEthernetCables.........................................59
Chapter 14 Accessing the CTP150 Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Setting Up Management Access to the CTP150 Platform . . . . . . . . . . . . . . . . . . . 61
Connecting Directly to the CTP150 Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Using HyperTerminal to Access the CTP150 Device . . . . . . . . . . . . . . . . . . . . . . . . 62
UsingSSHtoAccesstheCTPPlatform.................................62
Chapter 15 Powering On and Initially Configuring the CTP150 Platform . . . . . . . . . . . . 65
Before You Power On the CTP150 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
PoweringOntheCTP150Device.......................................66
Configuring the First Boot Script for the CTP150 Device . . . . . . . . . . . . . . . . . . . . 66
PoweringOfftheCTPPlatform.......................................68
Part 5 Maintenance
Chapter16 MaintainingComponents...........................................71
Required Tools for Maintaining the CTP Platform . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Storing CTP Modules and Other Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
CleaningtheCTPPlatform............................................72
ReplacinganACPowerSupply........................................72
Chapter 17 Product Reclamation and Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Product Reclamation and Recycling Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Chapter 18 Packing and Returning Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Return Procedure ...................................................77
Returning CTP Products for Repair or Replacement . . . . . . . . . . . . . . . . . . . . . . . . 77
Part 6 Troubleshooting
Chapter 19 Troubleshooting Power Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
CTPPlatformDoesNotPowerOn......................................81
CTPPlatformShutsDown............................................81
Chapter20 ContactingCustomerSupport......................................83
ContactingCustomerSupport........................................83
Locating CTP Component Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Information You Might Need to Supply to JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Part 7 Index
Index .........................................................87
vCopyright © 2015, Juniper Networks, Inc.
Table of Contents

Copyright © 2015, Juniper Networks, Inc.vi
CTP150 Platform Hardware Documentation

List of Figures
Part 1 Overview
Chapter1 CTP150PlatformOverview..........................................3
Figure1:CTP150Chassis(FrontView)...................................4
Figure2:CTP150Chassis(RearView)....................................5
Chapter2 CTP150InterfaceModules...........................................7
Figure 3: CTP150 Serial Interface Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 4: CTP150 Serial Multiservice Interface Module . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 5: CTP150 T1/E1 Interface Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Part 2 Planning
Chapter 6 Cable and Pinout Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 6: CTP150 Console Cable Pin Configurations . . . . . . . . . . . . . . . . . . . . . . . 30
Part 3 Safety
Chapter9 HardwareCompliance.............................................39
Figure 7: CTP150 Platform Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . 40
Part 5 Maintenance
Chapter16 MaintainingComponents...........................................71
Figure 8: Replacing an AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
viiCopyright © 2015, Juniper Networks, Inc.

Copyright © 2015, Juniper Networks, Inc.viii
CTP150 Platform Hardware Documentation

List of Tables
AbouttheDocumentation..........................................xi
Table1:NoticeIcons.................................................xii
Table2:TextandSyntaxConventions...................................xii
Part 2 Planning
Chapter 3 System Specifications and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 3: CTP150 Platform Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 4: CTP150 Platform Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 6 Cable and Pinout Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Table 5: EIA-530 Connector Interface Signals for HD-26 to Female DB-25 . . . . . 23
Table 6: EIA-530 Connector Interface Signals to Male DB-25 . . . . . . . . . . . . . . . . 25
Table 7: X.21 Connector Interface Signals for HD-26 to Female DB-15 . . . . . . . . . 26
Table 8: X.21 Connector Interface Signals for HD-26 to Male DB-15 . . . . . . . . . . . 27
Table 9: V.24 Connector Interface Signals for HD-26 to RJ-45 . . . . . . . . . . . . . . . 28
Table 10: CTP150 Series Console Cable Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Part 4 Installation
Chapter13 Cabling ..........................................................57
Table11:RequiredCables.............................................58
ixCopyright © 2015, Juniper Networks, Inc.

Copyright © 2015, Juniper Networks, Inc.x
CTP150 Platform Hardware Documentation

About the Documentation
•Documentation and Release Notes on page xi
•Documentation Conventions on page xi
•Documentation Feedback on page xiii
•Requesting Technical Support on page xiv
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation,
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at http://www.juniper.net/books.
Documentation Conventions
Table 1 on page xii defines notice icons used in this guide.
xiCopyright © 2015, Juniper Networks, Inc.

Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page xii defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type the
configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on the
terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS CLI User Guide
•RFC 1997, BGP Communities Attribute
•Introduces or emphasizes important
new terms.
•Identifies guide names.
•Identifies RFC and Internet draft titles.
Italic text like this
Configure the machine’s domain name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Italic text like this
Copyright © 2015, Juniper Networks, Inc.xii
CTP150 Platform Hardware Documentation

Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
•To configure a stub area, include the
stub statement at the [edit protocols
ospf area area-id] hierarchy level.
•The console port is labeled CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy levels;
or labels on routing platform
components.
Text like this
stub <default-metric metric>;Encloses optional keywords or variables.< > (angle brackets)
broadcast | multicast
(string1 |string2 |string3)
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS onlyIndicates a comment specified on the
same line as the configuration statement
to which it applies.
# (pound sign)
community name members [
community-ids ]
Encloses a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identifies a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
GUI Conventions
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
Represents graphical user interface (GUI)
items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of menu
selections.
>(bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can provide feedback by using either of the following
methods:
•Online feedback rating system—On any page at the Juniper Networks Technical
Documentation site at http://www.juniper.net/techpubs/index.html, simply click the
stars to rate the content, and use the pop-up form to provide us with information about
your experience. Alternately, you can use the online feedback form at
http://www.juniper.net/techpubs/feedback/.
xiiiCopyright © 2015, Juniper Networks, Inc.
About the Documentation

