Jura IMPRESSA E80 User manual

E8/E80 Instructions for Use
KFor your safety: read and understand manual before use.
E
Figure: Your machine may look
different to the one shown.

2
Table of contents
Your E8/E80
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
Determining the water hardness ..............................................................................................................10
First-time use .................................................................................................................................................11
Connecting milk...........................................................................................................................................13
Connect accessory (with wireless connection) .......................................................................................13
2 Preparation 15
Latte macchiato, cappuccino and other specialty coffees with milk..................................................16
Ristretto, espresso and coffee....................................................................................................................16
Two ristretti, two espressi and two coffees .............................................................................................17
Espresso doppio ...........................................................................................................................................17
Warm milk and milk foam..........................................................................................................................17
Ground coffee...............................................................................................................................................18
Permanently setting the amount of water for the cup size .................................................................19
Adjusting the grinder .................................................................................................................................20
Hot water......................................................................................................................................................20
3 Daily operation 21
Filling the water tank...................................................................................................................................21
Switching on the machine..........................................................................................................................21
Daily maintenance.......................................................................................................................................21
Regular maintenance .................................................................................................................................22
Switching off the machine.........................................................................................................................22
4 Permanent settings in programming mode 23
Adjusting the product settings.................................................................................................................24
Automatic switch-off..................................................................................................................................25
Setting the water hardness .......................................................................................................................26
Milk system rinsing.....................................................................................................................................26
Unit for amount of water...........................................................................................................................27
Language......................................................................................................................................................27
5 Maintenance 28
Rinsing the machine...................................................................................................................................28
Rinsing the fine foam frother....................................................................................................................29
Cleaning the fine foam frother.................................................................................................................29
Dismantling and rinsing the professional fine foam frother................................................................31
Dismantling and rinsing the fine foam frother......................................................................................32
Inserting/changing the filter...................................................................................................................... 32
Cleaning the machine ................................................................................................................................33
Descaling the machine ..............................................................................................................................34
Cleaning the bean container..................................................................................................................... 37
Descaling the water tank........................................................................................................................... 37

3
Table of contents
These instructions for use apply to the following models:
UE8
UE80
In the interests of clarity, however, the instructions for use only refer
to the ‘E8’ model.
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
J CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your E8.
‘Coffee’ Display message
Scope of validity
J
J DANGER
J WARNING
6 Display messages 38
7 Troubleshooting 39
8 Transport and environmentally friendly disposal 40
Transport/ Emptying the system.............................................................................................................40
Disposal.........................................................................................................................................................40
9 Technical data 41
10 Index 42
11 JURA contact details/ Legal information 44

4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
When using electrical appliances, basic safety precautions shall
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
ZRead all instructions.
ZDo not touch hot surfaces. Use handles or knobs.
ZTo protect against fire, electric shock and injury to persons, do
not immerse power cord, plugs, or body of machine in water
or other liquid.
ZClose supervision is necessary when any appliance is used by
or near children.
ZUnplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
ZDo not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
ZThe use of an accessory attachment not recommended by the
appliance manufacturer may result in fire, electric shock, or
injury to persons.
ZDo not use outdoors.
ZDo not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
ZDo not place on or near a hot gas or electric burner, or in a
heated oven.
ZTo disconnect, turn any control to ‘OFF’ then remove plug
from wall outlet.
ZDo not use appliance for other than intended use.
ZUse extreme caution when dispensing hot steam, hot water
or hot coffee.
Follow the basic safety
precautions

5
IMPORTANT SAFEGUARDS
The appliance is designed and intended for household use only. It
shall only be used for coffee preparation and to heat milk and water,
according to these instructions. Use for any other purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
People, including children, who
Zdo not have the physical, sensory or mental capabilities to use
the appliance safely or
Zare inexperienced or lack knowledge in how to use the
appliance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
ZA short power-supply cord is to be provided to reduce risks
resulting from becoming entangled in or tripping over a
longer cord.
ZThe cord shall be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children
or tripped over.
ZThis appliance has a 3-pin grounded plug.
ZDo not modify the plug in any way.
Extension cords are available an may be used if care is exercised in
their use.
If the user chooses to use an extension cord,
Zthe marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance, and
Zif the appliance is of the grounded type, the extension cord
should be a grounding type 3-wire cord, and
Zthe longer cord should be arranged so that it will not drape
over the counter top or tabletop where it can be pulled on by
children or tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any
service covers. DO NOT modify the appliance in any way that is not
described in these instructions. NO user serviceable parts included.
Repair MUST be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
Intended use
Special power cord set
instructions
J WARNING

6
IMPORTANT SAFEGUARDS
This appliance is for household use. Any servicing other than
cleaning and user maintenance shall be performed by an authorized
service representative:
ZDo not immerse base in water or try to disassemble.
ZDo not put the appliance or any individual parts in the
dishwasher.
ZCheck voltage to be sure that the voltage indicated on the
name plate complies with your voltage. The name plate is
located on the underside of the appliance.
ZNever use warm or hot water to fill the water container. Use
cold water only.
ZKeep your hands and the cord away from hot parts of the
appliance during operation.
There is a risk of scalds or burns on the spouts and the cappuccino
frother / nozzle.
ZKeep children away.
ZDo not touch any hot parts. Use the handles or knobs
provided.
ZEnsure that the cappuccino frother / nozzle is correctly fitted
and clean. If incorrectly fitted or if they become blocked, the
cappuccino frother or its parts might come off.
ZNever clean with scouring powders or hard implements.
ZEnsure that the ventilation slots are not covered.
ZNever pull out the drip tray during the brewing process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
JCAUTION
NOTICE

