JVC GET0626-001B User manual

ESPAÑOL
FRANÇAIS
ENGLISH
Instructions CD RECEIVER KD-A315/KD-R310
GET0626-001B
[J]
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
EN, SP, FR
0909DTSMDTJEIN© 2009 Victor Company of Japan, Limited
For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla,
consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.
CD RECEIVER / RECEPTOR CON CD /
RÉCEPTEUR CD
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
KD-A315 / KD-R310
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
CoverRear_KD-A315[J]ff.indd 1CoverRear_KD-A315[J]ff.indd 1 11/25/09 5:20:56 PM11/25/09 5:20:56 PM

2ENGLISH
INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not approved by JVC could void the user’s authority to operate the
equipment.
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3.CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare
into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not
view directly with optical instruments.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
Warning:
If you need to operate the unit while driving,
be sure to look around carefully or you may be
involved in a traffic accident.
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating
the unit.
EN02-09_KD-A315_R310[J]4.indd 2EN02-09_KD-A315_R310[J]4.indd 2 9/15/09 3:40:47 PM9/15/09 3:40:47 PM

3ENGLISH
How to read this manual
The following icons/symbols are used to
indicate:
Press and hold the button(s)
until the desired operation
begins.
Turn the control dial.
Turn the control dial
to make a selection,
then press to confirm.
( XX) Reference page number
<XXXX> Menu setting item
Continued on the next page
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments
will also be erased (except
the registered Bluetooth
device). ( 10)
How to forcibly eject a disc
• You can forcibly eject the loaded disc even
if the disc is locked. To lock/unlock the disc,
8.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
CONTENTS
3 How to read this manual
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
4 Canceling the display
demonstration
4 Setting the clock
5 Preparing the remote controller
6 Basic operations
7 Listening to the radio
8 Listening to a disc
10 Using Bluetooth® devices
11 Using a Bluetooth mobile phone
13 Using a Bluetooth audio player
15 Listening to the HD Radio™
Broadcast
16 Listening to the satellite radio
18 Listening to the other external
components
19 Selecting a preset sound mode
20 Menu operations
25 Title assignment
26 More about this unit
29 Maintenance
30 Troubleshooting
34 Specifications
Thank you for purchasing a JVC product.
Please read all instructions carefully before
operation, to ensure your complete
understanding and to obtain the best possible
performance from the unit.
[Hold]
[Hold]
EN02-09_KD-A315_R310[J]4.indd 3EN02-09_KD-A315_R310[J]4.indd 3 9/15/09 3:40:47 PM9/15/09 3:40:47 PM

4ENGLISH
1 Turn on the power.
2
3
Setting the clock
1 Turn on the power.
2
3 Select <CLOCK>.
4 Select <CLOCK SET>.
5 Adjust the hour.
6 Adjust the minute.
7 Finish the procedure.
4 Select <DEMO OFF>.
5
6 Finish the procedure.
Canceling the display demonstration
(Initial setting)
[Hold]
(Initial setting)
[Hold]
EN02-09_KD-A315_R310[J]4.indd 4EN02-09_KD-A315_R310[J]4.indd 4 9/15/09 3:40:47 PM9/15/09 3:40:47 PM

5ENGLISH
Warning (to prevent accidents and
damage):
• Do not install any battery other than CR2025
or its equivalent.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct
sunlight for a long time.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
KD-A315 is equipped with the steering wheel
remote control function.
Before operating, connect an exclusive remote
adapter (not supplied) which matches your car
to the steering wheel remote input terminal on
the rear of the unit.
• For details, refer also to the instructions
supplied with the remote adapter.
Preparing the remote controller
When you use the remote controller for the first
time, pull out the insulation sheet.
For USA-California Only:
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material—
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate
If the effectiveness of the remote controller
decreases, replace the battery.
Replacing the lithium coin battery
CR2025
Caution:
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Insulation sheet
EN02-09_KD-A315_R310[J]4.indd 5EN02-09_KD-A315_R310[J]4.indd 5 9/15/09 3:40:48 PM9/15/09 3:40:48 PM

