Jura IMPRESSA XJ9 Professional User manual

IMPRESSA XJ9 Professional Instructions for Use
JURA Type 683
KOriginal instructions for use
Before using the machine read the instructions for use.
E

2
Table of contents
Your IMPRESSA XJ9 Professional
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Settings by the JURA service technician...................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the water tank....................................................................................................................................11
Filling the bean container............................................................................................................................11
First-time use ................................................................................................................................................12
Determining the water hardness ..............................................................................................................14
Adjusting the grinder ..................................................................................................................................15
Connecting milk...........................................................................................................................................15
2 Preparation 16
Ways of preparing a beverage ...................................................................................................................16
Espresso and coffee.....................................................................................................................................17
Preparing two speciality coffees................................................................................................................17
Latte macchiato, cappuccino .....................................................................................................................18
Warm milk and milk foam..........................................................................................................................18
Ground coffee...............................................................................................................................................19
Permanently setting the amount of water for the cup size ................................................................20
Hot water.......................................................................................................................................................21
3 Daily operation 22
Switching on ................................................................................................................................................22
Daily maintenance......................................................................................................................................22
Switching off ................................................................................................................................................23
4 Permanent settings in programming mode 24
Enabling and disabling programming mode.........................................................................................25
Product settings ..........................................................................................................................................26
Enable or disable one-off settings ...........................................................................................................27
Enabling and disabling product selector view.......................................................................................28
Enabling and disabling products .............................................................................................................29
Maintenance settings.................................................................................................................................29
Setting the water hardness .......................................................................................................................30
Energy-saving mode ...................................................................................................................................31
Automatic switch-off ..................................................................................................................................32
Unit for amount of water...........................................................................................................................32
Restore factory settings ............................................................................................................................. 33
Language......................................................................................................................................................34
Background colour......................................................................................................................................34
Querying information ................................................................................................................................35

3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention to
potential serious injury, and the signal word CAUTION to potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your IMPRESSA.
‘Espresso’ Display
Symbol description
5 Maintenance 36
Rinsing the machine...................................................................................................................................36
Rinsing the cappuccino frother ................................................................................................................ 37
Cleaning the cappuccino frother.............................................................................................................. 37
Dismantling and rinsing the cappuccino frother ..................................................................................38
Inserting and activating the filter.............................................................................................................38
Changing the filter......................................................................................................................................39
Cleaning the machine .................................................................................................................................41
Descaling the machine ..............................................................................................................................42
Cleaning the bean container.....................................................................................................................44
Descaling the water tank ...........................................................................................................................44
6 Display messages 45
7 Troubleshooting 46
8 Transport and environmentally friendly disposal 48
Transport/ Emptying the system.............................................................................................................48
Disposal.........................................................................................................................................................48
9 Technical data 49
10 Index 50
11 JURA contact details/ Legal information 56

4
Control elements
Control elements
1 Bean container with aroma preservation
cover
2 Water tank cover
3 Water tank
4 Height-adjustable cappuccino frother
5 Coffee grounds container
6 Drip tray
7 Cup grille
8 Filler funnel for ground coffee
9 Storage compartment cover
10 Grinder adjustment switch
11 Measuring spoon for ground coffee
12 Hot-water nozzle
13 Height- and width-adjustable coffee spout
3
2
7
6
8
9
10
11
12
5
13
1
4

5
Control elements
31 2
4
5
Top of the machine
1 QOn/Off button
2 gRotary Switch
3 OP button (programming)
Front
4 Display
5 Buttons (button function depends on
what is shown in the display)
31
2
Back of the machine
1 Power switch
2 Mains cable
3 Port (under cover)

6
Important information
Important information
This machine is intended for use by specialist or
trained staff in businesses, light industry and agri-
cultural facilities or for commercial use by non-pro-
fessionals. It should only be used for coffee prepa-
ration and to heat milk and water. Use for any other
purpose will be deemed improper. JURA Elektroap-
parate AG cannot accept any responsibility for the
consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
The IMPRESSA may only be operated by instructed
persons. Non-professionals must be supervised
during use.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and con-
tact JURA service.
UIf the mains cable of this machine is damaged,
it must be repaired either directly by JURA or by
an authorised JURA service centre.
Proper use
For your safety
J

7
Important information
UMake sure that the IMPRESSA and the mains
cable are not located close to hot surfaces.
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch
off the IMPRESSA using the On/Off button and
then at the power switch. Only then should
you remove the mains plug from the power
socket.
There is a risk of scalds or burns on the spouts and
the cappuccino frother.
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
UEnsure that the cappuccino frother is correctly
fitted and clean. If incorrectly fitted or if they
become blocked, the cappuccino frother or its
parts might come off.

