Jura IMPRESSA XS95 ONE TOUCH User manual

The IMPRESSA XS95/XS90 One Touch Manual
JURA Type 668
The ‘IMPRESSA Manual’ has been awarded the seal of approval by the
independent German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage of safety
aspects.
KOriginal instructions for use
Before using the machine read the instructions for use.
E

2
Your IMPRESSA XS95/XS90 One Touch
Control elements 4
Proper use 6
For your safety 6
The IMPRESSA XS95/XS90 One Touch Manual 8
Symbol description.......................................................................................................................................8
1 Preparing and using for the first time 9
Connector System©.....................................................................................................................................9
JURA on the Internet.....................................................................................................................................9
Setting up.......................................................................................................................................................9
Filling the water tank....................................................................................................................................9
Bean container filling...................................................................................................................................10
First-time use................................................................................................................................................10
Using and activating filter...........................................................................................................................11
Determining and adjusting the degree of water hardness..................................................................12
Adjusting grinder.........................................................................................................................................13
Switching on.................................................................................................................................................14
Switching off.................................................................................................................................................15
2 Familiarising yourself with the control options 16
Preparation at the touch of a button........................................................................................................16
One-off settings before and during preparation....................................................................................17
Entering a permanent setting for the amount of water for a cup size...............................................18
Permanent settings in programming mode...........................................................................................19
Viewing information and maintenance status.......................................................................................21
Counter.........................................................................................................................................................22
3 Preparation at the touch of a button 23
Espresso........................................................................................................................................................23
Coffee............................................................................................................................................................23
Coffee à la Carte..........................................................................................................................................24
Latte macchiato, cappuccino....................................................................................................................24
Pre-ground coffee.......................................................................................................................................25
Hot milk and milk foam.............................................................................................................................26
Hot water .....................................................................................................................................................27
4 Permanent settings in programming mode 28
Products........................................................................................................................................................28
Energy-saving mode (Energy Save Mode, E.S.M.©)..............................................................................30
Automatic switch-off...................................................................................................................................31
Table of contents

3
Table of contents
Rinses.............................................................................................................................................................31
Restore factory settings.............................................................................................................................32
Lock................................................................................................................................................................33
Unit amount of water.................................................................................................................................34
Language......................................................................................................................................................34
5 Maintenance 36
Maintenance tips.........................................................................................................................................36
Cleaning the
cappuccino frother......................................................................................................................................36
Rinsing the machine...................................................................................................................................37
Rinsing the cappuccino frother................................................................................................................38
Disassembling and rinsing the Professional Cappuccino Frother......................................................39
Disassembling and rinsing the Easy Cappuccino Frother....................................................................40
Cleaning the machine................................................................................................................................40
Descaling the machine...............................................................................................................................42
Changing the filter......................................................................................................................................44
Cleaning the
bean container.............................................................................................................................................46
Descaling the water tank...........................................................................................................................47
6 Display messages 48
7 Troubleshooting 50
8 Transport and environmentally neutral disposal 52
Transport / Emptying the system.............................................................................................................52
Disposal.........................................................................................................................................................52
9 Technical data 53
Index 54
JURA contact details / Legal information 56

4
Control elements
Figure: IMPRESSA XS95 One Touch
Control elements
1 Bean container cover
2 Bean container with aroma preservation
cover
3 Water tank with handle
4 Power switch and power cable
(back of machine)
5 Coffee grounds container
6 Cup platform
7 Drip tray
8 Fineness of grind switch
9 Cup tray
10 Cover of filler funnel for pre-ground coffee
11 Filler funnel for pre-ground coffee
12 Connector System©
for removable frothers
13 Professional Cappuccino Frother
14 Height-adjustable coffee spout
15 Hot water spout
12
1
2
3
13
14
4
8
11
10
15
9
5
6
7

5
Control elements
Front left
1Display
2Rotary Switch cover
3f Rotary switch
Q On/off button
c Maintenance button
i 1 Espresso button
4 2 Espressi button
o 1 Coffee button
d 2 Coffees button
e Coffee à la Carte button
vPre-ground coffee button
Front right
4 öSelector switch
5 Professional Cappuccino Frother
6 Easy Cappuccino Frother
a Hot water portion symbol
m Hot water symbol
p Cappuccino button
z Milk portion symbol
n Milk symbol
qLatte Macchiato button
The Connector System©permits the use of different frothers. These are available from stockists.
2
3
4
1
5
56