6ENGLISH
Basic operations
Control dialEjects the disc Loading slot
Remote sensor
• DO NOT expose to bright sunlight.
Display window
Auxiliary input jack
Detaches the panel
When you press or hold the following button(s)...
Main unit Remote
controller General operation
Turns on.
• When the power is on, pressing /I/ATT on the remote controller
also mutes the sound or pauses. Press /I/ATT again to cancel
muting or resume playback.
Turns off if pressed and held.
Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.
Adjusts the volume level.
— Selects items.
—
• Mutes the sound during playback. If the source is “CD,” playback
pauses. Press the control dial again to cancel muting or resume
playback.
• Confirms selection.
Selects the sound mode.
• Enters tone level adjustment directly ( 19) if pressed and held
EQ BASS-TRE on the main unit.
—• Enters <COLOR> setting directly ( 22).
• Enters <COLOR SETUP> setting directly ( 22) if pressed and held.
— Returns to the previous menu.
—Power off : Checks the current clock time.
Power on : Changes the display information.
EN02-09_KD-A315_R310[J]f.indd 6EN02-09_KD-A315_R310[J]f.indd 6 9/29/09 5:30:54 PM9/29/09 5:30:54 PM

7ENGLISH
Manual search
“M” flashes, then press
the button repeatedly.
When an FM stereo broadcast is
hard to receive
1
2
] <TUNER> ] <MONO> ]
<MONO ON>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Changing the display information
Station name * = Frequency =
Clock = (back to the beginning)
* If no title is assigned to a station, “NO NAME”
appears for a few seconds. To assign a title to a
station, 25.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
] <TUNER> ] <SSM> ]
<SSM 01 – 06> / <SSM 07 – 12> /
<SSM 13 – 18>
“SSM” flashes and local stations with
the strongest signal are searched and
stored automatically.
To preset another 6 stations, repeat the
above procedure by selecting one of the other
6 SSM setting ranges.
If an HD Radio tuner box is connected ( 15),
you can also search and store 6 stations for AM
by following the above operations.
Listening to the radio
~
] “FM” or “AM”
Ÿ
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
[Hold]
[Hold]
[Hold]
EN02-09_KD-A315_R310[J]f.indd 7EN02-09_KD-A315_R310[J]f.indd 7 9/29/09 5:30:54 PM9/29/09 5:30:54 PM

8ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number “04.”
1
] “92.50MHz”
2[Hold]
“PRESET MODE” flashes.
3
] Selects preset number “04.”
“P04” flashes and “MEMORY” appears.
Selecting a preset station
or
1
2
Using the remote controller
5 U / D ∞ : Changes the preset
stations
2 R / F 3 : Searches for stations
Stopping playback and ejecting
the disc
“NO DISC” appears.
Press / SOURCE to listen to
another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Selects folder of the MP3/WMA
Selects track
Fast-forwards or
reverses the track
Listening to a disc
~
ŸAll tracks will be played repeatedly until you
change the source or eject the disc.
[Hold] [Hold]
EN02-09_KD-A315_R310[J]f.indd 8EN02-09_KD-A315_R310[J]f.indd 8 9/25/09 5:39:48 PM9/25/09 5:39:48 PM

