JVC KD-AHD59 - Radio / HD User manual

@
o
AIIP3
W'A-fA
illJo~@
DIGITAL AUDIO
ITEXT I
KD-AH D59/KD-HDR50
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
..lye
H»Radio"
~
'RADio""
READY
IQl Madefor
@J iPod OWorks
with
iPhone
For canceling the display demonstration, see page 7.
Para cancelar la demostraci6n en pantalla, consulte la pagina 7.
Pour annuler la demonstration des affichages, referez-vous a la page 7.
For installation and connections, refer to the separate manual.
Para la instalaci6n y las conexiones, refierase al manual separado.
Pour I'installation et les raccordements, se referer au manuel separe.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCT/ONS
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
reference.
Model No.
Serial No.
LVT1942-001 A
[J]

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
INFORMATION (For U.S.A.l
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiolTV technician for help.
Caution:
Changes or modifications not approved by JVC could void the user's authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1. ClASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: (For U.s.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
CAUTION ATTENTION AVISO
VARNING
J:±.
CAUTION
VISIBLE AND I DR
RAYONNEMENT LASER RADIACION LASER
SYNUG OCH/ELLER ;:;:fl«:iiJll VISIBLE AN 0I OR
INVISIBLE CLASS 1M VISIBlE ET I OU
DE ClASE 1M OSYNUG
111/lt:ll:fiiJlI
INVISIBLE CLASS n
LASER RADIATION
INVISIBLE DE ClASSE
~~/~J~rsIBLE
LASERSTWNING.
0)17A1M LASER RADIATION
WHEN OPEN. DO NOT 1M UNE FOIS OUVERT. KLASS 1 M, NAIl DENNA
v-1-lUtbl
WHEN OPEN.
VIEW DIlECTLY WITH NE PAS REGAROER ABIERTO. NO MIRAR DEl. AR OPPNAO.
WH. 00
NOT STARE
OPTICAl INSTRUMENTS. DIRECTEMENT AVEC DIRECTAMENTE BETRAKTA EJ
1t!j!"~.11
INTO BEAM.
EC60825-1:2001 DES INSTRUMENTS
~STRUMENTAl
STRALEN MED ll'TlSKA
l"~\~<t.:~~'.
FDA 21 em
(ENG) OPTIOUES. (FAA) • (ESP) INSTRUMENT. (SWE) lJPN) (ENG)
[European Union only]
For safety ...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Warning:
If you need to operate the unit while driving, be sure to
look around carefully or you may be involved in a traffic
accident.
2
Temperature inside the car ...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.

Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. lower the volume before
playing these digital sources to avoid damaging the
speakers by the sudden increase of the output level.
How to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth devices, see page 14).
• How to forcibly eject a disc
<!>/ATT
• [H;ld]
• You can forcibly eject the loaded disc even if the disc is
locked. To lock/unlock the disc, see page 12.
• Be careful not to drop the disc when it ejects.
•If this does not work, reset your unit.
Attaching ...
Detaching ...
• Detaching/attaching control panel '. E:O'NTENlSE;
--"-,,, __ ""--_1]
3

Basic operations
[ID Eject disc.
[ill Select the sound mode.
[Q] Detach the panel.
[TI] • FM/AMlSIRIUSIXM: Search for station/channel.
• CD/USB/USB-IPOD/CD-CH: Select track.
• IPOD: Select category/track.
• BT PHONE/BT AUDIO: Select setting item/
registered device.
[Jl] Change the display information.
[J] • Return to the previous menu.
• USB-I POD: Switch the setting between "HEAD
MODE" and "IPOD MODE"*6 [Hold].
[1J • Tag the PSD (Program Service Data) from HD
Radio broadcast.
• USB-I POD: Cancel transferring the tagged PSD
to your iPod/iPhone [Hold].
[j]] Remote sensor
[l§] AUX (auxiliary) input jack
[Z] USB (f) terminal
*1 Also known as "[ontrol dial" in this manual.