6
Important information
Themachineisdesignedandintendedforcommercialuse.Itshould
only be used for coffee preparation and to heat milk and water. Use
for any other purpose will be deemed improper. JURA Elektroappa-
rate AG cannot accept any responsibility for the consequences of
improper use.
Before using the machine always carefully read and comply with all
these instructions. Keep this manual close to the IMPRESSA and, if
appropriate, pass it on to the next user.
Please read and note carefully the following important safety infor-
mation.
By doing this, you can avoid the life-threatening danger of electric
shock:
ZNever use a machine which has been damaged or with a
defective power cable.
ZForinformationonwhattodoincaseofdamage,forexample
ifthereisasmellofburning,unplugthemachineimmediately
from the mains supply and contact the JURA service centre.
ZIf the power cable for this machine is damaged, it must be
repairedeitherdirectlybyJURAorbyaJURAapprovedservice
centre.
ZMake sure that the IMPRESSA and the power cable are not
located close to hot surfaces.
ZBecarefultoensurethatthe powercable does notgetcaught
and does not rub against sharp edges.
ZNever open and repair the machine yourself. Do not modify
themachineinanywaythatisnotdescribed in theIMPRESSA
Manual. The machine contains live parts. If opened, there is a
danger of serious injury. Repairs may only be carried out by
JURA approved service centres, using original spare parts and
accessories.
There is a risk of scalds or burns on the spouts or in the nozzle:
ZPlace the machine out of the reach of children.
ZDo not touch any hot parts. Use the handles provided.
Proper use
For your safety

7
Important information
ZBe careful to ensure that the appropriate nozzle is installed
and clean. The nozzle or parts of the nozzle might come off if
the parts are not assembled correctly or a blockage occurs.
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
ZNeverallowthepowercabletolooselyhangdown.Thepower
cable can be tripped over or damaged.
ZProtect your IMPRESSA from environmental influences such
as rain, frost and direct sunlight.
ZDo not put the IMPRESSA, cable or connections in water.
ZDo not put the IMPRESSA or any individual parts in the dish-
washer.
ZTurn your IMPRESSA off at the power switch before starting
any cleaning operation. Always wipe your IMPRESSA with a
damp cloth rather than a wet one, and protect it from pro-
longed water splash.
ZDo not set up the IMPRESSA anywhere where a jet of water
may be used.
ZOnly connect the machine to a power supply in accordance
with the information on the rating plate. The rating plate is
locatedontheundersideof yourIMPRESSA. Further technical
data is given in Chapter 9 ‘Technical Data’.
ZUse only original JURA care products. Use of accessories that
are not explicitly recommended by JURA could damage the
IMPRESSA.
ZDonotuseanycoffeebeanstreatedwithadditivesorcaramel-
ised coffee beans.
ZAlways fill the water tank with cold, fresh mains water.
ZIfyouwill be absentforanextendedperiod, turn themachine
off and unplug.
Safe handling of the CLARIS filter cartridges:
ZCLARISfiltercartridgesshouldbekeptoutofthereachofchil-
dren.
ZStore them dry in the sealed package.
ZProtect them from heat and direct sunlight.
ZDo NOT use damaged CLARIS filter cartridges.
ZDo NOT open CLARIS filter cartridges.