9ENGLISH
Selecting a track/folder
1
2
For MP3/WMA discs, select the desired folder,
then the desired track by repeating step 2.
• To return to the previous menu, press BACK .
Changing the display information
Disc title/Album name/performer (folder
name)* = Track title (file name)* = Current
track number with the elapsed playing time
= Current track number with the clock
time = (back to the beginning)
* If the current disc is an audio CD, “NO NAME”
appears.
If an MP3/WMA file does not have Tag
information or <TAG DISPLAY> is set to
<TAG OFF> ( 21), folder name and file name
appear.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume before
playing a disc to avoid damaging the speakers
by the sudden increase of the output level.
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
2
] “REPEAT” j “RANDOM”
3
REPEAT
TRACK RPT : Repeats current track
FOLDER RPT : Repeats current folder
RANDOM
FOLDER RND : Randomly plays all tracks
of current folder, then
tracks of next folders
ALL RND : Randomly plays all tracks
To cancel repeat play or random play, select
“RPT OFF” or “RND OFF.”
Using the remote controller
5 U / D ∞ : Selects folder of the
MP3/WMA
2 R / F 3 : Selects track
2 R / F 3
[Hold]
: Fast-forwards or
reverses the track
[Hold]
EN02-09_KD-A315_R310[J]f.indd 9EN02-09_KD-A315_R310[J]f.indd 9 9/25/09 5:39:49 PM9/25/09 5:39:49 PM

10 ENGLISH
Using Bluetooth® devices
For Bluetooth operations, it is required to
connect the Bluetooth adapter, KS-BTA200 (not
supplied) to the expansion port on the rear of
this unit.
• Refer to pages iand ii at the end of the
manual to check the countries where you
may use the Bluetooth® function.
• For details, refer also to the instructions
supplied with the Bluetooth adapter and the
Bluetooth device.
To use a Bluetooth device through the unit
(“BT-PHONE” and “BT-AUDIO”) for the first time,
you need to establish a Bluetooth wireless
connection between the unit and the device.
• Once the connection is established, it is
registered on the unit even if you reset your
unit. Up to five devices can be registered in
total.
• Only one device can be connected at a time
for each source (“BT-PHONE” and “BT-AUDIO”).
Registration (Pairing) methods
Use either of the following items (“OPEN” or
“SEARCH” ) in the Bluetooth menu to register
and make the unit ready to establish a new
Bluetooth connection with a device.
“OPEN” : Connection is established by
operating the Bluetooth device.
“SEARCH” : Connection is established by
operating the unit.
Registering using “OPEN”
Preparation: Operate the device to turn on its
Bluetooth function.
1
] “BT-PHONE” or “BT-AUDIO”
2
] “NEW DEVICE” ] “OPEN”
3
] Enter a PIN (Personal Identification
Number) code in to the unit.
You can enter any number you like
(1-digit to 16-digit number).
[Initial: 0000]
• Some devices have their own PIN
code. Enter the specified PIN code in
to the unit.
4Repeat step 3until you have finished
entering the PIN code.
5
“OPEN..” flashes.
6Use the Bluetooth device to search and
connect.
On the device to be connected, enter
the same PIN code you have just
entered for this unit. “CONNECTED”
appears.
Now connection is established and you
can use the device through the unit.
The device remains registered even after you
disconnect the device. Use “CONNECT“ (or
activate “AUTO CNNCT”) to connect the same
device from next time on. ( 11, 14)
EN10-19_KD-A315_R310[J]5.indd 10EN10-19_KD-A315_R310[J]5.indd 10 9/17/09 9:23:47 AM9/17/09 9:23:47 AM

11ENGLISH
Registering a device
(“SEARCH”/“SPECIAL”)
1
] “BT-PHONE” or “BT-AUDIO”
2
] “NEW DEVICE”
3
] “SEARCH” : To search for available
devices
The unit searches and displays the list
of the available devices. “UNFOUND”
appears if no available device is
detected.
– – – – – or – – – – –
] “SPECIAL” : To connect a special
device
The unit displays the list of the preset
devices.
4
] Select a device you want to connect.
5For available devices...
] Enter the specific PIN code of the
device to the unit.
• Refer to the instructions supplied with
the device to check the PIN code.
Use the Bluetooth device to connect.
Now connection is established and you
can use the device through the unit.
For special device...
Use “OPEN” or “SEARCH” to connect.
Connecting/disconnecting/
deleting a registered device
1
] “BT-PHONE” or “BT-AUDIO”
2
] Select a device you want to
connect/disconnect/delete.
3
] “CONNECT” or “DISCONNECT” : To
connect/disconnect the selected device
– – – – – or – – – – –
] “DELETE” ] “YES” : To delete the
selected device
You can set the unit to connect the Bluetooth
device automatically when the unit is turned
on. (“AUTO CNNCT,” 14)
Using a Bluetooth
mobile phone
~
] “BT-PHONE”
Ÿ
] Bluetooth menu
!Make a call or setting using
the Bluetooth setting menu.
( 13)
EN10-19_KD-A315_R310[J]f.indd 11EN10-19_KD-A315_R310[J]f.indd 11 9/30/09 3:22:45 PM9/30/09 3:22:45 PM