*2 You cannot select these sources if they were disabled
in Menu (see ''SELECT SRC" on page 31).
*3 You cannot select these sources if they are not ready or
not connected.
*4 When connecting the iPod/iPhone to the USB (f)
terminal, "USB" appears on the display first, then
"USB-IPOD."
*5 You can still adjust the volume during pause when the
selected source is CD/USB/USB-IPOD.
Before resume playback, check to be sure that you
have not raised the volume too much.
*6 You can use this function when '1POD MODE" is
available for the connected iPodliPhone.
1-*-1-
IT] • FM/AM:
- Select HD Radio™ multicast channel.
- Search for HD Radio stations only [Hold].
• SIRIUS/XM: Select category.
• CD/USB/CD-CH: Select folder.
• IPOD: Enter the main menu/Pause playback!
Confirm selection.
• BT PHONE/BT AUDIO: Enter/go back to
previous Bluetooth menu.
W• Turn on the power.
• Attenuate the sound (if the power is on).
• Turn off the power [Hold].
W• Select the source.
FM -+ AM*2 -+ SIRIUS*3/XM*3 -+ CD*3
-+USB/USB-IPOD*3, *4 -+ CD-CH*3/IPOD*3 (or
EXT INPUT) -+ BT PHONE*3 -+ BT AUDIO*3 -+
AUX IN*2 -+ (back to the beginning)
• Enter the DIAL menu when the Bluetooth cellular
phone is connected [Hold].
[I] . FM/AM/SIRIUS/XM/CD/USB/CD-CH: Enter list
operations.
• Enter Menu setting [Hold].
• USB-I POD: Enter the main menu of the iPod/
iPhone.
[[] • Control the volume*5 or select items [Turn].
• Confirm the selection [Press].
• FM/AM: Enter SSM preset mode [Hold].
• CD/USB/USB-IPOD: Pause/resume playback*5
[Press].
• CD/USB/USB-IPOD/CD-CH/IPOD: Enter
playback mode [Hold].
[]] loading slot
[I] Display window
4

Display window
12
OJ Status of Bluetooth device
(Device number, [P: 1- 5]; signal strength,
['r.,': 0- 3]*; battery reminder, [~: 0- 3]*)
[1J Tr (track) indicator
[I] Source display I Preset number I Disc number I
Track number I Folder number I Setting and list
operation information
[I] f (USB) indicator
W ~ (iPod/iPhone) indicator
[§] HD (HD Radio™ broadcast) indicator
[I] Playback mode I item indicators-RND (random), * As the number increases, the signal/battery power
• (disc), at (folder), RPT (repeat) becomes stronger.
(You can change the display and button illumination (see page 32). )
OPERATIONS
o
~~~l~
Remote sensor
Continued on the next page
5
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
If the effectiveness of the remote controller
decreases, replace the battery.
Caution:
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
Using the remote controller (RM-RKSO) _
Installing the lithium coin battery (CR202S1

OJ • Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
[1] • Selects the preset radio station if pressed briefly.
• Selects HD Radio multicast channel if pressed
and held.
• Changes the folder of the MP3/WMA.
• While playing an MP3 disc on an
MP3-compatible CD changer:
- Changes the disc if pressed briefly.
- Changes the folder if pressed and held.
• While listening to the Satellite (SIRIUS or XM)
Radio:
- Changes the categories.
• While listening to an iPod (connected with the
interface adapter):
- Pauses or resumes playback with D T.
- Enters the main menu with .. U.
(Now .. U/D T / ~ R/F ~ work as the menu
selecting buttons.)*
W Adjusts the volume level.
rn Selects the sound mode.
l]] Selects the source.
[]] For Bluetooth cellular phone:
- Answers calls if pressed briefly.
- Ends or rejects calls if pressed and held.
6
m· Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if pressed and
held.
• Changes the tracks if pressed briefly.
