Jura ENA Micro 90 User manual

pt
es
nl
it
fr
ru
en
de
Instructions for use for ENA Micro 90

32
Table of contents
Your ENA Micro 90
Control elements 34
Important information 36
Proper use...............................................................................................................................................................36
For your safety .......................................................................................................................................................36
1 Preparing and using for the first time 38
JURA on the Internet .............................................................................................................................................38
3-colour plain text display....................................................................................................................................38
Setting up the machine........................................................................................................................................38
Filling the bean container ....................................................................................................................................39
First-time use..........................................................................................................................................................39
First-time use with filter cartridge activation ...................................................................................................39
First-time use without filter cartridge activation............................................................................................ 40
Determining the water hardness....................................................................................................................... 40
Connecting milk..................................................................................................................................................... 41
2 Preparation 41
Espresso, coffee...................................................................................................................................................... 41
Latte macchiato, cappuccino............................................................................................................................... 41
Milk foam ................................................................................................................................................................42
Ground coffee.........................................................................................................................................................42
Permanently setting the amount of water for the cup size...........................................................................43
Adjusting the grinder............................................................................................................................................43
Hot water.................................................................................................................................................................43
3 Daily operation 44
Filling the water tank ........................................................................................................................................... 44
Switching on the machine .................................................................................................................................. 44
Daily maintenance................................................................................................................................................ 44
Regular maintenance........................................................................................................................................... 44
Switching off the machine.................................................................................................................................. 44
4 Permanent settings in programming mode 45
Products ................................................................................................................................................................. 45
Setting the water hardness................................................................................................................................. 45
Automatic switch-off............................................................................................................................................ 46
Unit for amount of water .................................................................................................................................... 46
Language................................................................................................................................................................ 46
5 Maintenance 47
Rinsing the machine .............................................................................................................................................47
Rinsing the milk system .......................................................................................................................................47
Cleaning the milk system.................................................................................................................................... 48
Dismantling and rinsing the dual spout........................................................................................................... 48
Inserting and activating the filter ...................................................................................................................... 49
Changing the filter................................................................................................................................................ 50

33
pt
es
nl
it
fr
ru
en
de
Table of contents
Symbol description
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or WARNING
and a warning sign. The signal word WARNING draws your attention to potential
serious injury, and the signal word CAUTION to potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to perform
some action.
EInformation and tips to make it even easier to use your ENA.
READY Display
Cleaning the machine........................................................................................................................................... 51
Descaling the machine ........................................................................................................................................52
Descaling the water tank......................................................................................................................................53
Cleaning the bean container ...............................................................................................................................53
6 Display messages 54
7 Troubleshooting 55
8 Transport and environmentally friendly disposal 56
Transport/ Emptying the system ...................................................................................................................... 56
Disposal .................................................................................................................................................................. 56
9 Technical data 56
10 Index 57
11 JURA contact details/ Legal information 59

34
Control elements
Control elements
2
3
5
4
6
8
1
10
9
7
1 Water tank
2 Mains cable (back of the machine)
3 Milk pipe
4 Coffee grounds container
5 Drip tray
6 Bean container with aroma preservation cover
7 QOn/Off button
8 Hot-water spout
9 Height-adjustable dual spout
10 Cup grille

35
Control elements
pt
es
nl
it
fr
ru
en
de
8
10
3
4
1
2
7
9
11
5
6
12
13
1 Cover for powder chute for ground coffee
2 Powder chute for ground coffee
3 Display
4 éMilk Foam button
5 /Cappuccino button
6 (Latte Macchiato button
7 Rotary Switch status display
8 Cover cap for grinder adjustment switch
9 Grinder adjustment switch
10 Rotary Switch
11 xHot Water button
12 <Espresso button
13 >Coffee button
Accessories
Container for milk system
cleaning
Measuring spoon for ground
coffee
Filler funnel for ground coffee
6