12 ENGLISH
3
] Select “DIAL” menu.
4
] Select a calling method.
PHONE BOOK*MISSED*
NUMBER VOICE DIAL
REDIAL*RECEIVED* (back to
the beginning)
5For REDIAL, RECEIVED, MISSED
] Repeat step 4to select a name (if it is
acquired) or a phone number.
For PHONE BOOK
] Repeat step 4to select a name or a
phone number.
For NUMBER
] Enter a phone number.
] Confirm.
For VOICE DIAL
] Speak the name you want to call
when “SAY NAME” appears.
• If your mobile phone does not support
the voice recognition system, “ERROR”
appears.
• Using voice tags may be difficult in
a noisy environment or during an
emergency.
• To return to the previous menu, press
5 .
* Displays only when your mobile phone is
equipped with these functions and is compatible
with this unit.
When a call comes in....
The source is automatically changed to
“BT-PHONE.”
• The display will flash in blue. (<RING COLOR>,
22)
When “AUTO ANSWER” is activated....
The unit answers the incoming calls
automatically. ( 14)
• When “AUTO ANSWER” is deactivated, press
any button (except / SOURCE / / 0 ) to
answer the incoming call.
• You can adjust the microphone volume level.
( 14)
To end the call
Hold any button (except / SOURCE / / 0 ).
When a text message comes in....
If the mobile phone is compatible with text
message (notified through JVC Bluetooth
adapter) and “MSG INFO” (message info) is
set to “AUTOMATIC” ( 14), the unit rings to
inform you of the message arrival.
• “RCV MESSAGE” (receiving message) appears
and the display illuminate in blue. (<RING
COLOR>, 22)
Using the remote controller
5 U / D ∞ /
2 R / F 3 / SOURCE
: Answers calls
5 U / D ∞ /
2 R / F 3 / SOURCE
[Hold]
: Rejects calls
Making a call
1
] “BT-PHONE”
2
EN10-19_KD-A315_R310[J]f.indd 12EN10-19_KD-A315_R310[J]f.indd 12 9/30/09 3:22:45 PM9/30/09 3:22:45 PM

13ENGLISH
Using a Bluetooth audio
player
] “BT-AUDIO”
If playback does not start, operate the
Bluetooth audio player to start playback.
Operate the Bluetooth audio player to
pause (if playback does not pause when you
change the source).
Reverse skips/forward
skips
Pauses/starts playback*
* Operation may be different
according to the connected
Bluetooth audio player.
Enter setting menu (Device
list)
For connecting/disconnecting/deleting a
registered device, 11.
Using the remote controller
2 R / F 3 : Reverse skips/forward
skips
Changing the Bluetooth settings
1
] “BT-PHONE” or “BT-AUDIO”
2
] Bluetooth menu
3
] “SETTINGS”
4
] Select a setting item.
AUTO CNNCT Ô AUTO ANSWER* 1
Ô MSG INFO* 2 Ô MIC SETTING* 1
Ô VERSION* 3 Ô (back to the
beginning)
5
] Change the setting accordingly. For
setting menu, 14.
*1 Appears only when a Bluetooth phone is
connected.
*2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message (notified through JVC Bluetooth
adapter).
*3 Bluetooth Audio: Shows only “Version.”
EN10-19_KD-A315_R310[J]4.indd 13EN10-19_KD-A315_R310[J]4.indd 13 9/15/09 3:39:02 PM9/15/09 3:39:02 PM