8
The IMPRESSA XS95/XS90 One Touch Manual
You are holding the manual for your IMPRESSA XS95/XS90 One
Touch in your hand. It will help you to familiarize yourself with your
IMPRESSAsafelyandquicklyandteachyouthefullrangeoffacilities
it offers.
Chapter 1, ‘Preparing and using your IMPRESSA for the first time’,
explains step-by-step how to set up and prepare the IMPRESSA.
Chapter 2, ‘Familiarising yourself with the control options’ is impor-
tant for you to read as you are familiarising yourself with your
IMPRESSA. It invites you to actively explore all the different coffee
experiences that it offers.
All the other chapters are intended to help you when you have a
specific query.
If you use the IMPRESSA XS95/XS90 One Touch Manual, you will be-
comeamasteratpreparing excitingcoffeespecialities,youwillbea
Barista!
Youcandownloadtheshortoperatinginstructionsforyourmachine
from the JURA website (www.jura.com).
The IMPRESSA XS95/XS90 One Touch Manual
Symbol description
Symbols used
EInformation and tips to make things easier for you as you use your IMPRESSA.
@References to the online JURA website, where you can find interesting further infor-
mation: www.jura.com.
TPrompt to take action. This symbol means that you are being prompted to perform
some action.
Warnings
CAUTION
Always take note of any information marked with the CAUTION or WARNING symbol.
The signal word WARNING points out potential risk of serious injury, and the signal
word CAUTION potential risk of slight injury.
CAUTION The CAUTION symbol is used to draw attention to circumstances which could cause
the machine to become damaged.

9
1 Preparing and using for the first time
Thischapterprovidesyouwiththeinformationyouneedtouseyour
IMPRESSA without any problems. You will prepare your IMPRESSA
step-by-step for your first coffee experience.
The Connector System©permits the use of different cappuccino
frothers:
ZProfessional Cappuccino Frother
UCappuccino / latte macchiato
UHot milk
ZEasy Cappuccino Frother
UCappuccino / latte macchiato
Visit us on the Internet.
@ At www.jura.com you will find interesting and up-to-date
informationonyourIMPRESSA and on every aspectof coffee.
@ The Knowledge Builder awaits you at www.jura.com. The
interactive assistant, LEO, will support you and explain the
benefits of and how to use your IMPRESSA.
When setting up your IMPRESSA, please note the following:
ZSet the IMPRESSA down on a horizontal surface that is not
sensitive to water.
ZChoose a spot for your IMPRESSA which is protected against
overheating.Ensurethattheventilationslotsarenotcovered.
To enjoy perfect coffee we recommend changing the water every
day.
Milk, mineral water or other liquids can damage the water tank or
the machine.
TOnly fill the water tank with fresh, cold water.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert.
1 Preparing and using for the first time
Connector System©
JURA on the Internet
Setting up
Filling the water tank
CAUTION

10
1 Preparing and using for the first time
Thebeancontainerhasanaromapreservationcover.Thiswillensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
pre-ground or freeze-dried coffee will damage the grinder.
TOnly use untreated coffee beans to refill the bean container.
TOpenthecoverofthebeancontainerandremovethearoma
preservation cover.
TRemove any dirt or foreign objects inside the bean con-
tainer.
TFill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
If the machine is operated with a defective power cable, there is a
danger of electric shock.
TNever use a machine which has a defective power cable.
Precondition: The water tank and bean container are full.
TInsert the mains plug into a power socket.
3 T SwitchontheIMPRESSAusingthepowerswitchontheback
of the machine.
The on/off button Qlights up (standby).
Q T Press the on/off button to switch the IMPRESSAon.
The pre-set language appears on the display.
TOpen the cover of the Rotary Switch.
g T Turn the Rotary Switch until the desired language is dis-
played. For Example: LANGUAGE ENGLISH
k T Press the Rotary Switch to confirm the language.
CONFIRMED √ appears briefly on the display to confirm
the setting.
FILL SYSTEM / PRESS RINSE, the maintenance
button clights up.
Bean container filling
CAUTION
First-time use
WARNING

11
1 Preparing and using for the first time
TPlace a receptacle under the hot water spout and another
under the frother.
c T Press the maintenance button.
SYSTEM FILLS, the system fills up with water and the
maintenance button flashes. A small amount of water flows
from the frother and the hot water spout.
This operation stops automatically. WELCOME TO JURA
appears on the display.
HEATING UP
PRESS RINSE, the maintenance button clights up.
TPlace a receptacle under the coffee spout.
c T Press the maintenance button.
The machine rinses itself, stopping automatically.
COFFEE READY appears on the display. Your IMPRESSA
is ready to use.
EIfyouhavenot beenabletousethemachineforthe firsttime
correctly and fully, contact customer support in your country
(see ‘JURA contact details / Legal information’).
YourIMPRESSAnolongerhastobedescaledifyouareusingCLARIS
filter cartridges.
@ Youcanalsotryoutthe‘Insertfilter’operationonline.Visitthe
Knowledge Builder at www.jura.com.
EPerformthe‘Insertfilter’operationwithoutinterruptions.This
will ensure that your IMPRESSA always produces its best.
Precondition: COFFEE READY is displayed.
TOpen the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until MAINTENANCE
appears on the display.
g T Turn the Rotary Switch until FILTER NO is displayed.
k T Press the Rotary Switch to enter the programme item.
FILTER NO
g T Turn the Rotary Switch until FILTER YES is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED w appears briefly on the display to confirm
the setting.
Using and activating
filter