36
Important information
Important information
Proper use
The machine is designed and
intended for private domestic use.
It should only be used for coffee
preparation and to heat milk and
water. Use for any other purpose
will be deemed improper. JURA
Elektroapparate AG cannot accept
any responsibility for the
consequences of improper use.
Before using the machine read these
instructions for use thoroughly and
completely and comply with the
instructions they contain. A warranty
service is not applicable for damage
or defects caused by non-compli-
ance with the instructions for use.
Keep these instructions for use close
to the machine and pass them on to
the next user.
For your safety
Please carefully read and observe
the important safety information
set out below.
To avoid danger of potentially fatal
electric shock:
UNever use a machine which is
damaged or has a defective
mains cable.
UIn the event of signs of damage,
for example if there is a smell of
burning, unplug the machine
immediately from the mains
supply and contact JURA service.
UFor models with a permanently
connected mains cable: If the
mains cable of this machine is
damaged, it must be repaired
either directly by JURA or by an
authorised JURA service centre.
UFor models with a disconnecta-
ble mains cable: If the mains
cable of this machine is dam-
aged it must be replaced with a
special mains cable, which is
available directly from JURA or
from authorised JURA service
centres.
UMake sure that the ENA and the
mains cable are not located close
to hot surfaces.
UBe careful to ensure that the
mains cable is not trapped and
does not rub against sharp
edges.
UNever open and repair the
machine yourself. Do not modify
the machine in any way that is
not described in these instruc-
tions for use. The machine
contains live parts. If opened,
there is a danger of potentially
fatal injury. Repairs may only be
carried out by authorised JURA
service centres, using original
spare parts and accessories.

37
Important information
pt
es
nl
it
fr
ru
en
de
UTo completely and safely
disconnect the machine from the
power supply, first switch off the
ENA using the On/Off button.
Only then should you remove
the mains plug from the power
socket.
There is a risk of scalds or burns on
the spouts.
UPlace the machine out of the
reach of children.
UDo not touch any hot parts. Use
the handles provided.
A defective machine is not safe and
could cause injury or fire. To avoid
damage and any associated risk of
injury or fire:
UNever allow the mains cable to
loosely hang down. The mains
cable could pose a tripping
hazard or become damaged.
UProtect the ENA from environ-
mental influences such as rain,
frost and direct sunlight.
UDo not immerse the ENA, mains
cable or connections in water.
UDo not put the ENA or any indi-
vidual parts in the dishwasher.
UBefore cleaning, switch your ENA
off with the On/Off button.
Always wipe the ENA with a
damp cloth rather than a wet
one, and protect it from pro-
longed exposure to water splash.
UOnly connect the machine to the
mains voltage in accordance with
the information on the rating
plate. The rating plate is located
on the underside of your ENA.
Further technical data is provided
in these instructions for use (see
Chapter 9 ‘Technical data’).
UConnect the ENA directly to a
domestic power socket. Using
multi-socket adapters or exten-
sion cords may cause overheat-
ing.
UPlease only use original JURA
maintenance products. Use of
products that are not explicitly
recommended by JURA could
damage the ENA.
UDo not use any coffee beans
treated with additives or cara-
melised coffee beans.
UOnly fill the water tank with
fresh, cold water.
USwitch the machine off with the
On/Off button if you are going to
be absent for a longer period of
time and remove the mains plug
from the power socket.
UChildren may not clean or ser-
vice the machine unless super-
vised by a responsible person.
UDo not allow children to play
with the machine.