• While listening to the Satellite Radio:
- Changes the channels if pressed briefly.
- Changes the channels rapidly if pressed and
held.
• While listening to an iPod connected with the
interface adapter (in menu selecting mode):
- Selects an item if pressed briefly. (Then, press
DT to confirm the selection.)
- Skips 10 items at a time if pressed and held.
• Reverse skip/forward skip for Bluetooth audio
player.
* .A. U: Returns to the previous menu.
oT : (onnrms the selection.
Warning (to prevent accidents and damageh
• Do not install any battery other than CR2025 or its
equivalent.
• Do not leave the remote controller in a place (such
as dashboards) exposed to direct sunlight for a long
time.
• Store the battery in a place where children cannot
reach.
• Do not recharge, short, disassemble, heat the battery,
or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
KD-AHD59 is equipped with the steering wheel
remote control function .
• See the Installation/Connection Manual (separate
volume) for connection.

Changing the display information _
....
• When the power is turned off: The current clock time is displayed if "CLOCK DISP" is set to "CLOCK OFF"
(see page 28).
• When the power is turned on: The display information of the current source changes as follows:
FM/AM Call Sign*l ..... Frequency ..... PTY (Program Type)*2 ..... Text*3 ..... Clock ..... (back to the
beginning)
CD/USB
ICD·CH
• Audio CD/CD Text:
Disc title/performer*4 ..... Track title*4 ..... Current track number with the elapsed playing
time ..... Current track number with the clock time ..... (back to the beginning)
• MP3/WMA:
Album name/performer (folder name)*5 ..... Track title (file name)*5 ..... Current track number
with the elapsed playing time ..... Current track number with the clock time ..... (back to the
beginning)
USB·IPOD Album name/artist name ..... Track title ..... Current track number with the elapsed playing
time Current track number with the clock time ..... Current status of transferring the tagged
PSDs*6 (back to the beginning)
IPOD Album name/artist name ..... Track name ..... Current track number with the elapsed playing
time ..... Current track number with the clock time ..... (back to the beginning)
SIRIUSIXM Category name ..... Channel name ..... Artist name ..... Composer name*7 ..... Song/program
name/title ..... Clock ..... (back to the beginning)
*1 Displayed only when a Call Sign is received.
*2 When no program type (PTY) is received, "HD RADIO" appears for HD Radio broadcasting, and ''ANALOG'' appears for
conventional FM/AM broadcasting.
*3 "NO TEXT" appears when no text is received.
*4 If the current disc is an audio CD, "NO NAME" appears.
*5 lfanMP3IWMA file does not have Taginformationor'TAG DISPLAY"issetto 'TAG OFF"(seepage29),
fuMername andfik name appear.
*6 Only while transferring the tagged PSDs is in progress (see page 24).
*7 Only for SIRIUS Satellite Radio.
Preparation
• Canceling the display demonstration and setting the clock
• See also page 28.
[Hold]
Press and hold until Menu is
called up.
[Turn] ~ [Press]
• Repeat this procedure.
Turn on the power.
Cancel the display demonstrations
Select "DEMO," then "DEMO OFF."
Set the clock
Select "CLOCK" ..... "CLOCK SET."
Adjust the hour, then press the Control dial once to
proceed to adjust the minute.
• To return to the previous menu, press BACK.
OPERATIONS
7

Listening to the radio
You can tune in to both conventional and HD Radio broadcasts .
• If you want to search for HD Radio stations only, see "Searching for HD Radio stations only" on page 9.
What is HD Radio™ broadcasting?
HD Radio stations can deliver high-quality digital sound-AM digital will have FM-Iike sound quality (in stereo)
and FM digital will have CD-like sound quality-with static-free and clear reception. Furthermore, stations can
offer text and data, such as artist names, song titles, and Program Service Data (PSD).
• HD Radio tuners can also tune in to conventional analog broadcasts.