12
1 Preparing and using for the first time
INSERT FILTER / PRESS RINSE, the maintenance
button clights up.
TRemove a CLARIS filter cartridge and the filter cartridge ex-
tension from the Welcome Pack.
TFit the extension on top of the filter cartridge.
TRemove the water tank and empty it.
TLift the cartridge holder and insert the filter cartridge into
the water tank, applying slight pressure.
TClose the cartridge holder. It will click into place audibly.
TFill the water tank with fresh, cold water and reinsert.
TPlace a receptacle (at least 500 ml) under the frother.
EIfyouare usingtheProfessionalCappuccinoFrother, setthe
selection lever of the frother to the steam position n.
c T Press the maintenance button.
FILTER RINSING, water flows out of the frother.
EYou can interrupt rinsing of the filter at any time by pressing
any button.
EThe water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml.
COFFEE READY appears on the display. The filter is now
activated.
Theharderthewateris,themorefrequentlytheIMPRESSAneedsto
be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH. This can also be deactivated, which means that
the IMPRESSA will not let you know when it has to be descaled.
EHowever, if you are using the CLARIS filter cartridge and have
activated it, you will not be able to adjust the water
hardness.
Determining and
adjusting the degree of
water hardness

13
1 Preparing and using for the first time
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for one second) under flowing
water. Shake off the water.
TWait for about one minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
Example: To change the water hardness from 16°dH to 25°dH,
proceed as follows:
Precondition: COFFEE READY is displayed.
TOpen the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until MAINTENANCE
appears.
g T Turn the rotary switch until HARDNESS 16°dH is
displayed.
k T Press the Rotary Switch to enter the programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED w appears briefly on the display.
HARDNESS 25°dH
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY is shown on the display.
You can adjust the grinder continuously to suit the roast of your
coffee.
Ifyouadjustthefinenessofgrindwhenthegrinderisnotoperating,
the grinding wheel could be damaged.
TOnly adjust the fineness of grind when the grinder is run-
ning.
The fineness of grind setting is correct if the coffee flows regularly
from the coffee spout. A fine, thick crema is also formed.
Adjusting grinder
CAUTION

14
1 Preparing and using for the first time
Our recommendations:
ZSelect a fine setting for a light roast.
UIf the fineness of grind setting is too fine, the coffee only
drips from the coffee spout.
ZSelect a coarse setting for a darker roast.
UIf the fineness of grind is too coarse the coffee flows too
quickly from the coffee spout.
Example:Tochangethefinenessofgrindduringcoffeepreparation,
proceed as follows:
TOpen the cover of the bean container.
TPlace a cup under the coffee spout.
o T Press the 1 Coffee button.
The grinder starts and 1 COFFEE is displayed.
TTurn the fineness of grind switch to the desired position
while the grinder is running.
The coffee will be prepared and the fineness of grind is
adjusted.
WhentheIMPRESSAisswitchedon,apromptfortherinseoperation
automatically appears which is initiated by pressing the mainte-
nance button.
This setting can be changed in programming mode so that the
machine automatically activates the switch-on rinse (see Chapter 4
‘Permanent settings in programming mode – Rinses’).
Precondition: Your IMPRESSA is switched on at the power switch
and the on/off button Qis illuminated.
Q T Press the on/off button to switch the IMPRESSAon.
WELCOME TO JURA appears briefly on the display.
HEATING UP
PRESS RINSE, the maintenance button clights up.
Switching on

