Jura Impressa F9 guide User manual

JURA F9 Instructions for Use
The Instructions for Use has been awarded the seal of approval by the
independent German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage of safety
aspects.

2
Table of contents
Your JURA F9
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
First-time use................................................................................................................................................10
Determining the water hardness ..............................................................................................................13
Connecting milk...........................................................................................................................................14
Filling the water tank...................................................................................................................................14
2 Preparation 15
Ways of preparing a beverage...................................................................................................................15
Ristretto, espresso and coffee....................................................................................................................16
Two ristretti, two espressi and two coffees .............................................................................................16
Latte macchiato, cappuccino and other speciality coffees with milk.................................................17
Ground coffee...............................................................................................................................................18
Permanently setting the amount of water for the cup size.................................................................19
Adjusting the grinder .................................................................................................................................20
Hot water......................................................................................................................................................20
3 Daily operation 21
Switching on the machine..........................................................................................................................21
Daily maintenance.......................................................................................................................................21
Regular maintenance .................................................................................................................................22
Switching off the machine.........................................................................................................................22
4 Permanent settings in programming mode 23
Product settings ..........................................................................................................................................24
Adjusting the product settings.................................................................................................................24
Replacing products on the start screen..................................................................................................25
Renaming a product...................................................................................................................................26
Automatic switch-off..................................................................................................................................27
Energy-saving mode ..................................................................................................................................28
Maintenance settings.................................................................................................................................28
Setting the water hardness .......................................................................................................................29
Display settings ...........................................................................................................................................30
Unit for amount of water...........................................................................................................................30
Restore factory settings..............................................................................................................................31
Language.......................................................................................................................................................31
Querying information ................................................................................................................................32

3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your JURA F9.
‘Espresso’ Display
Symbol description
5 Maintenance 33
Rinsing the machine...................................................................................................................................33
Rinsing the milk system.............................................................................................................................34
Cleaning the milk system..........................................................................................................................34
Dismantling and rinsing the dual spout.................................................................................................35
Inserting and activating the filter.............................................................................................................36
Changing the filter......................................................................................................................................37
Cleaning the machine ................................................................................................................................39
Descaling the machine ..............................................................................................................................40
Descaling the water tank...........................................................................................................................42
Cleaning the bean container.....................................................................................................................42
6 Display messages 43
7 Troubleshooting 44
8 Transport and environmentally friendly disposal 45
Transport/ Emptying the system.............................................................................................................45
Disposal.........................................................................................................................................................45
9 Technical data 46
10 Index 47
11 JURA contact details/ Legal information 52

4
Control elements
Control elements
2
7
1
4
3
6
5
14
13
12
11
10
8
9
1 Bean container with aroma preservation
cover
2 Water tank cover
3 Water tank
4 Power switch and mains cable
(back of the machine)
5 Coffee grounds container
6 Drip tray
7 Cup grille
8 Filler funnel cover
9 Filler funnel for ground coffee
10 Storage compartment cover
11 Grinder adjustment switch
12 Measuring spoon for ground coffee
13 Hot-water spout
14 Height-adjustable dual spout

5
Control elements
P
31 2
4
6
5
Top of the machine
1 QOn/Off button
2 gRotary Switch
3 OP button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)
6 lSwitch for hot water preparation

6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibil-
ity for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructionsforuseclosetothemachine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
thereisasmellof burning, unplugthe machine
immediately from the mains supply and con-
tact JURA service.
UIf the mains cable of this machine is damaged,
it must be repaired either directly by JURA or
by an authorised JURA service centre.
UMake sure that the JURA F9 and the mains
cable are not located close to hot surfaces.
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
Proper use
For your safety
J

7
Important information
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch off
the JURA F9 using the On/Off button and then
at the power switch. Only then should you
remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts.
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
UProtect the JURA F9 from environmental influ-
ences such as rain, frost and direct sunlight.
UDo not immerse the JURA F9, mains cable or
connections in water.
UDo not put the JURA F9 or any individual parts
in the dishwasher.
USwitch your JURA F9 off at the power switch
before any cleaning operation. Always wipe
the JURA F9 with a damp cloth rather than a
wet one, and protect it from prolonged expo-
sure to water splash.