14 ENGLISH
Warning messages
ERROR CNNCT (Error Connection)
The device is registered but the connection
has failed. Use “CONNECT” to connect the
device again. ( 11)
ERROR
Try the operation again. If “ERROR” appears
again, check if the device supports the
function you have tried.
UNFOUND
No available Bluetooth device is detected
by “SEARCH.”
LOADING*
The unit is updating the phone book.
PLEASE WAIT
The unit is preparing to use the Bluetooth
function. If the message does not disappear,
turn off and turn on the unit, then connect
the device again (or reset the unit).
RESET 8
Check the connection between the adapter
and this unit.
* Displays only when your mobile phone
is equipped with these functions and is
compatible with this unit.
Bluetooth Information:
If you wish to receive more information
about Bluetooth, visit the following JVC web
site: <http://www.jvc.co.jp/english/car/>
(English website only)
Setting menu ( : Initial)
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth
device found at first.
AUTO ANSWER
Only for the device being connected for
“BT PHONE.”
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls
manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for
“BT-PHONE.”
AUTOMATIC: The unit informs you of the
arrival of a message by ringing
and displaying “RCV MESSAGE”
(receiving message).
• The display illuminate in blue.
(<RING COLOR>, 22)
MANUAL: The unit does not inform you of
the arrival of a message.
MIC SETTING (microphone setting)
Only for the device being connected for
“BT-PHONE.” Adjust microphone volume
connected to the Bluetooth adapter,
[LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions
are shown.
EN10-19_KD-A315_R310[J]4.indd 14EN10-19_KD-A315_R310[J]4.indd 14 9/15/09 3:39:03 PM9/15/09 3:39:03 PM

15ENGLISH
Listening to the HD Radio™ Broadcast
Before operating, connect HD Radio tuner box,
KT-HD300 (not supplied) to the expansion port
on the rear of the unit.
• For details, refer also to the instructions
supplied with the HD Radio tuner box.
What is HD Radio Technology?
HD Radio Technology can deliver high-quality
digital sound—AM digital will have FM-like
quality (in stereo) and FM digital will have
CD-like quality—with static-free and clear
reception. Furthermore, stations can offer text
and data, such as artist names and song titles.
• When the HD Radio tuner box is connected,
it can also receive conventional analog
broadcasts.
• Many HD Radio stations also offer more than
one channel of programming. This service is
called multicasting.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com/>.
For basic radio operations, 7, 8.
When receiving...
An HD Radio station
Station Call Sign appears.
HD Radio multicast channels
Select your desired channel.
HD1 HD2 .... HD8
(back to the beginning)
“LINKING” appears while linking to a multicast
channel.
Searching for HD Radio stations
only
“HD” flashes.
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically
due to the receiving condition.
While listening to an HD Radio station...
1
2
] <TUNER> ] <BLEND HOLD> ]
<AUTO> / <DIGITAL> / <ANALOG>
“HD” lights up when holding the digital
reception or flashes when holding the
analog reception.
• If no sound can be heard with <AUTO>,
change the setting to <ANALOG> or
<DIGITAL>.
• The setting automatically changes to <AUTO>
if you tune in to or change to another station,
or if you turn off the power.
Lights up when digital audio is broadcast
Flashes when analog audio is broadcast
Channel number
First four letters of Call Sign
[Hold]
[Hold]
EN10-19_KD-A315_R310[J]4.indd 15EN10-19_KD-A315_R310[J]4.indd 15 9/15/09 3:39:03 PM9/15/09 3:39:03 PM