7
IMPORTANT SAFEGUARDS
ZNever fill instant coffee, chocolate mix etc. into the bean
container or ground coffee funnel (filler funnel for ground
coffee). It will damage the functioning of the brewing
chamber.
ZNever fill sugar coated coffee beans into the bean container.
In case of doubt, call your dealer.
ZNever fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing
other than roasted coffee beans).
ZNever fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
ZNever fill anything but fresh, cold and clean water into the
water tank, except when decalcifying.
ZNever use mineral or carbonated water. You can use tap water,
bottled water, spring water and reverse osmosis water.
ZNever do anything with the machine which is not described in
these instructions. In case of doubt, call your dealer.
NEVER DO
(or you will void your
warranty protection):

8
Control elements
Control elements
1
13
12
10
9
11
2
3
4
5
7
6
814
J HOT
J HOT
1 Filler funnel cover
2 Filler funnel for ground coffee
3 Bean container with
aroma preservation cover
4 Water tank cover
5 Water tank
6 Power cord(back of the machine)
7 Coffee grounds container
8 Drip tray
9 Cover cap for grinder adjustment switch
10 Grinder adjustment switch
11 On/Off button Q
12 Milk system with
professional fine foam frother
13 Height-adjustable coffee spout
14 Cup platform
Figure: Your machine may look
different to the one shown.

9
Control elements
1
2
1 Display 2 Multi-function buttons (button function
depends on what is shown in the display)
Service socket for JURA Smart Connect (Smart
Connect is not included in all model variants)
Fine foam frother (used in different
model variants)
Accessories
Container for milk system cleaning Measuring spoon for ground coffee
6

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet (www.jura.com). You will find interesting and
up-to-date information on your E8 and on every aspect of coffee.
When setting up your E8, please note the following:
UPlace the E8 on a horizontal surface that is not sensitive
to water.
UChoose a spot for your E8 which protects the machine
against overheating. Ensure that the ventilation slots are
not covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur®test strips supplied with the
machine.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
JURA on the Internet
Setting up the machine
Filling the bean container
NOTICE
Determining the water
hardness

11
1 Preparing and using for the first time
TYou will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective power cord.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
EThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Precondition:The bean container has been filled.
TInsert the power plug into a power socket.
TPress the On/Off button Qto switch the E8 on.
‘Choose language’
ETo display more languages, press the ‘ > ’ button (bottom
right).
First-time use
J WARNING
NOTICE

12
1 Preparing and using for the first time
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TPress the ‘<’ or ‘>’ button to change the water hardness
setting, for example to ‘25°dH’.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
TPlace a receptacle (at least 10 oz or 300ml) under the fine
foam frother.
TRemove the water tank and rinse it with cold water.
TFit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
TInsert the filter cartridge with its extension into the water
tank.
TTurn the filter cartridge clockwise until it audibly clicks into
place.
TFill the water tank with fresh, cold water and reinsert the
tank.
EThe machine automatically detects that you have just inserted
the filter cartridge.
‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’, the filter is rinsed. Water flows out of
the fine foam frother.
EThe water may be slightly discolored. This is not harmful to
health and does not affect the taste.
‘System is filling’
‘Empty drip tray’

13
1 Preparing and using for the first time
TEmpty the drip tray and put it back into the machine.
TPlace a receptacle under the coffee spout.
‘Machine is heating’
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. The start screen is displayed. Your E8 is ready
for use.
EThe start screen shows the products you can prepare. Press
the ‘>’ button to display more products.
EIf the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Your E8 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of 39–46 °F (4–8 °C). We would therefore
recommend using a milk cooler or a vacuum milk container.
TRemove the protective cover from the fine foam frother.
TConnect the milk pipe to the fine foam frother.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
You have the option of connecting your E8 wirelessly to a
compatible accessory (e.g. the Cool Control Wireless milk cooler).
To do this, the receiver of the Cool Control or the JURA Smart
Connect must be plugged into the service socket.
EThe Smart Connect can be protected against unauthorized
access using a PIN. Activate the PIN function via the JURA
app. You will find more information at
www.jura.com/smartconnect.
EPlease note that you can only connect either the Cool Control
or only one JURA app to the coffee machine via Smart
Connect.
Precondition:The start screen is displayed.
Connecting milk
Connect accessory (with
wireless connection)

14
1 Preparing and using for the first time
TPosition the accessory near the coffee machine (a maximum
of 0.5 m away).
TSwitch on the accessory and the coffee machine.
TPress the reset button of the Smart Connect (e.g. with a
paper clip).
TThen (within 30 sec.) press and hold the reset key of the
accessory until the LED lights up to indicate the successful
connection.