38
1 Preparing and using for the first time
UKeep children under the age of 8
away from the machine, or
supervise them constantly.
UChildren aged 8 and over may
only operate the machine with-
out supervision if they have been
instructed in how to use it safely.
Children must be able to recog-
nise and understand the poten-
tial dangers arising from incor-
rect use.
People, including children, who
Udo not have the physical,
sensory or mental capabilities to
use the machine safely or
Uare inexperienced or lack knowl-
edge in how to use the machine
safely
must be supervised by a responsible
person when using it, or must be
instructed in how to use it correctly.
Safety when handling the CLARIS
Blue filter cartridge:
UFilter cartridges should be kept
out of the reach of children.
UStore filter cartridges in a dry
place in the sealed packaging.
UProtect cartridges from heat and
direct sunlight.
UDo not use damaged filter
cartridges.
UDo not open filter cartridges.
1 Preparing and using for the
first time
JURA on the Internet
Visit us on the Internet. On the JURA website
(www.jura.com) you will find interesting and
up-to-date information on your ENA and on every
aspect of coffee.
3-colour plain text display
Your ENA features a 3-colour plain text display. The
colours of the display texts have the following
meanings:
UGreen: The ENA is ready for use.
URed: The ENA is prompting you to perform
some action.
UYellow: You are in programming mode.
Setting up the machine
When setting up your ENA, please note the
following:
UPlace the ENA on a horizontal surface that is
not sensitive to water.
UChoose a spot for your ENA which protects the
machine against overheating. Ensure that the
ventilation slots are not covered.

39
1 Preparing and using for the first time
pt
es
nl
it
fr
ru
en
de
Filling the bean container
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), ground coffee or freeze-dried
coffee will damage the grinder.
T Only use roasted, untreated coffee beans to
fill the bean container.
TRemove the aroma preservation cover of the
bean container.
TRemove any dirt or foreign objects from
inside the bean container.
TFill the bean container with coffee beans.
TClose the bean container.
First-time use
When using the machine for the first time, you can
choose whether you want to operate ENA with or
without the CLARIS Blue filter cartridge. If the
water hardness is 10°dH or more, we recommend
using the filter cartridge. If you do not know the
hardness of your water, you can find this out first
(see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
J WARNING
If the machine is operated with a defective mains
cable, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged or
has a defective mains cable.
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
TPress the On/Off button Qto switch the
machine on.
SPRACHE DEUTSCH
TTurn the Rotary Switch until the required
language is displayed, for example
LANGUAGE ENGLISH.
TPress the Rotary Switch to confirm the
language setting.
OK, the language is now set.
FILTERp/ YESp
ENow decide whether you want to operate
your ENA with or without a CLARIS Blue
filter cartridge.
First-time use with filter cartridge
activation
TPress the Rotary Switch.
OK
INSERT FILTER
TRemove the water tank.
TOpen the filter holder.
TInsert the filter cartridge into the water tank,
exerting slight pressure.
TClose the filter holder. It will click into place
audibly.
EAfter two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.

40
1 Preparing and using for the first time
TFill the water tank with fresh, cold water and
reinsert it.
INSERT FILTER
TPlace a receptacle (at least 500ml) under the
hot-water and dual spout.
TPress the Rotary Switch.
FILTER RINSING, water flows out of
the hot-water spout.
EYou can interrupt rinsing of the filter at any
time by pressing any button. Press the
Rotary Switch to continue rinsing of the
filter.
EThe water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
SYSTEM FILLING, water flows out of
the dual spout.
HEATING
READY
First-time use without filter cartridge
activation
TTurn the Rotary Switch until FILTER-/
NO- is displayed.
TPress the Rotary Switch.
OK
16°dH
TTurn the Rotary Switch to change the water
hardness setting, e.g. to 25°dH.
T Press the Rotary Switch.
OK
FILL WATER TANK
TRemove the water tank.
TFill the water tank with fresh, cold water and
reinsert it.
PRESS ROTARY
TPlace a receptacle under the dual spout and
the hot-water spout.
TPress the Rotary Switch.
SYSTEM FILLING, the system fills up
with water.
HEATING
READY
Determining the water hardness
You can find out what the water hardness is by
using the Aquadur® test strip supplied as standard.
THold the test strip briefly (for one second)
under running water.
TShake off the water.
TWait for about one minute.
TYou will then be able to read the degree of
water hardness from the discolouration of
the Aquadur® test strip and the description
on the packaging.
The water hardness can now be set.

