Jura E6 User manual

E6 Instructions for Use
KFor your safety: read and understand manual before use.
E

2
Table of contents
Your E6
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
Determining the water hardness ..............................................................................................................10
First-time use .................................................................................................................................................11
Connecting milk...........................................................................................................................................14
2 Preparation 15
Espresso and coffee.....................................................................................................................................16
Two espressi and two coffees.....................................................................................................................16
Cappuccino....................................................................................................................................................16
Milk foam.......................................................................................................................................................17
Permanently setting the amount of water for the cup size .................................................................18
Adjusting the grinder ..................................................................................................................................18
Hot water.......................................................................................................................................................19
3 Daily operation 20
Filling the water tank..................................................................................................................................20
Switching on the machine.........................................................................................................................20
Daily maintenance ......................................................................................................................................20
Regular maintenance ..................................................................................................................................21
Switching off the machine..........................................................................................................................21
4 Permanent settings in programming mode 23
Adjusting the product settings.................................................................................................................24
Automatic switch-off..................................................................................................................................25
Setting the water hardness .......................................................................................................................26
Unit for amount of water...........................................................................................................................26
Language......................................................................................................................................................27
5 Maintenance 28
Rinsing the machine...................................................................................................................................29
Rinsing the fine foam frother....................................................................................................................29
Cleaning the fine foam frother.................................................................................................................30
Dismantling and rinsing the fine foam frother.......................................................................................31
Inserting the filter .......................................................................................................................................32
Changing the filter......................................................................................................................................32
Cleaning the machine ................................................................................................................................33
Descaling the machine ..............................................................................................................................35
Cleaning the bean container..................................................................................................................... 37
Descaling the water tank ...........................................................................................................................38
6 Display messages 39
7 Troubleshooting 40

3
Table of contents
8 Transport and environmentally friendly disposal 42
Transport/ Emptying the system.............................................................................................................42
Disposal.........................................................................................................................................................42
9 Technical data 43
10 Index 44
11 JURA contact details/ Legal information 48
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
J CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your JURA.
‘Coffee’ Display message
J
J DANGER
J WARNING

4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
When using electrical appliances, basic safety precautions shall
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
ZRead all instructions.
ZDo not touch hot surfaces. Use handles or knobs.
ZToprotectagainstfire,electricshockandinjurytopersons,do
not immerse power cord, plugs, or body of machine in water
or other liquid.
ZClose supervision is necessary when any appliance is used by
or near children.
ZUnplug from outlet when not in use and before cleaning.
Allowtocoolbeforeputting onor takingoff parts,andbefore
cleaning the appliance.
ZDonotoperateanyappliancewithadamagedcordorplugor
aftertheappliancemalfunctions,orhasbeendamagedinany
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
ZTheuseofanaccessoryattachmentnotrecommendedbythe
appliance manufacturer may result in fire, electric shock, or
injury to persons.
ZDo not use outdoors.
ZDo not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
ZDo not place on or near a hot gas or electric burner, or in a
heated oven.
ZTo disconnect, turn any control to ‘OFF’ then remove plug
from wall outlet.
ZDo not use appliance for other than intended use.
ZUse extreme caution when dispensing hot steam, hot water
or hot coffee.
ZFor household use only.
Follow the basic safety
precautions

5
IMPORTANT SAFEGUARDS
The appliance is designed and intended for household use only. It
shallonlybe used forcoffeepreparationandtoheatmilkandwater,
according to these instructions. Use for any other purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
People, including children, who
Zdonothavethephysical,sensoryormentalcapabilitiestouse
the appliance safely or
Zare inexperienced or lack knowledge in how to use the
appliance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
ZA short power-supply cord is to be provided to reduce risks
resulting from becoming entangled in or tripping over a
longer cord.
ZThe cord shall be arranged so that it will not drape over the
countertop ortable topwhere it canbe pulledonbychildren
or tripped over.
ZThis appliance has a 3-pin grounded plug.
ZDo not modify the plug in any way.
Extension cords are available an may be used if care is exercised in
their use.
If the user chooses to use an extension cord,
Zthe marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance, and
Zif the appliance is of the grounded type, the extension cord
should be a grounding type 3-wire cord, and
Zthe longer cord should be arranged so that it will not drape
over the counter top or tabletop where it can be pulled on by
children or tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any
service covers. DO NOT modify the appliance in any way that is not
described in these instructions. NO user serviceable parts included.
Repair MUST be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
Intended use
Special power cord set
instructions
J WARNING