15
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
Basic information about preparing drinks:
UThe display shows four products you can prepare. Press
the ‘>’ button to display more products.
UDuring the grinding operation you can select the coffee
strength of single products by pressing the ‘<’ and
‘>’ buttons.
UDuring preparation you can change the preset amounts
(e.g. water and amount of milk) by pressing the ‘ < ’ and
‘>’ buttons.
UYou can stop the machine at any time while a specialty coffee
or hot water is being prepared. Just press any button.
UThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend
prewarming the cups. The full coffee aroma can develop only in
prewarmed cups. You can purchase a JURA cup warmer from your
specialized dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
J WARNING

16
2 Preparation
Your E8 prepares latte macchiato, cappuccino and other
specialty coffees with milk at the touch of a button. There is no
need to move the glass or cup.
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:The start screen (‘2/3’) is displayed. Milk is connected
to the fine foam frother.
TPlace a glass under the fine foam frother.
TIf you are using the professional fine foam frother, turn the
selector switch to the Milk Foam position (see image).
TPress the ‘Latte macchiato’ button.
‘Latte macchiato’ appears and the preset amount of milk
foam flows into the glass.
EThere is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in
programming mode (see Chapter 4 ‘Permanent settings in
programming mode – Adjusting the product settings’).
Coffee preparation starts. The preset amount of water
for espresso flows into the glass. Preparation stops
automatically. Your E8 is once more ready for use.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen (‘1/3’) is displayed.
Latte macchiato,
cappuccino and other
specialty coffees with
milk
Ristretto, espresso and
coffee

17
2 Preparation
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
Preparation starts. ‘Coffee’ and the coffee strength are
displayed. The preset amount of water for coffee flows
into the cup.
Preparation stops automatically. Your E8 is once more ready
for use.
To prepare two specialty coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi.
Precondition:The start screen (‘1/3’) is displayed.
TPlace two cups under the coffee spout.
TPress the ‘Espresso’ button twice (within 1 second) to start
preparation.
‘2 espressi’ appears and the preset amount of water flows
into the cups.
Preparation stops automatically. Your E8 is once more ready
for use.
‘Doppio’ is Italian for ‘double’. When you prepare an espresso
doppio, two espressi are dispensed one after the other. The result is
an extra full-bodied and aromatic specialty coffee.
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare warm milk.
Precondition:The start screen (‘2/3’) is displayed. Milk is connected
to the fine foam frother.
TPlace a cup under the fine foam frother.
Two ristretti, two espressi
and two coffees
Espresso doppio
Warm milk and milk
foam

18
2 Preparation
TSet the selector switch for the professional fine foam frother
to the Milk position (see image).
EIf you wish to prepare milk foam, set the selector switch to the
Milk Foam position (selector switch in vertical position).
TPress the ‘Milk foam’ button.
The milk is prepared. The preset amount of milk flows into
the cup.
Preparation stops automatically. Your E8 is once more ready
for use.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
You can choose to use a second coffee variety, for example
decaffeinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the E8 stops the operation.
EThe desired specialty coffee must be prepared within
approximately one minute after filling with the ground coffee.
Otherwise the E8 stops the operation and is once more ready
for use.
All specialty coffees with ground coffee are always prepared
following the same model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
Precondition:The start screen (‘1/3’) is displayed.
TPlace an espresso cup under the coffee spout.
Ground coffee

19
2 Preparation
TOpen the powder chute cover.
‘Ground coffee’ / ‘Please add ground coffee’
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
TPress the ‘Espresso’ button.
Preparation starts. ‘Espresso’ appears and the preset amount
of water for espresso flows into the cup.
Preparation stops automatically. Your E8 is once more ready
for use.
It is easy to permanently adjust the amount of water for all single
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:The start screen (‘1/3’) is displayed.
TPlace a cup under the coffee spout.
TPress and hold the ‘Coffee’ button until ‘Enough coffee?
Press button’ appears.
TRelease the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
TPress any button except ‘Cancel’ as soon as there is sufficient
coffee in the cup.
Preparation stops. ‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
Your E8 is once more ready for use.
EYou can alter this setting at any time by repeating the above
procedure.
EYou can also permanently set the amounts for all single
products in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Adjusting the product
settings’).
Permanently setting the
amount of water for the
cup size

20
2 Preparation
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not
operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is
running.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind dur-
ing the preparation of an espresso.
Precondition:The start screen (‘1/3’) is displayed.
TPlace a cup under the coffee spout.
TOpen the cover of the grinder adjustment switch.
TPress the ‘Espresso’ button to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TClose the cover of the grinder adjustment switch.
The E8 allows you to prepare different variants of hot water: ‘Hot
water’ and ‘Hot water for green tea’.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Example:Proceed as follows to prepare hot water for green tea.
Precondition:The start screen (‘3/3’) is displayed.
TPlace a cup under the fine foam frother.
TPress the ‘Hot water for green tea’ button.
‘Hot water for green tea’, the preset amount of water flows
into the cup.
Preparation stops automatically. Your E8 is once more ready
for use.
Adjusting the grinder
NOTICE
Hot water
JCAUTION