8
Important information
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
UProtect the IMPRESSA from environmental
influences such as rain, frost and direct sun-
light.
UDo not immerse the IMPRESSA, mains cable or
connections in water.
UDo not put the IMPRESSA or any individual
parts in the dishwasher.
USwitch your IMPRESSA off at the power switch
before any cleaning operation. Always wipe
the IMPRESSA with a damp cloth rather than a
wet one, and protect it from prolonged expo-
sure to water splash.
UThe IMPRESSA is not suitable for installation
on a surface where a jet of water can be used.
UThe machine must not be cleaned with a jet of
water.
UOnly connect the machine to the mains vol-
tage in accordance with the information on
the rating plate. The rating plate is located on
the underside of your IMPRESSA. Further tech-
nical data is provided in these instructions for
use (see Chapter 9 ‘Technical data’).
UPlease only use original JURA maintenance
products. Use of products that are not expli-
citly recommended by JURA could damage the
IMPRESSA.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.

9
Important information
UOnly fill the water tank with fresh, cold water.
USwitch the machine off at the power switch if
you are going to be absent for a longer period
of time.
UChildren may not clean or service the machine
unless supervised by a responsible person.
UDo not allow children to play with the machine.
UKeep children under the age of 8 away from
the machine, or supervise them constantly.
UChildren aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Child-
ren must be able to recognise and understand
the potential dangers arising from incorrect
use.
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Pro Blue filter
cartridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct sun-
light.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet.
On the JURA website (www.jura.com) you will find interesting and
up-to-date information on your IMPRESSA and on every aspect of
coffee.
The following settings can only be made by the JURA service techni-
cian:
USetting the filter capacity
You can also obtain the following optional accessories for your
IMPRESSA from your JURA service partner:
UCoffee grounds disposal function set
UDrip drain set
UPermanent water connection kit
UPayment system and other accessories
If the machine is not lifted properly, it may be damaged.
T Do not lift the machine by the bean container.
T Only lift the machine by gripping it underneath, in the reces-
ses on the left and right sides of the machine.
When setting up your IMPRESSA, please note the following:
UPlace the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
UChoose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
JURA on the Internet
Settings by the JURA
service technician
Setting up the machine
CAUTION

11
1 Preparing and using for the first time
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
TOpen the bean container cover and remove the aroma pre-
servation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
Filling the water tank
CAUTION
Filling the bean container
CAUTION

12
1 Preparing and using for the first time
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Pro Blue
filter cartridge. If the water hardness is 10°dH or more, we recom-
mend using the filter cartridge. If you do not know the hardness of
your water, you can find this out first (see Chapter 1 ‘Preparing and
using for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition:The water tank and bean container have been filled.
TInsert the mains plug into a power socket.
 3 TSwitch on the IMPRESSA using the power switch on the back
of the machine.
 Q TPress the On/Off button to switch the IMPRESSA on.
The display shows the languages you can choose from.
ETo display more languages, press the ‘Next’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Filter’
ENow decide whether you want to operate your IMPRESSA with
or without a CLARIS Pro Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Active’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
TRemove and empty the water tank.
First-time use
JWARNING
Activating the filter
CAUTION

13
1 Preparing and using for the first time
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
TPlace a receptacle under the cappuccino frother, the coffee
spout and the hot-water nozzle.
TPress the ‘Next’ button.
‘Filter is being rinsed.’, water flows out of the hot-water
nozzle.
EYou can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchkto continue rinsing of
the filter.
EThe water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically.
‘System is filling.’, the system fills up with water. Water flows
out of the cappuccino frother and the hot-water nozzle. The
operation stops automatically.
‘Welcome to JURA’
‘Machine is rinsing.’, the machine rinses. The operation stops
automatically. ‘Please select product:’ appears on the display.
Your IMPRESSA is ready for use.
EThe display shows the products you can prepare.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Inactive’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’
Deactivating the filter
CAUTION

14
1 Preparing and using for the first time
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TPress the ‘<’ or ‘>’ button to set the water hardness.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Welcome to JURA’
‘Please press the Rotary Switch.’
TPlace a receptacle under the cappuccino frother and another
under the hot-water nozzle.
 k TPress the Rotary Switch.
‘System is filling.’, the system fills up with water. Water flows
out of the cappuccino frother and the hot-water nozzle. The
operation stops automatically.
‘Welcome to JURA’ appears on the display.
‘Machine is heating.’
‘Please press the Rotary Switch.’, the Rotary Switch lights up.
TPlace a receptacle under the coffee spout.
 k TPress the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation stops
automatically. ‘Please select product:’ appears on the display.
Your IMPRESSA is ready for use.
EThe display shows the products you can prepare.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
TWait for about one minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
Determining the water
hardness

15
1 Preparing and using for the first time
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not ope-
rating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
TOpen the storage compartment cover.
TPlace a cup under the coffee spout.
TPress the ‘Espresso’ button.
The grinder starts up. ‘Espresso’ is displayed.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
TClose the storage compartment cover.
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 4–8°C. We would therefore recom-
mend using a milk cooler.
TAttach the milk pipe to the cappuccino frother. To do this,
attach the end of the milk pipe to the connector on the left-
hand side of the cappuccino frother.
TConnect the other end of the milk pipe to a milk cooler.
Adjusting the grinder
CAUTION
Connecting milk