•E-mail—Send your comments to [e-mail]. Include the document
or topic name, URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance
Center (JTAC). If you are a customer with an active J-Care or Partner Support Service
support contract, or are covered under warranty, and need post-sales technical support,
you can access our tools and resources online or open a case with JTAC.
•JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•Product warranties—For product warranty information, visit
http://www.juniper.net/support/warranty/.
•JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides you with the
following features:
•Find CSC offerings: http://www.juniper.net/customers/support/
•Search for known bugs: http://www2.juniper.net/kb/
•Find product documentation: http://www.juniper.net/techpubs/
•Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/
•Download the latest versions of software and review release notes:
http://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications:
http://kb.juniper.net/InfoCenter/
•Join and participate in the Juniper Networks Community Forum:
http://www.juniper.net/company/communities/
•Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone.
•Use the Case Management tool in the CSC at http://www.juniper.net/cm/.
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
Copyright © 2015, Juniper Networks, Inc.xiv
CTP150 Platform Hardware Documentation

For international or direct-dial options in countries without toll-free numbers, see
http://www.juniper.net/support/requesting-support.html.
xvCopyright © 2015, Juniper Networks, Inc.
About the Documentation

Copyright © 2015, Juniper Networks, Inc.xvi
CTP150 Platform Hardware Documentation

PART 1
Overview
•CTP150 Platform Overview on page 3
•CTP150 Interface Modules on page 7
1Copyright © 2015, Juniper Networks, Inc.

Copyright © 2015, Juniper Networks, Inc.2
CTP150 Platform Hardware Documentation

CHAPTER 1
CTP150 Platform Overview
•Introducing CTP Platforms on page 3
•CTP150 Platform Overview on page 3
Introducing CTP Platforms
Juniper Networks CTP Series Circuit to Packet platforms provide advanced technology
and features required to reliably transport legacy time-division multiplexing (TDM) and
other circuit-based applications across next-generation IP networks. CTP platforms
create an IP packet flow from a serial data or analog voice connection at one end and
provide the necessary processing to re-create the serial bit stream or analog signal from
the received packet flow at the other end.
CTP platforms provide compact and lightweight chassis, high port density, and multiple
Ethernet interfaces. Each CTP platform runs the CTP operating system (CTPOS) and
can be managed by the Juniper Networks CTPView Network Management System, a
secure, Web-based management tool for provisioning, managing, running diagnostics,
monitoring, and reporting on all CTP devices and circuits in the network.
CTP150 Platform Overview
The Juniper Networks CTP150 Circuit to Packet platform is a 1-U high, full-rack wide
chassis designed for tabletop or shelf installation. It can also be installed in a rack with
the supplied rack-mounting kit. The CTP150 platform has two removable modules for
serial interfaces, T1/E1 interfaces, or both, and a removable Type II CompactFlash card,
but no hard drive. It is available in a removable AC-powered version only.
CAUTION: Do not remove CompactFlash cards from a running device. If you
remove the card while data is being written to or copied from the
CompactFlash card, data can be lost or corrupted. Therefore, we strongly
recommend that you shut down the device before removing or inserting a
CompactFlash card.
The front panel comprises the following components (see Figure 1 on page 4):
3Copyright © 2015, Juniper Networks, Inc.

•Power LED—Green when power is connected.
•CompactFlash LED—Solid amber when the CompactFlash drive is in use.
•Hardware LED—Quickly blinking red for a fan failure, slowly blinking red for the
removable AC power supply in use, and solid red when overheating.
•Serial console port—Provides access, by means of an RJ-45 connector, to the
command-line interface (CLI).
•Two traffic interface ports—Connect the appliance to your network, receiving and
forwarding traffic, over copper Ethernet 10/100/1000 interfaces.
•USB port.
•Slots for two removable interface modules in three versions:
•4-port serial interface
•4-port serial interface with multiservice daughter board
•4-port T1/E interface
NOTE: The module slots are numbered 0 and 1 from left to right. If only
one module is used, it must be inserted in slot 0. Also, any single clock
module must be connected to the CLK connector in the left-most module
slot 0.
Figure 1: CTP150 Chassis (Front View)
CTP150
g004480
CONSOLE ETH1 ETH0
Power
LED
Hardware
LED
Serial
Console port
Traffic
interfaces:
Two copper Ethernet ports
(10/100/1000 Mbps)
USB
port
Flash disk LED
Interface module slots
The rear panel comprises the following components (see Figure 2 on page 5):
•Removable CompactFlash drive—The device must be powered off when you insert or
remove the CompactFlash card. The CTP150 platform does not provide a hard drive,
nor is it required.
•Removable AC power supply—Power input using a standard IEC power cord.
•Fans—When the device is cool, the appliance fans spin at a slower speed to reduce
noise and save energy. As the device heats up, the fans run at a faster speed. In the
event of fan failure, the hardware LED blinks quickly and the remaining fan or fans run
at full speed until the failed fan is replaced. The fans for this model are not field
replaceable units (FRUs).
Figure 2 on page 5 shows the CompactFlash drive with the cover plate removed.
Copyright © 2015, Juniper Networks, Inc.4
CTP150 Platform Hardware Documentation