• Many HD Radio stations offer more than one channel of programming. This service is called multicasting.
• By using PSD, you can easily purchase the songs at iTunes Store .
• To find HD Radio stations in your area, visit <http://www.hdradio.com/>.
Select "FM" or IIAM."
Station Call Sign
Ex.: When receiving an HD Radio
station
Lights up when a digital audio is broadcast.
Flashes when an analog audio is broadcast.
Selected frequency
Ex.: When receiving a conventional FM
station
Search for a station to listen-Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same
button again.
• You can also search for a station manually-Manual Search. Hold either one of
the buttons until"M" flashes on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST
indicator lights up on the display .
• When the TAG indicator lights up on the display, you can tag the song for your
future purchase at iTunes Store (see page 24).
.. ~ •.
8

[Turn] ..... [Press]
[Turn] ..... [Press]
• Repeat this procedure.
Select "TUNER" -+ "BLEND HOLD"
-+ "AUTO/DIGITAL/ANALOG"
Lights up when holding the digital reception.
Flashes when holding the analog reception.
• If no sound can be heard with" AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "AUTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
While listening to an HD Radio station ...
• See also page 29.
[Hold]
The menu is called up.
4 Selert "MONO ON."
Reception improves, but stereo effect will be lost.
• The ST indicator goes off.
To restore the stereo effert, repeat the same
procedure to select "MONO OFF."
• Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
[Turn] ..... [Press]
[Turn] ..... [Press]
When a station is tuned in, searching stops.
2Selert'7UNER."
3 Selert "MONO."
~¥WXYi4~
Channel number
• Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 29.
1 Call up the menu.
• 'liNKING" appears while linking to a multicast
channel.
• Searching for HD Radio stations
only
\ I~~ ( [Hold]
Selert your desired channel.
\ I~:~l ( CHD1-HD2.h-HD8:J
• When receiving HD Radio multicast
channels ...
OPERATIONS
9

Storing stations in memory
You can preset up to 18 stations for FM and 6 stations
for AM .
• The HD Radio multicast channels can also be preset.
Automatic presetting -SSM (Strong-station
Sequential Memory}
1 While listening to a radio •.•
[Hold]
2 Selert the preset number range you want to
store.
[Turn]
• For FM: SSM 01-06 .... SSM 07-12 ....
SSM 13-18
• For AM: SSM 01-06
Manual presetting
Ex.: Storing FM station of 92.50 MHz into preset number
"P04."
1 Tune in to the station or channel you want to
preset.
2 Selert a preset number.
[Turn]
3
[Hold]
• Seleding preset station/channel
3
[Press]
Local stations with the strongest signals are
searched and stored automatically.
• To stop searching, press MENU.
To preset other 6 stations, repeat from step 1 again.
[Turn] -+ [Press]
10 _

• Tagging your favorite songs
Some HD Radio broadcasts provide PSD (Program
Service Data) for a song. You can tag the song and
store its PSD (maximum 60 songs) while listening the
song- iTunes Tagging.
• For details how to purchase the tagged songs, see
page 24.
While listening to the song {with the TAG indicator lit
on the display) ...
The TAG indicator start flashing, then the PSD of the
song is stored into the memory.
• When pressing TAG within 10 seconds before or after
the PSD changes, the tags for two songs are stored.
I· 71 st song 7£'ii;W§ij;~;H;;:ux;';*bs~2nd song --+1
PSD {Program (10 sec.) (10 sec.)
Service Data) •
Pressing TAG during this
period tags PSD of both 1 st
and 2nd songs.
• You cannot tag a song in the following cases:
- When the broadcast currently received does not
support the iTunes Tagging.
- When the broadcast does not provide PSD. (TAG
indicator does not light up.)
- When you try to store the 61st PSD. ("MEMORY
FULL" appears.)
- When you try to tag the song for the 2nd time
while receiving one song. ("TAG ALREADY SAVED"
appears.)