6
IMPORTANT SAFEGUARDS
This appliance is for household use. Any servicing other than
cleaningandusermaintenanceshallbeperformedbyanauthorized
service representative:
ZDo not immerse base in water or try to disassemble.
ZDo not put the appliance or any individual parts in the
dishwasher.
ZCheck voltage to be sure that the voltage indicated on the
name plate complies with your voltage. The name plate is
located on the underside of the appliance.
ZNever use warm or hot water to fill the water container. Use
cold water only.
ZKeep your hands and the cord away from hot parts of the
appliance during operation.
There is a risk of scalds or burns on the spouts and the cappuccino
frother / nozzle.
ZKeep children away.
ZDo not touch any hot parts. Use the handles or knobs
provided.
ZEnsure that the cappuccino frother / nozzle is correctly fitted
and clean. If incorrectly fitted or if they become blocked, the
cappuccino frother or its parts might come off.
ZNever clean with scouring powders or hard implements.
ZEnsure that the ventilation slots are not covered.
ZNever pull out the drip tray during the brewing process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
JCAUTION
NOTICE

7
IMPORTANT SAFEGUARDS
ZNever fill instant coffee, chocolate mix etc. into the bean
container or ground coffee funnel (filler funnel for ground
coffee). It will damage the functioning of the brewing
chamber.
ZNever fill sugar coated coffee beans into the bean container.
In case of doubt, call your dealer.
ZNever fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing
other than roasted coffee beans).
ZNever fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
ZNever fill anything but fresh, cold and clean water into the
water tank, except when decalcifying.
ZNeverusemineralorcarbonatedwater.Youcanusetapwater,
bottled water, spring water and reverse osmosis water.
ZNeverdoanythingwiththemachinewhichisnotdescribedin
these instructions. In case of doubt, call your dealer.
NEVER DO
(or you will void your
warranty protection):

8
Control elements
Control elements
1
13
12
10
9
11
2
3
4
5
7
6
814
J HOT
J HOT
1 Cover of filler funnel for cleaning tablet
2 Filler funnel for cleaning tablet
3 Bean container with aroma preservation
cover
4 Water tank cover
5 Water tank
6 Mains cord(back of the machine)
7 Coffee grounds container
8 Drip tray
9 Cover cap for grinder adjustment switch
10 Grinder adjustment switch
11 On/Off button Q
12 Fine foam frother
13 Height-adjustable coffee spout
14 Cup platform

9
Control elements
3
1
2
1 Display
2 Multi-function buttons (button function
depends on what is shown in the display)
3 Switch for hot water and steam
preparation

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet (www.jura.com). You will find interesting and
up-to-date information on your JURA and on every aspect of coffee.
When setting up your JURA, please note the following:
UPlace the JURA on a horizontal surface that is not sensitive to
water.
UChoose a spot for your JURA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur®test strips supplied with the
machine.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
JURA on the Internet
Setting up the machine
Filling the bean container
NOTICE
Determining the water
hardness

11
1 Preparing and using for the first time
TYou will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
When using the machine for the first time, you can choose whether
you want to operate JURA with or without the CLEARYL Smart filter
cartridge. If the water hardness is 10°dH or more, we recommend
using the filter cartridge.
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective power cord.
EThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Precondition:The bean container has been filled.
TInsert the power plug into a power socket.
TPress the On/Off button Qto switch the JURA on.
‘Choose language’
ETo display more languages, press the ‘ > ’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g. ‘English’.
First-time use
J WARNING

12
1 Preparing and using for the first time
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TPress the ‘<’ or ‘>’ button to change the water hardness
setting, for example to ‘25°dH’.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Use filter’
ENow decide whether you want to operate your JURA with or
without a CLEARYL Smart filter cartridge.
Operation with filter cartridge: go straight to the next section (see
Chapter 1 ‘Preparing and using for the first time – First-time use with
filter cartridge activation’).
Operation without filter cartridge (see Chapter 1 ‘Preparing and
using for the first time – First-time use without filter cartridge
activation’).
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TRemove the water tank and rinse it with cold water.
TFit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
TInsert the filter cartridge with its extension into the water
tank.
TTurn the filter cartridge clockwise until it audibly clicks into
place.
TFill the water tank with fresh, cold water and reinsert the
tank.
First-time use with filter
cartridge activation
CAUTION

13
1 Preparing and using for the first time
EThe machine automatically detects that you have just inserted
the filter cartridge.
‘Use filter’ / ‘Saved’
‘Switch open’
TPlace a receptacle (at least 10 oz or 300ml) under the fine
foam frother.
TTurn the switch to thexposition.
‘Filter is being rinsed’, water flows out of the fine foam
frother.
Rinsing of the filter stops automatically after approximately
10 oz (300ml). ‘Switch close’ appears on the display.
TTurn the switch to the °position.
‘Filter rinsing complete’
‘System is filling’, the system fills up with water.
‘Empty drip tray’
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. Your JURA is ready for use.
EThe start screen shows the products you can prepare.
EIf the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘No filter’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank’
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
‘Switch open’
First-time use without filter
cartridge activation
CAUTION