15
1 Preparing and using for the first time
TPlace a receptacle under the coffee spout.
c T Press the maintenance button.
The machine rinses itself, stopping automatically.
COFFEE READY appears on the display. Your IMPRESSA
is ready to use.
WhenyouswitchyourIMPRESSAoff,thespoutswithwhichacoffee
speciality or milk have been prepared are rinsed.
TPlace a receptacle under the coffee spout and the frother.
Q T Press the on/off button.
MACHINE RINSING appears on the display, and the
coffee spout is rinsed.
SPOUT RIGHT / PRESS RINSE.
c T Press the maintenance button.
MACHINE RINSING, the right coffee spout is rinsed.
TheIMPRESSAisswitchedoff,andtheon/offbuttonQlights
up.
EWhen your IMPRESSA is switched off, a hissing noise may be
audible. This is normal and does not have any effect on the
machine.
Switching off

16
2 Familiarising yourself with the control options
WiththeIMPRESSA,youcanprepareanexcellentcoffeeormilkspe-
cialityatthetouchofabutton.Youalsohavetheoptionofadjusting
thecoffeestrengthandtemperature,aswellastheamountofwater
to your personal taste.
This chapter will allow you to become familiar with all control
options with the aid of examples. To familiarise yourself with your
IMPRESSA, we recommend that you make a point of actively trying
thefacilitiesdescribedinthischapter.Youwillfindthisiswellworth-
while.
Learn how to perform the following:
ZPreparation at the touch of a button
ZOne-offsettingsbeforeandwhileyourdrinkisbeingprepared
ZAdjusting the default amount of water to suit the cup size
ZPermanent settings in programming mode
EYou can stop the machine at any time while a coffee or milk
speciality orhot wateris beingprepared. To do this, press any
button.
@ If you prefer to familiarise yourself with your IMPRESSA in a
fun way on the computer, the interactive Knowledge Builder
tutorial programme can be found on the Internet at
www.jura.com.
Prepare your favourite coffee speciality at the touch of a button.
All coffee specialities are prepared following this model.
Example: This is how to prepare one coffee.
Precondition: COFFEE READY is displayed.
TPlace a cup under the coffee spout.
o T Press the 1 Coffee button.
1 COFFEE and the pre-set coffee strength is displayed.
Thepre-set amountof waterflows into the cup. Preparation
stops automatically. ENJOY appears on the display.
COFFEE READY is then displayed.
ETo prepare 2 coffees, place two cups under the coffee spout
and press the 2 Coffees button d.
2 Familiarising yourself with the control options
Preparation at the
touch of a button

17
2 Familiarising yourself with the control options
Itispossibletomakevarioussettingsbeforeandduringpreparation.
Theseone-offsettingsarealwaysfollowthesamemodelandarenot
stored.
The coffee strength of Coffee à la Carte can be changed before
preparation. The following coffee strength options can be selected:
Zö(xmild)
Zöö (mild)
Zööö (normal)
Zöööö (strong)
Zööööö (xstrong)
Example: Proceed as follows to to prepare astrong cup of Coffee à
la Carte.
Precondition: COFFEE READY is displayed.
TPlace a cup under the coffee spout.
TOpen the cover of the Rotary Switch.
e T Press the Coffee à la Carte button.
A LA CARTE and the pre-set coffee strength is dis-
played.
g T Turn the Rotary Switch until A LA CARTE öööö is
displayed.
k T Turn the Rotary Switch while A LA CARTE öööö is
displayed.
A LA CARTE öööö, the pre-set amount of water flows
into the cup. Preparation stops automatically. ENJOY
appears on the display. COFFEE READY is then dis-
played.
Thepre-set amountof waterof allcoffeeproducts can be changed
during the brewing operation by turning the Rotary Switch.
Example: Proceed as follows to prepare a 110 ML cup of coffee.
Precondition: COFFEE READY is displayed.
TPlace a cup under the coffee spout.
One-off settings before
and during preparation
Changing the coffee
strength before preparation
Changing the amount of
water during preparation