16 ENGLISH
Listening to the satellite radio
Before operating, connect either one of
the following systems (not supplied) to the
expansion port on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SC-C1 and KS-SRA100
• PnP, SC-VDOC1 and KS-SRA100
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVC100)
• CNP2000UC and CNPJVC1
• For details, refer also to the instructions
supplied with the other components.
GCI (Global Control Information)
update
• If channels are updated after subscription,
updating starts automatically. “UPDATING”
flashes and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your
satellite radio.
Changing the display information
Call Sign *1 = Frequency =
Title/artist/album name of the
current segment *2
= Clock =
(back to the beginning)
*1 “ **** -FM” or “ **** ” appears when no Call Sign
is received.
*2 “NO TEXT” appears when no text is received.
~
] “SIRIUS” or “XM”
Ÿ
] Select a category.
SIRIUS: If you select “ALL,” you can
tune in to all the channels of all
categories.
!
] Select a channel to listen.
Holding the button changes the
channels rapidly.
While searching, invalid and
unsubscribed channels are skipped.
XM: If you do not select a channel
within 15 seconds, category selected
in step Ÿ is canceled. You can select
all channels of all categories now
(including non-categorised channels).
• This setting cannot take effect for the
conventional FM/AM stations.
• If the radio station forces the reception mode
to digital, the HOLD indicator flashes.
Using the remote controller
5 U / D ∞ : Changes the preset
stations
2 R / F 3 : Searches for stations
EN10-19_KD-A315_R310[J]4.indd 16EN10-19_KD-A315_R310[J]4.indd 16 9/15/09 3:39:03 PM9/15/09 3:39:03 PM

17ENGLISH
Activate your SIRIUS subscription after
connection
1
] “SIRIUS”
SIRIUS Satellite radio starts updating all
the SIRIUS channels. Once completed,
SIRIUS Satellite radio tunes in to the
preset channel, CH184.
2Check your SIRIUS ID. ( 21)
3Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-SIRIUS
(7474).
• “SUB UPDT PRESS ANY KEY” scrolls on
the display once subscription has been
completed.
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available
before activation.
1
] “XM”
XMDirect™ Tuner Box or XMDirect2
Tuner System starts updating all the
XM channels. “Channel 1” is tuned in
automatically.
2Check your XM Satellite radio ID labelled
on the casing of the XMDirect™ Tuner
Box or XMDirect2 Tuner System, or tune
in to “Channel 0”. ( right column)
3Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription, or you can call 1-800-XM-
RADIO (1-800-967-2346).
• Once completed, the unit tunes in to
one of the available channels (Channel
4 or higher).
Storing channels in memory
You can preset up to 18 channels for both
SIRIUS and XM.
Ex.: Storing channel into preset number “04.”
1Tune in to a channel you want to store.
(Steps ~ – ! , 16.)
2
“PRESET MODE” flashes.
3
] Select preset number “04.”
“P04” flashes and “MEMORY” appears.
Selecting SIRIUS/XM preset
station
1
2
Checking the satellite radio ID
While selecting “SIRIUS” or “XM”...
] Select “Channel 0.”
SIRIUS: SIRIUS identification number is
displayed after “Channel 0” is selected.
XM: The display alternately shows “RADIO ID”
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than “Channel 0.”
[Hold]
EN10-19_KD-A315_R310[J]ff.indd 17EN10-19_KD-A315_R310[J]ff.indd 17 11/23/09 5:08:03 PM11/23/09 5:08:03 PM