41
2 Preparation
pt
es
nl
it
fr
ru
en
de
Connecting milk
Your ENA creates fine, creamy, feather-light milk
foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 4–8°C. We would therefore
recommend using a milk cooler or a vacuum milk
container.
TRemove the protective cover of the dual
spout.
TConnect the milk pipe to the dual spout.
TConnect the other end of the milk pipe to a
milk container or immerse it in a milk
carton.
EEnsure that the filling height of the milk is
no higher than the milk pipe connection on
the dual spout.
2 Preparation
EYou can interrupt preparation at any time
while a speciality coffee, speciality coffee
with milk or hot water is being prepared. Just
press any button.
EBefore and during the grinding operation
you can change the coffee strength of
espresso <, coffee >, cappuccino /and
latte macchiato (by turning the Rotary
Switch.
EDuring preparation, you can change the
preset amounts (e.g. amount of milk foam
or water) by turning the Rotary Switch.
EYou can follow the current status of
preparation on the progress bar.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Products’).
Espresso, coffee
Preparation of espresso <and coffee >follows
this model.
Example:Proceed as follows to prepare one coffee.
Precondition:READY is displayed.
TPlace a cup under the dual spout.
> T Press the Coffee button to start preparation.
COFFEE, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
Latte macchiato, cappuccino
Your ENA can prepare a latte macchiato or
cappuccino at the touch of a button. There is no
need to move the glass or cup.
Latte macchiato (and cappuccino /are
prepared following this model.
Example:Proceed as follows to prepare one latte
macchiato.

42
2 Preparation
Precondition:READY is displayed. Milk is
connected to the dual spout.
TPlace a glass under the dual spout.
( T Press the Latte Macchiato button.
LATTE MAC., the milk foam is prepared.
Preparation stops automatically when the
preset amount of milk is reached.
PAUSE
EThere is a short interval while the hot milk
separates from the milk foam. This allows
the typical layers of a latte macchiato to
form. You can choose the length of this
interval in programming mode (see Chap-
ter 4 ‘Permanent settings in programming
mode – Products’).
LATTE MAC., coffee preparation starts.
The preset amount of water flows into the
glass.
Preparation stops automatically.
READY / M-RINSE
Milk foam
Precondition:READY is displayed. Milk is
connected to the dual spout.
TPlace a cup under the dual spout.
é T Press the Milk Foam button.
MILK, the milk foam is prepared.
Preparation stops automatically when the
preset amount of milk is reached.
READY / M-RINSE
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the powder
chute for ground coffee.
ENever add more than one level measuring
spoon of ground coffee.
EUse ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
EIf you did not fill the machine with a
sufficient amount of ground coffee, NOT
ENOUGH POWDER is displayed and the
ENA stops the operation.
EThe desired speciality coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the ENA stops the operation and
is once more ready for use.
The preparation of coffee, espresso, cappuccino
and latte macchiato with ground coffee follows this
model.
Example:Prepare a cup of coffee using ground
coffee.
Precondition:READY is displayed.
TPlace a cup under the dual spout.
TOpen the powder chute for ground coffee.
FILL POWDER
TPlace the filler funnel for ground coffee on
the powder chute.
TPlace one level measuring spoon of ground
coffee into the filler funnel.
TClose the powder chute for ground coffee.
SELECT BUTTON
> T Press the Coffee button to start preparation.
COFFEE, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY

43
2 Preparation
pt
es
nl
it
fr
ru
en
de
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all speciality coffees and hot
water according to the cup size. Adjust the amount
once as shown in the following example. Every
time you prepare a drink in the future, this amount
will be dispensed.
Example:Permanently adjust the amount of
cappuccino to the cup size.
Precondition:READY is displayed. Milk is
connected to the dual spout.
TPlace a cup under the dual spout.
/T Press and hold the Cappuccino button until
ENOUGH MILK? appears.
/T Release the Cappuccino button.
The milk foam is prepared.
TPress any button as soon as there is
sufficient milk foam in the cup.
OK
ENOUGH COFFEE?, the coffee flows
into the cup.
TPress any button as soon as there is
sufficient coffee in the cup.
OK, CAPPUCCINO, the set amounts for
one cappuccino are permanently stored.
READY
EYou can alter this setting at any time by
repeating the above procedure.
Adjusting the grinder
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
CAUTION
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T Only adjust the consistency of grind when
the grinder is running.
The consistency of grind is correct if the coffee
flows regularly from the dual spout. In addition a
fine, thick crema forms.
Example:Change the consistency of grind during
the preparation of an espresso.
TPlace a cup under the dual spout.
TOpen the cover cap of the grinder adjust-
ment switch.
< T Press the Espresso button to start prepara-
tion.
TTurn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
READY
Hot water
J CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
Precondition:READY is displayed.
TPlace a cup under the hot-water spout.
x T Press the Hot Water button.
WATER, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY

44
3 Daily operation
3 Daily operation
Filling the water tank
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
CAUTION
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
TRemove the water tank and rinse with cold
water.
TFill the water tank with fresh, cold water and
reinsert it.
Switching on the machine
TPlace a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine on.
RINSING, the system rinses itself. The
operation stops automatically.
READY
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
TRemove the drip tray.
TEmpty the coffee grounds container and
drip tray and rinse with warm water.
EAlways empty the coffee grounds container
when the machine is switched on. This is
the only way of resetting the coffee grounds
counter.
TReinsert the coffee grounds container and
the drip tray.
TRinse the water tank with clean water.
TDismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
TWipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre
cloth).
Regular maintenance
Carry out the following maintenance actions
regularly or as required:
UIn the interests of hygiene, we recommend
changing the milk pipe and interchangeable
milk spout on a regular basis (approximately
every 3 months). Replacements are available
from specialised dealers.
UClean the inside of the water tank, e.g. with a
brush. Further information about the water
tank is provided in these instructions for use
(see Chapter 5 ‘Maintenance – Descaling the
water tank’).
UTraces of milk and coffee may stick to the top
and bottom of the cup grille. If this happens,
clean the cup grille.
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a speciality coffee has been
prepared. If milk has been prepared, you will also
be prompted to clean the milk system.
Precondition:READY is displayed.
TPlace a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine off.

45
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
EIf milk has been prepared, you will be
prompted to clean the milk system
(M-CLEAN / START ?). After 10 seconds
the switch-off process continues automati-
cally.
RINSING, the system rinses itself. The
operation stops automatically. Your ENA is
switched off.
4 Permanent settings in pro-
gramming mode
Products
You can make the following permanent settings:
UEspresso
UAmount of water: 15ML – 80ML
UCoffee strength: 10 levels
UTemperature: NORMAL, HIGH
UCoffee
UAmount of water: 25ML – 240ML
UCoffee strength: 10 levels
UTemperature: NORMAL, HIGH
ULatte macchiato and cappuccino
UAmount of milk foam: 3SEC – 120SEC
UInterval: 0SEC – 60SEC
UCoffee strength: 10 levels
UAmount of water: 25ML – 240ML
UTemperature: NORMAL, HIGH
UMilk foam
UAmount of milk foam: 3SEC – 120SEC
UHot water
UAmount of water: 25ML – 450ML
Permanent settings in programming mode always
follow the same model.
Example:Permanently change the coffee strength
(FLAVOUR) of an espresso.
Precondition:READY is displayed.
TPress and hold the Rotary Switch until
RINSE appears.
TTurn the Rotary Switch until PRODUCT is
displayed.
TPress the Rotary Switch to enter the
programme item.
SELECT BUTTON
ENext select the button of the product for
which you would like to make settings. No
product is prepared at this point.
< T Press the Espresso button.
ESPRESSO
WATER
TTurn the Rotary Switch until FLAVOUR is
displayed.
TPress the Rotary Switch to enter the
programme item.
nnnnnnkkkk (Example)
TTurn the Rotary Switch to change the
setting.
TPress the Rotary Switch to confirm the
setting.
OK, the coffee strength is now set.
FLAVOUR
TTurn the Rotary Switch until EXIT is
displayed.
TPress the Rotary Switch to exit the pro-
gramme item.
PRODUCT
TTurn the Rotary Switch until EXIT is
displayed.
TPress the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
EIf you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.