8
Important information
UOnly connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your JURA F9. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
UConnect the JURA F9 directly to a domestic
power socket. Using multi-socket adapters or
extension cords may cause overheating.
UPlease only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
JURA F9.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.
UOnly fill the water tank with fresh, cold water.
USwitch the machine off at the power switch if
you are going to be absent for a longer period
of time.
UChildren may not clean or service the machine
unless supervised by a responsible person.
UDo not allow children to play with the machine.
UKeep children under the age of 8 away from
the machine, or supervise them constantly.
UChildren aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Chil-
dren must be able to recognise and under-
stand the potential dangers arising from incor-
rect use.

9
Important information
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Blue filter
cartridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct sun-
light.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your JURA
F9 and on every aspect of coffee.
When setting up your JURA F9, please note the following:
UPlace the JURA F9 on a horizontal surface that is not sensitive
to water.
UChoose a spot for your JURA F9 which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When using the machine for the first time, you can choose whether
you want to operate JURA F9 with or without the CLARIS Blue filter
cartridge. If the water hardness is 10 °dH or more, we recommend
using the filter cartridge. If you do not know the hardness of your
water, you can find this out first (see Chapter 1 ‘Preparing and using
for the first time – Determining the water hardness’).
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
First-time use

11
1 Preparing and using for the first time
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
 3 TSwitch on the JURA F9 using the power switch on the back
of the machine.
 Q TPress the On/Off button to switch the JURA F9 on.
The display shows the languages you can choose from.
ETo display more languages, press the ‘> ’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Use filter’
ENow decide whether you want to operate your JURA F9 with
or without a CLARIS Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Active’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
TRemove the water tank and rinse it with cold water.
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
JWARNING
First-time use with filter
cartridge activation
CAUTION

12
1 Preparing and using for the first time
TFill the water tank with fresh, cold water and reinsert the
tank.
TPress the ‘Next’ button.
‘Switch open’
TPlace a receptacle under the hot-water spout and dual spout.
 l TTurn the switch to themposition.
‘Filter is being rinsed’, water flows out of the hot-water
spout.
EYou can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
EThe water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300ml. ‘Switch close’ appears on the display.
 y TTurn the switch to the °position.
‘System is filling’, the system fills up with water.
‘Machine is heating’, the machine heats up.
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. ‘Please select product’ appears on the display.
Your JURA F9 is ready for use.
EThe display shows the products you can prepare.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘Inactive’ button.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
First-time use without filter
cartridge activation
CAUTION

13
1 Preparing and using for the first time
 g TTurn the Rotary Switch to change the water hardness set-
ting, e.g. to ‘25°dH’.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank.’
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
‘Switch open’
TPlace a receptacle under the hot-water spout and dual spout.
 l TTurn the switch to themposition.
‘System is filling’, water flows out of the hot-water spout.
The operation stops automatically. ‘Switch close’ appears on
the display.
 y TTurn the switch to the °position.
‘System is filling’, the system fills up with water.
‘Machine is heating’, the machine heats up.
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. ‘Please select product’ appears on the display.
Your JURA F9 is ready for use.
EThe display shows the products you can prepare.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Determining the water
hardness

14
1 Preparing and using for the first time
Your JURA F9 creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 4–8°C. We would therefore recom-
mend using a milk cooler or a vacuum milk container.
TRemove the protective cover from the dual spout.
TConnect the milk pipe to the dual spout.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
Connecting milk
Filling the water tank
CAUTION

15
2 Preparation
2 Preparation
EYou can stop the machine at any time while a speciality coffee
or hot water is being prepared. Just press any button (for a
speciality coffee) or return the switch to its original position
(for hot water preparation).
EDuring the grinding operation you can select the coffee
strength of single products by turning the Rotary Switch g.
EDuring preparation, you can change the preset amount of
water or milk foam by turning the Rotary Switch g.
EYou can follow the current status of preparation on the display.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
The JURA F9 offers various ways of preparing a speciality coffee, milk
foam or hot water:
UPreparation using the start screen: Simply press the corre-
sponding preparation button for the product shown on the
display (start screen) that you want.
The following products are displayed as standard on the start
screen:
U‘Espresso’
U‘Coffee’
U‘Flat white’
U‘Latte macchiato’
UUsing the product selector view (Rotary Selection): Only
some of the products you can prepare are shown on the start
screen. As soon as you turn the Rotary Switch, more products
are displayed in a product selector view.
Turn the Rotary Switch to bring the product you want into
focus. Start preparation by pressing the Rotary Switch or the
‘Prepare’ button.
Ways of preparing a
beverage