- While transferring the tagged PSDs to your iPod/
iPhone is in progress.
To check the number of tagged songs stored
on the unit
[Hold]
To clear the tagged songs from the unit
• See also page 31.
[Hold]
The menu is called up.
[Turn] -. [Hold]
Select ''TAG ALL CLR."
See page 36 about warning messages for iTunes
Tagging.
, OPERATIONS
11

Disc/USB operations
Turn on the power.
Insert a disc.
All tracks will be played repeatedly until you change the source or eject
the disc.
Stop playing and ejecting the disc
•
• "NO DISC" appears.
Press SRC to listen to another playback source.
Prohibiting disc ejection
+.
[Hold]
To cancel the prohibition, repeat the same
procedure.
Playing a file on USB device _
This unit can play MP3IWMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HOD, etc. to
the unit.
• You can also connect the iPod/iPhone to the USB terminal ofthe unit. For details of the operations, see page 21.
Turn on the power.
Connect a USB.
All tracks will be played repeatedly until you
change the source or disconnect a device .
• The '1' indicator lights up on the display .
• You cannot connect a computer to the USB ('1')
terminal of the unit.
12

Caution:
• Avoid using the USB device ifit might hinder your safety driving.
• Do not pull out and attach the USB device repeatedly while "READING" is flashing on the display.
• Do not start the car engine ifa USB device is connected.
• Stop playback before disconnecting a USB device.
• Make sure all important data has been backed up to avoid losing the data.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
• For more details about USB operations, see page 34.
[Turn] -+ [Press]
[Turn] -+ [Press]
[Hold]
The playback mode menu is called
up.
I REPEAT ..... RANDOM I
MP3/WMA: Randomly plays all tracks
of current folder, then tracks of next
folders
ALL RND Disc: Randomly plays all tracks
FOLDER RPT MP3/WMA: Repeats all tracks of
current folder
TRACK RPT Repeats current track
• To cancel repeat play or random play, select
"RPT OFF" or "RND OFF."
• To return to the previous menu, press BACK.
3
2
• Selecting the playback modes
You can use only one of the following playback modes
at a time.
1
[Press]: Select track
[Hold]: Reverse/fast-forward track
[Press]: Pause/resume playback
MP3/WMA: Select folder
[Turn] -+ [Press]*
Pressing (or holding) the following buttons allows you
to ...
Disc/file operations _
• Selecting a track/folder
* For MP3IWMA, select the desired folder, then the
desired track by repeating this procedure.
.• To return to the previous menu, press BACK.
OPERATIONS
13

Using the Bluetooth® devices
For Bluetooth operations, it is required to connect the
Bluetooth adapter (KS-BTA200) (not supplied) to the
CD changer jack on the rear of this unit.
• Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth(!l
function.
To use a Bluetooth device through the unit ("BT PHONE"
and "BT AUDIO") for the first time, you need to establish
Bluetooth wireless connection between the unit and
the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at a time for each
source ("BT PHONE" and "BT AUDIO").
See page 35 about warning messages for Bluetooth
operations.
• Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select "BT PHONE" or "BT AUDIO" as the source to
operate the Bluetooth menu.
OPEN Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
SEARCH Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
14
Registering using "OPEN"
Preparation: Operate the device to turn on its
Bluetooth function.
1 Select "BY PHONE" or "BY AUDIO."
..,
2 Select "NEW DEVICE."
3 Select "OPEN."
4 Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1 -digit to
16-digit number). [Initial: 0000]
- Some devices have their own PIN code. Enter
the specified PIN code to the unit.
IT] Move to the next (or previous) number
position.
[Turn]
W Repeat steps IT] and W until you finish
entering a PIN code.
[I] Confirm the entry.
~
"OPEN .. " flashes on the display.

5 Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit. .
"CONNEOED" appears on the display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use "CONN EO" (or activate
"AUTO CNNO") to connect the same device from
next time on. (See the following and page 27.)