46
4 Permanent settings in programming mode
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
Precondition:READY is displayed.
TPress and hold the Rotary Switch until
RINSE appears.
TTurn the Rotary Switch until HARDNESS
is displayed.
TPress the Rotary Switch to enter the
programme item.
16°dH (Example)
TTurn the Rotary Switch to change the
setting.
TPress the Rotary Switch to confirm the
setting.
OK, the water hardness is now set.
HARDNESS
TTurn the Rotary Switch until EXIT is
displayed.
TPress the Rotary Switch to exit programming
mode.
READY
Automatic switch-off
By instructing your ENA to automatically switch
itself off, you can cut down your energy consump-
tion. If this function is activated, your ENA switches
off automatically after the preset time following
the last action on the machine.
The automatic switch-off can be set to between
15minutes and 9hours.
Precondition:READY is displayed.
TPress and hold the Rotary Switch until
RINSE appears.
TTurn the Rotary Switch until OFF AFTER
is displayed.
TPress the Rotary Switch to enter the
programme item.
2HRS (Example)
TTurn the Rotary Switch to change the
setting.
TPress the Rotary Switch to confirm the
setting.
OK, the switch-off time is now set.
OFF AFTER
TTurn the Rotary Switch until EXIT is
displayed.
TPress the Rotary Switch to exit programming
mode.
READY
Unit for amount of water
You can change the unit for the amount of water
from ‘ml’ to ‘oz’.
Precondition:READY is displayed.
TPress and hold the Rotary Switch until
RINSE appears.
TTurn the Rotary Switch until DISPLAY is
displayed.
TPress the Rotary Switch to enter the
programme item.
ML (Example)
TTurn the Rotary Switch to change the
setting.
TPress the Rotary Switch to confirm the
setting.
OK, the unit for the amount of water is now
set.
DISPLAY
TTurn the Rotary Switch until EXIT is
displayed.
TPress the Rotary Switch to exit programming
mode.
READY
Language
In this programme item you can set the language
used by your ENA.
Example:Change the language from ENGLISH
to DEUTSCH.
Precondition:READY is displayed.

47
5 Maintenance
pt
es
nl
it
fr
ru
en
de
TPress and hold the Rotary Switch until
RINSE appears.
TTurn the Rotary Switch until LANGUAGE
is displayed.
TPress the Rotary Switch to enter the
programme item.
ENGLISH
TTurn the Rotary Switch until DEUTSCH is
displayed.
TPress the Rotary Switch to confirm the
setting.
OK, the language is now set.
SPRACHE
TTurn the Rotary Switch until EXIT is
displayed.
TPress the Rotary Switch to exit programming
mode.
BEREIT
5 Maintenance
Your ENA has the following integrated mainte-
nance programmes:
URinsing the machine (RINSE)
URinsing the milk system in the dual spout
(M-RINSE)
UCleaning the milk system in the dual spout
(M-CLEAN)
UChanging the filter (FILTER) (only if filter is
activated)
UCleaning the machine (CLEAN)
UDescaling the machine (DE-SCALE)
EClean or descale the machine, rinse the milk
system or change the filter when you are
prompted to do so.
EIn the interests of hygiene, you should clean
the milk system daily when you have been
preparing milk.
EYou can start the maintenance programmes
at any time in programming mode
(programme item RINSE).
Rinsing the machine
Precondition:READY is displayed.
TPlace a receptacle under the dual spout.
TPress and hold the Rotary Switch until
RINSE appears.
TPress the Rotary Switch to enter the
programme item.
M-CLEAN
TTurn the Rotary Switch until RINSE is
displayed.
TPress the Rotary Switch to initiate the rinse
operation.
RINSING, the system rinses itself. The
operation stops automatically.
READY
Rinsing the milk system
After each milk preparation, the ENA prompts you
to perform a milk system rinse.
Precondition:READY / M-RINSE is displayed.
TPlace a receptacle under the dual spout.
TPress the Rotary Switch to start milk system
rinsing.
RINSING, the milk system is rinsed. The
rinse stops automatically. READY appears
on the display.