16
2 Preparation
2 Preparation
EYou can stop preparation of a speciality coffee, speciality cof-
fee with milk or hot water at any time. Just press any button.
EDuring the grinding operation you can select the coffee
strength of individual products by turning the Rotary
Switchg: ;(extra-mild), ;; (mild), ;;; (normal), ;;;; (strong)
or ;;;;; (extra-strong).
EDuring preparation, you can change the preset amount of
water by turning the Rotary Switch gor pressing the ‘<’ and
‘>’ buttons.
EYou can follow the current status of preparation on the display.
In programming mode you can enable or disable one-off settings
during preparation (see Chapter 4 ‘Permanent settings in program-
ming mode – Enable or disable one-off settings’).
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
Only some of the speciality coffees you can prepare are shown on
the display at any one time. As soon as you turn the Rotary Switch,
more speciality coffees are displayed in the product selector. The
product selector disappears automatically after 5 seconds if no pre-
paration is started.
The following speciality coffees are displayed as standard:
U‘Espresso’
U‘Coffee’
U‘Cappuccino’
U‘Latte macchiato’
U‘Hot water’
U‘1 portion milk’
Additional speciality coffees in the product selector:
U‘Ristretto’
U‘2 espressi’
U‘2 coffees’
U‘2 ristretti’
Ways of preparing a
beverage

17
2 Preparation
‘Espresso’ and ‘Coffee’ are prepared following this model.
Example:Proceed as follows to prepare one coffee.
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. ‘Please select product:’
appears on the display.
To prepare two speciality coffees, either use the product selector or
press the appropriate preparation button twice (within approximately
2 seconds).
Example:Proceed as follows to prepare two coffees (using product
selector).
TPlace two cups under the coffee spout.
 g TTurn the Rotary Switch to view the product selector.
 g TTurn the Rotary Switch until ‘2 coffees’ is displayed.
 k TPress the Rotary Switch.
Coffee preparation starts. The preset amount of water for
coffee flows into the cups.
Preparation stops automatically. ‘Please select product:’
appears on the display.
EProceed as follows to prepare two cups of coffee at the touch
of a button: Place two cups under the coffee spout. Press the
‘Coffee’ button twice (within approximately 2 seconds) to
start coffee preparation.
Espresso and coffee
Preparing two speciality
coffees

18
2 Preparation
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
TPlace a glass under the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
TPress the ‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
EThere is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Product settings’).
Coffee preparation starts. The preset amount of water flows
into the glass. Preparation stops automatically. ‘Please select
product:’ appears on the display.
To make sure the cappuccino frother always works properly, you
must rinse and clean it regularly (see Chapter 5 ‘Maintenance – Rin-
sing the cappuccino frother’).
Example:Proceed as follows to prepare milk foam.
Precondition:‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
TPlace a cup under the cappuccino frother.
TTurn the setting wheel of the cappuccino frother to the Milk
Foam positionü.
EIf you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk positionz.
Latte macchiato,
cappuccino
Warm milk and milk
foam

19
2 Preparation
TPress the ‘1 portion milk’ button.
The machine heats up.
‘1 portion milk’, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk foam is
reached. ‘Please select product:’ appears on the display.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cap-
puccino frother’).
You can choose to use a second coffee variety, for example decaffe-
inated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the IMPRESSA stops the operation.
EThe desired speciality coffee must be prepared within appro-
ximately one minute after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation and is once
more ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
TPlace an espresso cup under the coffee spout.
TOpen the cover of the filler funnel for ground coffee.
‘Please add ground coffee.’
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
‘Please select product:’
Ground coffee

20
2 Preparation
TPress the ‘Espresso’ button.
Preparation starts. The preset amount of water for espresso
flows into the cup. Preparation stops automatically. ‘Please
select product:’ appears on the display.
It is easy to make permanent settings for the amount of water for all
speciality coffees and hot water according to the cup size. Adjust the
amount once as shown in the following example. Every time you
prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Example:Proceed as follows to permanently set the amount of water
for one coffee.
Precondition:‘Please select product:’ is displayed.
TPlace a cup under the coffee spout.
TPress and hold the ‘Coffee’ button.
‘Coffee’ and the fill volume are displayed.
THold the ‘Coffee’ button down until ‘Enough water? Press
button’ appears.
TRelease the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
TPress any button as soon as there is sufficient coffee in the
cup.
Preparation stops. ‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’ appears on the display.
EYou can alter this setting at any time by repeating the above
procedure.
EYou can also permanently set the amount for all speciality cof-
fees, hot water and milk in programming mode (see Chapter4
‘Permanent settings in programming mode – Product set-
tings’).
Permanently setting the
amount of water for the
cup size