14
1 Preparing and using for the first time
TPlace a receptacle under the fine foam frother and under the
coffee spout.
TTurn the switch to thexposition.
‘System is filling’, the system fills up with water.
‘Switch close’
TTurn the switch to the °position.
‘System is filling’
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. Your JURA is ready for use.
EThe start screen shows the products you can prepare.
Your JURA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8 °C). We would
therefore recommend using a milk cooler or a vacuum milk
container.
TRemove the protective cover from the fine foam frother.
TConnect the milk pipe to the fine foam frother.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
Connecting milk

15
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
EYou can stop the machine at any time while a specialty coffee,
steam or hot water is being prepared. Just press any button
(for a specialty coffee) or return the switch to its original
position (for steam and hot water).
EDuring the grinding operation you can select the coffee strength
of single products by pressing the ‘<’ and ‘>’ buttons.
EDuring preparation you can change the preset amount of
water and milk foam by pressing the ‘<’ and ‘>’ buttons.
EYou can follow the current status of preparation on the display.
EThe water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialized dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
J WARNING

16
2 Preparation
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
Preparation starts. ‘Coffee’ and the coffee strength are
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
To prepare two specialty coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi.
Precondition:The start screen is displayed.
TPlace two cups under the coffee spout.
TPress the ‘Espresso’ button twice (within 1 second) to start
preparation.
‘2 espressi’ appears and the preset amount of water flows
into the cups.
Preparation stops automatically. Your JURA is once more
ready for use.
Your JURA can prepare a cappuccino without the cup having to be
moved.
Precondition:The start screen is displayed. Milk is connected to the
fine foam frother
TPlace a cup under the coffee spout and the fine foam frother.
TPress the ‘Cappuccino’ button.
‘Cappuccino’/ ‘Coffee strength’
As soon as the machine has heated up, ‘Switch open’
appears.
TTurn the switch to thexposition.
‘Cappuccino’, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk is reached.
‘Switch close’
Espresso and coffee
Two espressi and two
coffees
Cappuccino

17
2 Preparation
TTurn the switch to the °position.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Precondition:The start screen is displayed.
TPlace a cup under the fine foam frother.
TPress the ‘Milk foam’ button.
‘Milk foam’
As soon as the machine has heated up, ‘Switch open’ appears.
TTurn the switch to thexposition.
‘Milk foam’, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk is reached.
‘Switch close’
TTurn the switch to the °position.
Your JURA is once more ready for use.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Milk foam

18
2 Preparation
It is easy to permanently adjust the amount of water for all single
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:The start screen is displayed. Milk is connected to the
fine foam frother
TPlace a cup under the coffee spout.
TPress and hold the ‘Coffee’ button until ‘Enough coffee?
Press button’ appears.
TRelease the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
TPress any button (except ‘Cancel’) as soon as there is
sufficient coffee in the cup.
Preparation stops. ‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
Your JURA is once more ready for use.
EYou can alter this setting at any time by repeating the above
procedure.
EYou can also permanently set the amounts for all single
products in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Adjusting the product
settings’).
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
TPlace a cup under the coffee spout.
Permanently setting the
amount of water for the
cup size
Adjusting the grinder
CAUTION

19
2 Preparation
TOpen the cover of the grinder adjustment switch.
TPress the ‘Espresso’ button to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TClose the cover of the grinder adjustment switch.
To obtain a perfect water flow, use the hot-water nozzle.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:The start screen is displayed.
TCarefully remove the fine foam frother from the Connector
System©by twisting slightly.
TAttach the hot-water nozzle to the connector.
TPlace a cup under the hot-water nozzle.
TTurn the switch to thexposition.
‘Hot water’, the preset amount of water flows into the cup.
Preparation stops automatically.
‘Switch close’
TTurn the switch to the °position.
Your JURA is once more ready for use.
Hot water
JCAUTION

20
3 Daily operation
3 Daily operation
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
TPlace a receptacle under the coffee spout.
  TPress the On/Off button Q to switch the JURA on.
‘Welcome to JURA’
‘Machine is heating’
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. The start screen is displayed. Your JURA is
ready for use.
To ensure that you get many years of reliable service out of your
JURA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the drip tray. Rinse
them both with warm water.
EAlways empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
Filling the water tank
CAUTION
Switching on the
machine
Daily maintenance