48
5 Maintenance
Cleaning the milk system
To ensure that the milk system in the dual spout
always works properly, you must clean it daily
when you have been preparing milk.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the milk.
T Use only original JURA maintenance
products.
EJURA milk system cleaner is available from
specialised dealers.
ETo clean the milk system, use the container
supplied.
TPress and hold the Rotary Switch until
RINSE appears.
TPress the Rotary Switch to enter the
programme item.
M-CLEAN
TPress the Rotary Switch to start milk system
cleaning.
AGENT FOR M-CLEAN
TRemove the milk pipe from the milk
container or carton.
TFill the front part of the container (indicated
by 6) with 250ml fresh water and 1 capful
of milk system cleaner.
TPlace the container under the dual spout.
6
TConnect the milk pipe to the container.
ETo connect the milk pipe to the container
correctly, the pipe must be fitted with a
connector.
TPress the Rotary Switch.
CLEANING, the milk system and the pipe
are cleaned.
The operation is interrupted, WATER FOR
M-CLEAN.
TRinse the container thoroughly and fill the
front part with 250ml fresh water.
TPlace the container under the dual spout
and connect the milk pipe with the container
again.
TPress the Rotary Switch.
CLEANING, the milk system and the pipe
are rinsed with fresh water.
The operation stops automatically.
READY
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene.
TRemove the milk pipe and rinse thoroughly
under running water.

49
5 Maintenance
pt
es
nl
it
fr
ru
en
de
TPress the releasing devices and pull the dual
spout down and off.
TPush the milk system down and remove it.
TDismantle the milk system into its individual
parts.
TRinse all parts under running water. If a lot of
milk residue has dried on, first soak the
individual parts in a solution of 250ml of
cold water and 1capful of JURA milk system
cleaner and then rinse thoroughly.
TFit the air intake pipe.
TReassemble the milk system, noting the
numbering on the parts.
TInsert the assembled individual parts into
the dual spout and press them together.
They will click into place audibly.
TFit the dual spout on the machine. It will
click into place audibly.
Inserting and activating the filter
Your ENA no longer has to be descaled if you are
using the CLARIS Blue filter cartridge. If you did not
activate the filter cartridge the first time you used
the machine, you can do this now as follows.
EPerform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your ENA always produces its best.
Precondition:READY is displayed.
TPress and hold the Rotary Switch until
RINSE appears.
TTurn the Rotary Switch until FILTER- is
displayed.
TPress the Rotary Switch to enter the
programme item.
NO-
1
2

50
5 Maintenance
TTurn the Rotary Switch until YESp is
displayed.
TPress the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
TRemove and empty the water tank.
TOpen the filter holder.
TInsert the filter cartridge into the water tank,
exerting slight pressure.
TClose the filter holder. It will click into place
audibly.
EAfter two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
TFill the water tank with fresh, cold water and
reinsert it.
TPlace a receptacle (at least 500ml) under the
hot-water spout.
TPress the Rotary Switch.
FILTER RINSING, water flows out of
the hot-water spout.
EYou can interrupt rinsing of the filter at any
time by pressing any button. Press the
Rotary Switch to continue rinsing of the
filter.
EThe water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
HEATING
READY
The filter is now activated.
Changing the filter
EAfter 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
EAfter two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
EIf the CLARIS Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:FILTER/ READY is displayed.
TPress the Rotary Switch.
INSERT FILTER
TRemove and empty the water tank.
TOpen the filter holder and remove the old fil-
ter cartridge.
TInsert a new filter cartridge into the water
tank, exerting slight pressure.
TClose the filter holder. It will click into place
audibly.
TFill the water tank with fresh, cold water and
reinsert it.