16
2 Preparation
The following additional products are shown in the product
selector view:
U‘Ristretto’
U‘2 ristretti’
U‘2 espressi’
U‘2 coffees’
U‘Special’
U‘Cappuccino’
U‘Macchiato’
U‘Caffè latte’
U‘Portion milk foam’
EThe product selector view disappears automatically after
10seconds if no preparation is started.
EYou have the option of replacing the four products on the start
screen with your personal favourites (see Chapter 4 ‘Perma-
nent settings in programming mode – Replacing products on
the start screen’). Please note that the descriptions provided
in the following sections always refer to the default settings.
Example:Proceed as follows to prepare one coffee.
Precondition:‘Please select product’ is displayed.
TPlace a cup under the dual spout.
TPress the ‘Coffee’ button.
Preparation starts. ‘Coffee’ and the coffee strength are dis-
played. The preset amount of water for coffee flows into the
cup.
Preparation stops automatically. ‘Please select product’
appears on the display.
There are several ways of preparing two speciality coffees.
UUsing the product selector view:
UBring one of the double products ‘2 ristretti’, ‘2 espressi’ or
‘2 coffees’ into focus and press the Rotary Switch or the but-
ton ‘Prepare’.
UWhen preparing a single product:
UPress the single product button twice within 2 seconds to
start preparing the relevant double product.
Ristretto, espresso and
coffee
Two ristretti, two espressi
and two coffees

17
2 Preparation
Example:Proceed as follows to prepare two coffees (using product
selector view).
Precondition:The start screen is displayed.
TPlace two cups under the dual spout.
 g TTurn the Rotary Switch to view the product selector.
 g TTurn the Rotary Switch until the ‘2 coffees’ product is in
focus.
 k TPress the Rotary Switch to start preparation.
Coffee preparation starts. The preset amount of water for
coffee flows into the cups. Preparation stops automatically.
Your JURA F9 is once more ready for use.
Your JURA F9 prepares latte macchiato, cappuccino, flat white and
other speciality coffees with milk at the touch of a button. There is
no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:‘Please select product’ is displayed. Milk is connected
to the dual spout.
TPlace a glass under the dual spout.
TPress the ‘Latte macchiato’ button.
‘Latte macchiato’, the preset amount of milk foam flows into
the glass.
EThere is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. ‘Please select product’ appears on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning
the milk system’).
Latte macchiato,
cappuccino and other
speciality coffees with
milk

18
2 Preparation
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the JURA F9 stops the operation.
EThe desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth-
erwise the JURA F9 stops the operation and is once more ready
for use.
All speciality coffees with ground coffee are always prepared follow-
ing the same model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
Precondition:‘Please select product’ is displayed.
TPlace an espresso cup under the coffee spout.
TOpen the cover of the filler funnel for ground coffee.
‘Please add ground coffee’
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
‘Please select product’
TPress the ‘Espresso’ button.
Preparation starts. ‘Espresso’, the preset amount of water for
espresso flows into the cup.
Preparation stops automatically. ‘Please select product’
appears on the display.
Ground coffee

19
2 Preparation
It is easy to permanently adjust the amount of water for all single
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example:Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:‘Please select product’ is displayed.
TPlace a cup under the dual spout.
TPress and hold the ‘Coffee’ button until ‘Enough coffee?
Press button’ appears.
TRelease the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
TPress any button as soon as there is sufficient coffee in the
cup.
Preparation stops. ‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product’ appears on the display.
EYou can alter this setting at any time by repeating the above
procedure.
EThe amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch kuntil ‘Enough coffee?
Press button’ appears.
EYou can also permanently set the amount of water for all spe-
ciality coffees and hot water in programming mode (see
Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
Permanently setting the
amount of water for the
cup size

20
2 Preparation
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.
TPlace a cup under the coffee spout.
TOpen the storage compartment cover.
TPress the ‘Espresso’ button to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TClose the storage compartment cover.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:‘Please select product’ is displayed.
TPlace a cup under the hot-water spout.
 l TTurn the switch to themposition.
‘Hot water’, the preset amount of water flows into the cup.
Preparation stops automatically.
‘Switch close’
 y TTurn the switch to the °position.
‘Please select product’ appears on the display.
Adjusting the grinder
CAUTION
Hot water
JCAUTION