18
2 Familiarising yourself with the control options
TOpen the cover of the Rotary Switch.
o T Press the 1 Coffee button.
1 COFFEE and the pre-set coffee strength is displayed.
The brewing operation starts and the coffee flows into the
cup.
g T Turn the Rotary Switch during the brewing operation until
1 COFFEE / 110 ML is displayed.
The set amount of water flows into the cup. Preparation
stops automatically. ENJOY appears on the display.
COFFEE READY is then displayed.
Itiseasytomakepermanentsettingsfortheamountofwaterforall
coffee specialities, cappuccino, latte macchiato, a portion of hot
waterandportionofmilkaccordingtothecupsize.Asinthefollow-
ing example, adjust the amount of water once. Every time you pre-
pare a drink in the future, this amount of water will be dispensed.
Making the permanent settings for the amount of water for the
respective cup size always follows this model.
Example: To make permanent settings for the amount of water for
an espresso, proceed as follows:
Precondition: COFFEE READY is displayed.
TPlace an espresso cup under the coffee spout.
i T Press and hold the 1 Espresso button.
1 ESPRESSO and the coffee strength is displayed.
i T Hold the Espresso button down until ENOUGH COFFEE?
appears.
i T Release the 1 Espresso button.
Coffee preparation will start and the espresso will flow into
the cup.
TPress any button as soon as enough espresso has flowed
into the cup.
Preparation stops automatically. CONFIRMED w appears
brieflyonthedisplay.Thesetamountofwaterforanespres-
so will be permanently stored. COFFEE READY is then
displayed.
EYou can alter these settings at any time by repeating the
above procedure.
Entering a permanent
setting for the amount
of water for a cup size

19
2 Familiarising yourself with the control options
Programme item Subitem Explanation
MAINTENANCE CLEAN CAPPUCCINO,
RINSE MACHINE,
RINSE CAPPUCCINO,
CLEAN MACHINE,
DECALCIFY MACHINE,
CHANGE FILTER
TSelect the desired maintenance
programme.
If no action is taken, programming mode
is exited in the MAINTENANCE pro-
gramme item automatically after approx.
five seconds.
PRODUCTS SELECT PRODUCT TSelect your settings for the coffee and
milk specialities and hot water.
FILTER FILTER YES
FILTER NO
TIndicate whether you operate your
IMPRESSA with or without a CLARIS filter
cartridge.
HARDNESS
(is only displayed
when the filter is
not activated)
HARDNESS INACTIVE,
1°dH – 30°dH
TAdjust the water hardness.
ECONOMY MODE SAVE NO,
SAVE LEVEL 1,
SAVE LEVEL 2
TSelect an energy-saving mode.
OFF AFTER 0.5 H –15 H TSet the number of hours after which the
IMPRESSA should switch off automatically.
RINSES INIT RINSE,
CAPP RINSE
TSet whether the switch-on rinse should
be started manually or automatically.
TSet whether the prompt for cappuccino
rinsing should be started immediately
or 10 minutes afterpreparation of a milk
speciality.
Youcan easily adjustyourIMPRESSAtoyourpersonal coffeeblends
and specialities. You can navigate through the easy-to-understand
programme steps and make permanent settings simply by turning
and pressing the Rotary Switch.
You can make the following permanent settings with the Rotary
Switch:
Permanent settings in
programming mode

20
2 Familiarising yourself with the control options
Programme item Subitem Explanation
RESET PRODUCT,
ALL PROD.,
ALL,
EMPT.SYST.
TReset the permanently set values of all
products to the factory settings.
LOCK PRODUCT,
PRE-SELECT,
MAINT.
TLock the buttons for individual products,
pre-selection of coffee strength (for coffee à
la carte) or the maintenance programmes.
INFORMATION TKeep track of all prepared coffee and milk
specialities and view the maintenance
status.
COUNTER TYou have the option of specifying your
consumption over a timeframe determined
by you. You can reset this counter to zero at
any time.
SETTINGS ML/OZ TSelect the unit of the amount of water.
LANGUAGE TSelect the desired language.
EXIT TExit programming mode.
Settings in programming mode always follow the same model.
Example: To change the strength of one espresso from
öööö (strong) to ööö (normal).
Precondition: COFFEE READY is displayed.
TOpen the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until MAINTENANCE
appears.
g T Turn the Rotary Switch until PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
SELECT PRODUCT
ENext select the product button for which you would like to
make settings. No product is prepared during this procedure.
i T Press the 1 Espresso button.
WATER 45 ML
g T Turn the Rotary Switch until AROMA öööö is displayed.