Connecting a device
1 Select "BT PHONE" or "BT AUDIO."
".'"
2 Select "NEW DEVICE."
3 To search for available devices:
Select "SEARCH."
The unit searches and displays the list of the
available devices. If no available device is detected,
"UNFOUND" appears.
To connect a special device:
Select "SPECIAL."
The unit displays the list of the preset devices.
4 Select a device you want to connect.
~.~
5 For available devices ...
IT] Enter the specific PIN code of the device to the
unit.
Refer to the instructions supplied with the
device to check the PIN code.
[1] Use the Bluetooth device to connect.
Now connection is established and you can use
the device through the unit.
For special device ...
Use "OPEN" or "SEARCH" to connect.
Connecting/disconnecting/deleting a
registered device
1 Select "BT PHONE" or "BT AUDIO."
,.."
2 Select a registered device you want to
connect/disconnect/delete.
3 To connect/disconnect the selected device:
Select "CONNECT" or "DISCONNECT."
To delete the selected device:
Select "DELETE," then "VES."
You can set the unit to connect the Bluetooth
device automatically when the unit is turned on.
(See "AUTO CNNO" on page 27.)
EXTERNAL DEVICES
15

Using the Bluetooth cellular phone _
,." Select "BY PHONE."
Enter the Bluetooth menu.
Make a call or setting using the Bluetooth setting menu.
(See the following and page 27.)
When a call comes in ••.
The source is automatically changed to "BT PHONE."
• The display will flash in blue (see "RING COLOR"
on page 30.)
When "AUTO ANSWER" is activated ...
The unit answers the incoming calls automatically, see
page 27.
• When" AUTO ANSWER" is deactivated, press any
button (excepto/An/~~) to answer the
incoming call.
• You can adjust the microphone volume level (see
"MIC SETTING" on page 27).
To end the call
Hold any button (excepto/An/~~).
When a text message comes in ...
If the cellular phone is compatible with text message
(notified through JVC Bluetooth adapter) and "MSG
INFO" (message info) is set to "AUTO" (see page 27), the
unit rings to inform you ofthe message arrival.
• "RCV MSG" (receiving message) appears on the
display and the display illuminate in blue (see
"RING COLOR" on page 30.)
16
• Making a call
You can make a call using the following methods .
Select "BT PHONE," then follow the following steps to
make a call:
• To return to the previous menu, press ....
1 Enter the "DIAL" menu.
2 Select a calling method.
~ PHONE BOOK -MISSED- NUMBER~
L-.RECEIVED-REDIAl-VOICE --J
Call history:
ITJ Select a call history (REDIAL *, RECEIVED*,
MISSED*).
[II Then select a name (if it is acqui red) or phone
number.
Phone book:
ITJ Select "PHONE BOOK*."
The list of phone number appears.
[II Select a name from the list.
* Displays only when your cellular phone is
eqUipped with these functions and is compatible
with this unit.

Direct dialing:
II] Select "NUMBER."
[Turn]
ITl Move to the next (or previous) number
position.
[I] Repeat steps [1] and ITl until you finish
entering the phone number.
[§]
~
Voice dialing:
II] Select "VOICE."
"SAY NAME" appears on the display.
[1] Speak the name you want to call.
•If your cellular phone does not support the
voice recognition system, "ERROR" appears
on the display.
• Using "VOICE" may be difficult in a noisy
environment or at an emergency.
Using the Bluetooth audio
player _
4iiW Select "BY AUDIO."
If playback does not start, operate
the Bluetooth audio player to start
playback.
~
Reverse skip/forward skip
Pause/start playback*
f!9
vA
...
~
Enter the Bluetooth menu (see
page 27)
* Operation may be different according to the connected
Bluetooth audio player.
• Refer also to page 15 for connecting/disconnecting/
deleting a registered device.
• When the sound is stopped or interrupted while
using a Bluetooth device, turn off, then turn on the
unit.