18 ENGLISH
Listening to the other external
components
You can connect an external component to:
• EXT INPUT: Expansion port on the rear of
this unit using the following adapters (not
supplied):
–KS-U57, Line Input Adapter
–KS-U58, AUX Input Adapter
Preparation: Make sure <EXT ON> is selected
for the <SRC SELECT> = <EXT IN> setting.
( 24)
• AUX IN: AUX (auxiliary) input jack on the
control panel.
Preparation: Make sure <AUX ON> is
selected for the <SRC SELECT> = <AUX IN>
setting. ( 24)
• For details, refer also to the instructions
supplied with the adapter or external
components.
~
] “EXT INPUT” or “AUX IN”
ŸTurn on the connected component
and start playing the source.
!
] Adjust the volume.
⁄Adjust the sound as you
want. ( 19)
Changing the display information
Category name = Channel name
= Artist name = Composer
name * = Song/program name/
title = Clock = (back to the
beginning)
* Only for SIRIUS Satellite radio.
Connecting an external component to the AUX input jack
3.5 mm (3/16”) stereo mini
plug (not supplied)
Portable audio player,
etc.
Using the remote controller
5 U / D ∞ : Changes the
categories
2 R / F 3 : Changes the channels
2 R / F 3
[Hold]
: Changes the channels
rapidly
EN10-19_KD-A315_R310[J]f.indd 18EN10-19_KD-A315_R310[J]f.indd 18 9/25/09 5:41:05 PM9/25/09 5:41:05 PM

19ENGLISH
Selecting a preset sound mode
You can select a preset sound mode suitable
for the music genre.
FLAT = NATURAL = DYNAMIC = VOCAL
BOOST
= BASS BOOST = USER = (back to
the beginning)
While listening, you can adjust the tone level of
the selected sound mode.
1
2
Adjust the level (–06 to +06) of the
selected tone (BASS / MIDDLE / TREBLE).
The sound mode is automatically stored
and changed to “USER.”
Tone Sound element
Frequency Level Q
BASS 60 Hz
80 Hz
100 Hz
200 Hz
–06 to +06 Q1.0
Q1.25
Q1.5
Q2.0
MIDDLE 0.5 kHz
1.0 kHz
1.5 kHz
2.5 kHz
–06 to +06 Q0.75
Q1.0
Q1.25
TREBLE 10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
–06 to +06 Q FIX
Storing your own sound mode
You can store your own adjustments in
memory.
1
2
] <PRO EQ> ] <BASS> / <MIDDLE> /
<TREBLE>
3
Adjust the sound elements of the
selected tone. ( table on the left)
4Repeat steps 2and 3to adjust other
tones.
The adjustments made will be stored
automatically in “USER.”
The current sound mode changes to “USER”
automatically.
[Hold]
[Hold]
EN10-19_KD-A315_R310[J]4.indd 19EN10-19_KD-A315_R310[J]4.indd 19 9/15/09 3:39:04 PM9/15/09 3:39:04 PM

20 ENGLISH
Menu operations
1 2 3 Repeat step 2if necessary.
• To return to the previous menu,
press BACK .
• To exit from the menu, press DISP
or MENU .
Category Menu item Selectable setting, [Initial: Underlined]
DEMO
DEMO
Display
demonstration
• DEMO ON
• DEMO OFF
: Display demonstration will be activated
automatically if no operation is done for about
20 seconds. ( 4)
: Cancels.
CLOCK
CLOCK SET
Clock setting
—
[1:00]
: Adjust the hour, then the minute. ( 4)
CLOCK ADJ *1
Clock
adjustment
• AUTO
• OFF
: The built-in clock is automatically adjusted using
the clock data provided via the satellite radio
channel.
: Cancels.
TIME ZONE *1, *2EASTERN,
ATLANTIC,
NEWFOUND,
ALASKA,
PACIFIC,
MOUNTAIN,
CENTRAL
: Select your residential area from one of the time
zones for clock adjustment.
DST *1, *2
Daylight savings
time
• DST ON
• DST OFF
: Activates daylight savings time if your residential
area is subject to DST.
: Cancels.
PRO EQ
BASS —: For settings, 19.
MIDDLE
TREBLE
*1 Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.
*2 Displayed only when <CLOCK ADJ> is set to <AUTO>.
[Hold]
EN20-27_KD-A315_R310[J]4.indd 20EN20-27_KD-A315_R310[J]4.indd 20 9/15/09 3:38:32 PM9/15/09 3:38:32 PM