- If the sound is not yet restored, connect the device
again (see page 15).
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only)
EXTERNAL DEVICES 17

Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD
changer to the CD changer jack on the rear of the unit.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Enter the list mode.
Select a disc, folder, then the track.
Playback starts automatically.
• Ifthere is no disc on the selected tray, the unit beeps.
[T urn] .... [Press]
• Repeat this procedure.
Preparation: Make sure "CH/IPOD" is selected in the "5ELEG 5RC" ..... "EXT IN" setting, see page 31.
..., Select "CD-CH."
• For MP3 disc: To select another folder/track while playing, repeat steps 2 and 3 above until the desired folder/
track is selected. The selection always start from disc number first.
Repeats all tracks of the current disc
Repeats current track
MP3: Randomly plays all tracks of
current folder, then tracks of next
folders
MP3: Repeats all tracks of current
folder
ALL RND Randomly plays all tracks
DISC RND Randomly plays all tracks of the
current disc
TRACKRPT
FOLDERRPT
• To cancel repeat play or random play, select
"RPT OFF" or"RND OFF."
• To return to the previous menu, press BACK.
[Turn] .... [Press]
I REPEAT .... RANDOM I
[Turn] .... [Press]
[Hold]
The playback mode menu is called
up.
MP3: Select folders
~ [Press]: Select track
~ [Hold]: Reverse/fast-forward track
3
2
• Selecting the playback modes
1
18

Listening to the Satellite Radio
Before operating, connect either one of the following (not supplied) to the CD changer jack on the rear ofthis unit.
• JVC SIRIUS Satellite Radio System, SC-C1 and KS-SRA 100, PnP, SC-VDOCl and KS-SRA 100, for listening to the
SIRIUS Satellite Radio.
• XM Satellite Radio System, JVC Smart Digital Adapter-XMDJVC100, CNP2000UC and CNPJVCl for listening to
the XM Satellite Radio.
§gjGlobal Controllnformationl update
•If channels are updated after subscription, updating starts automatically. "UPDATING" or "UPDATE XXX%" flashes
and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your Satellite Radio.
Activate your SIRIUS subscription after
connection
1 <!>/m
•
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
21
<!>/ATT
19
SIRIUS Satellite Radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite Radio tunes in to
the preset channel, CH184.
3 Check your SIRIUS 10 (see page 29).
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888·539·SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls on the display
once subscription has been completed.
2 r-- XM-·····----········
a •• ., L- !
XM Tuner* starts updating all the XM channels.
"Channell" is tuned in automatically.
3 Check your XM Satellite Radio 10 labelled
on the casing of the XM Tuner, or tune in to
"Channel 0" (see page 20).
4 Contact XM Satellite Radio on the internet
at <http://xmradio.com/activation/>to
activate your subscription, or you can call
1-800-XM-RAOIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
* XM Tuner: XMDirect 1M Tuner Box or XMDirect2 Tuner
System
EXTERNAL DEVICES

Select "SIRIUS" or "XM."
Select a category.
SIRIUS: If you select" All," you can tune in to all the channels of all categories.
Select a channel to listen •
• Holding the button changes the channels rapidly.
• While searching, invalid and unsubscribed channels are skipped.
XM: If you do not select a channel within 15 seconds, category selected in step 2
is canceled. You can select all channels of all categories now (including non-
categorized channels) .
• Storing channels in memory
You can preset up to 18 channels for both SIRIUS and
XM.
Ex.: Storing channel into preset number "P04."
1 Tune in to a channel you want to store (see
steps 1- 3 above).
2 Select preset number.
• Checking the XM Satellite Radio 10
While selecting "XM," select "Channel 0."
The display alternately shows "RADIO 10" and the
8-digit (alphanumeric) 10 number.
[Turn] -+ [Press]
3
[Hold]
[Turn]
To cancel the 10 number display, select any channel
other than "Channel 0."
Selecting SIRIUS/XM preset station
20